Samsung Digimax S1000 Users Manual

]30
^
+ / - button

ƒSelecting a White Balance
1. Press the + / - button, and then use the UP and
DOWN buttons to select the white balance icon 
(           ). The white balance menu bar will appear
as shown.
2. Use the LEFT and RIGHT buttons to set the
white balance to the desired value. The value
you set wil be displayed on the LCD monitor.
AUTO : The camera automatically selects the appropriate white
balance settings, depending on the prevailing lighting
conditions.
DAYLIGHT : For taking images...

ƒUsing the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. 
You can select the most appropriate white balance setting for a given shooting
environment by setting up the custom white balance.
ˆExposure compensation : This camera automatically adjusts the exposure
according to the ambient lighting conditions. 
You can also select the exposure value by using the 
+ / - button.
3. Press the + / - button again. The value you set will be saved and the...

]32
^
Using the LCD monitor to set the camera settings
How to use the menu
4. Select a sub menu, and then the value you set will be saved. Press the
MENU button and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera
mode appears. However, there is no menu for Voice Recording mode (          ).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the
UP or
DOWN
button.Press the
UP or
DOWN
button.Press the
LEFT or
RIGHT
button.Press the
LEFT...

[ STILL IMAGE mode ]
QUALITY
Super Fine
Fine
Normal
[ MOVIE CLIP mode ]
FRAME RATE
30FPS
15FPS

ˆYou can select the compression ratio appropriate for your application of the
captured images.
The higher the compression ratio, the lower the picture quality.IconSub menu
Super Fine
Fine Normal 30FPS 15FPS
File Format
jpeg jpeg jpeg avi avi
STILL IMAGE mode
ModeMOVIE CLIP mode

ƒThis file format complies with the DCF (Design rule for Camera File
system).

ƒJPEG (Joint Photographic Experts Group)  : JPEG is...

]34
^
Metering
Continuous shot

ˆYou can select continuous shot, and AEB (Auto Exposure Bracketing).
- Single  : Take one picture only
- Continuous  : Images will be taken continuously until
the shutter button is released. The
shooting capacity depends on the
memory.
- AEB  : Take three pictures in a series in
different exposures: standard
exposure(0.0EV), short exposure 
(-0.5EV) and over exposure (+0.5EV).
Use the mode if it is hard to decide exposure of the object. 

High resolution and picture...

]35
^
Sharpness
OSD (On Screen Display) information

ˆIdle mode : If you select the [LCD Save] and the
camera isnt operated during the
specified time(about 30 SEC.), the
camera power will be idle (LCD monitor :
OFF, Camera status lamp : Blinking)
automatically.
- To use the camera again, press any of the
camera buttons except the power button.
- If there is no operation during the specified time, the camera power will be
turned off automatically to save battery life. Refer to page 56 for more...

]36
^
Starting play mode

ƒPlaying back a movie clip
Steps from 1-2 are the same as those to play back
a still image.
3. Select the recorded movie clip and press the
Play & Pause button (              ) to play back. 
- To pause a movie clip file while playing it back,
press the play & pause button again.
- Pressing the play & pause button again will
cause the movie clip file restart.
- To rewind the movie clip while it is playing,
press the LEFT button. To fast forward the
movie clip, press the RIGHT...

]37
^
Starting play mode

ˆMovie clip capture function : capture still images from the movie clip.

ƒHow to capture the movie clip
Steps 1-3 are the same as those for playing back
a movie clip.
4. Press the Play / Pause button while playing the
movie clip. Then press the E button.
5. The paused movie clip is saved in a new file
name.

The captured movie clip file has same size as
the original movie clip (640X480, 320X240,
160X128).
[Paused]

ƒIf you want to extract the movie clip at the beginning of...

]38
^
Starting play mode LCD  monitor Indicator

ƒPlaying back a recorded voice
Steps from 1-2 are the same as those to play
back a still image.
3. Select the recorded voice file and press the
Play & Pause button (             ) to play back  a
recorded voice file.
- To pause a recorded voice file, while playing
it back, press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button. 
To...

]39
^
[ Thumbnail display mode ]
Using the camera buttons to set the camera
Thumbnail(        ) / Enlargement (        ) button 

ˆIn Play mode, you can use the buttons on the camera to conveniently set up the
Play mode functions.
ƒImage enlargement
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the thumbnail button will zoom back to
the original full sized image.
- You can tell...