Home > Samsung > Digital Camera > Samsung Digimax S700 Users Manual

Samsung Digimax S700 Users Manual

Here you can view all the pages of manual Samsung Digimax S700 Users Manual. The Samsung manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.

Page 51

]50^
PictBridge : Picture Selection
PictBridge : Print Setting
Exit:Shutter Set:OK
ƒSetting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
PREV
NEXT
0
Exit:Shutter Set:OK
0
AUTO SET
No
YesExit:MENU         Move:   


ˆAUTO SET
1. Use the LEFT and RIGHT buttons to select the 
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK...

Page 52

]51^
PictBridge : Print Setting PictBridge : Printing
ˆPrinting Pictures
1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired sub menu value, and
then press the OK button.
[Standard] : Print the pictures stored in the
memory card in set numbers. 
One picture is printed on one piece
of paper.
[Index] : Print multiple images on one sheet
of paper.
3. The screen shown on the right will appear and the
picture will be printed. If no picture...

Page 53

]52^
PictBridge : Printing Setup menuPictBridge : Reset
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings will
be reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
RESET...

Page 54

]53^
Setup menu
Menus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu Page
Computer
-
Printer
-
Off
-
On
-
Dark
-
Normal
-
Bright
-
NTSC -PAL -
Quick View Off / 0.5, 1, 3 sec -
p.57
No
-
Yes
-
Alkaline
-
Ni-MH -
AF Lamp
LCD
Video Out
Reset
Battery typep.56
p.56
p.57
p.58
p.58USBp.56
ƒAssigning File Names
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.
3. Select...

Page 55

]54^
Setup menu
[ Auto power off ]ˆThis function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
ƒSub menus
[Off] : The power off function will not
operate.
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
- After replacing the battery, the power off setting will
be preserved. 
- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a...

Page 56

]55^
[ Formatting a memory ]ˆThis is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƒSub menus
[No] : The memory will not be formatted. Press the
menu button three times and the menu
display will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will...

Page 57

]56^
Setup menu
[ Sound ]ˆIf you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
ƒ[Sound] sub menu : Off / Low / Medium / High[ Connecting an External Device (USB) ]ˆYou can select an external device to which you want to connect the camera
using the USB cable.
ƒSub menus
- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 68 for instructions on
how to connect...

Page 58

]57^
[ Selecting Video out type ]ˆThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
ˆConnecting to an external monitor
ƒUsing the USB cable with Cradle (Optional) : 
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied AV
cable.
ƒUsing the AV cable with Camera : Connect the
camera to an external...

Page 59

]58^
Setup menu
Setting up the Mycam menu
[ Initialisation ]ˆAll camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be
changed.
ƒSub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
SETUP
AF Lamp
LCD
Video Out
Quick View
ResetBack:
Set:OK
No
Yes
[ Selecting a battery type ]ˆIf a battery type is selected, the camera will be optimized according...

Page 60

]59^
Start up soundShutter sound
Important notes
ˆYou can select the sound that is activated whenever the camera is turned on.
ƒStart up sound : [Off], [Sound 1], [Sound 2], 
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may have
set these to on. 
ˆYou can select the shutter sound.
ƒShutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
MYCAM
Start Image
Start Sound
Shutter SoundOff
Sound 1
Sound 2
Sound 3Back:
Set:OK
MYCAM
Start Image...
Start reading Samsung Digimax S700 Users Manual

Related Manuals for Samsung Digimax S700 Users Manual

All Samsung manuals