Samsung Dcs 50si Lcd24b, Lcd12b, Std24b, Basic 12b, 7b Keyset User Guide

• LCD 24B
 LCD 12B
 STD 24B
 BASIC 12B
7B
KEYSET USER GUIDE
February 2000
SAMSUNG DCS 50si
DIGITAL COMMUNICATIONS SYSTEM   

TABLE OF CONTENTS
ABOUT THIS  BOOK
........................................................... 1
THINGS YOU SHOULD KNOW
................................ 2–9
OUTSIDE CALLSMaking an Outside Call .................................................................... 10
Answering an Outside Call ............................................................... 10
Universal Answer ............................................................................. 10
Recall/Flash...

CUSTOMIZING YOUR  KEYSETAME BGM ........................................................................................ 32
AME Password ................................................................................ 32
Select Ring Tone .............................................................................. 32
Change Your  Passcode .................................................................... 32
Set Answer Mode ................................................................................

THINGS YOU SHOULD KNOW
USER ORIENTATIONDCS 50si telephones are called “keysets.” They contain buttons or “keys” that
are used to access or activate the many features of your office phone system.
The keys with paper designation strips are programmable keys. This means
they can be programmed for a specific function on your keyset and that same
button can be something different on another keyset. See the system manager
to get your most frequently used features assigned to your programmable keys.
When...

4
5
LCD 24B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
VOL
SPK
HOLD TRSFANS/
1
2ABC
3DEF
4GHI
5JKL
6MNO
7PRS
8TUV
9WXY
0OPER
RLS
SCROLL
HOLD KEY
TRANSFER KEY
ANSWER/RELEASE KEY
PULLOUT
DIRECTORY TRAY
32 CHARACTER DISPLAY
Two
lines with 16 characters each. SOFT KEYS
Used to
activate features via
the display....

6LCD 12B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
7
STD 24B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
VOL
SPK...

8BASIC 12B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
9
7B KEYSET LAYOUTLABELING PROGRAMMABLE KEYSInser t the end of a paper clip into the notch of the clear cover.
Push the cover sideways. Lift the cover and remove the desig-
nation strip. Label the designation strip. Replace the strip and
cover.
DIGITAL...

OUTSIDE CALLS
MAKING AN OUTSIDE CALL Lift the handset and press an idle outside line button, line group button or
dial a line access code to receive dial tone—OR—to use the speakerphone,
press an idle outside line button, line group button or dial a line access code
to receive dial tone through the speaker—OR—press SPK or the MONITOR
key if you are using a 7B phone, receive intercom dial tone and dial a line
access code.
 Dial the telephone number.
 Finish the call by replacing the handset or pressing...

INTERCOM CALLS
CALLING OTHER STATIONS Dial the extension number or group number.
 Wait for the par ty to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.
 Finish the call by replacing the handset or pressing the ANS/RLS or the
MONITOR key if you are using a 7B phone.
NOTES:
1. If you have a DSS key assigned to an extension or station group, you may
press this key instead of...

CALL PROCESSING
SYSTEM HOLD When you are connected to any call, press HOLD. The call will flash green at
your keyset. If this call appears on a line key at other keysets, it will flash
red at those keysets.
 To take the caller off hold, press that key and the green flashing light will go
steady green again. Resume the conversation.
NOTE: While on a call, pressing a line key, route key or flashing CALL button
will automatically put your first call on hold and connect you to the new call. SeeAutomatic...