Samsung Digimax U CA3 User Manual

41
Effect 
Sharpness
You can adjust the sharpness of the picture you want to take.
You cannot check the sharpness effect on the LCD monitor
before you take a picture, because this function is applied only
when the captured image is stored on the memory. You can
select from AUTO and MANUAL modes. 
Sub menu Icon  Description 
The edges of the image are softened. 
This effect is suitable for editing images on your PC.
The edges of the image are sharp. 
This is suitable for printing.
The edges of the image...

42
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button (         ). 
The camera can now play back the images stored in the memory. 
If you have turned on the camera by pressing the POWER button, you can press the PLAY
button once to switch to Play mode and press it  again to switch to Recording mode. 
If you have turned on the camera by pressing the PLAY button, you can press the PLAY button
again to turn off the camera. 
You can set up the PLAY mode function by...

43
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (        ) will be displayed on the
LCD monitor.
4. Press the play & pause button (          ) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press the
play & pause button again.
- Pressing the play & pause button...

44
LCD monitor indicator
The LCD monitor displays information about the shooting conditions.
No. Description Icon Page 
1 Battery P.15
2 Play mode
3 File Type
4 Voice memo P.46
5 Protect indicator P.52
6 DPOF indicator P.56
7  Stored image number
SIZE : 2048X1536 Size 
AV : F2.8 Aperture value
TV : 1/60 Shutter speed
ISO : 100  ISO sensitivity
FLASH : OFF Whether or not the
flash is used. 
DATE : 03/09/01 Recording date
9
If you press the LCD button, you can check the following recording information:...

45
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an enlarged
view by checking the image enlargement...

46
Thumbnail(      ) / Enlargement(      ) button 
The maximum enlargement rate in proportion to the image size.
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Press the MENU button and a message will be displayed
as shown alongside.
4. Press the OK button to save the trimmed image with a
new file name. The...

47
Voice(     ) memo / Up button
3. Press the shutter button to start recording. The [REC]
message will be displayed on the LCD monitor (as shown)
and voice will be recorded to the still image for 10
seconds.
4. The recording can be stopped by pressing the shutter
button again.
5. The (        ) icon will be displayed on the LCD monitor after
voice memo recording has finished. 
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best...

48
LEFT / RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an auxiliary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial...

49
Delete(     ) button
This deletes images stored on the memory card.
Before deleting images from the camera, you should protect or download images to
your computer that you wish to keep.
INFORMATION 
Deleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and
then press the DELETE (       ) button.
2. The following message will be displayed on the LCD monitor.
3. Press the OK button to delete the image. The image that precedes the...

50
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the
MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are
as follows. To capture an image after setting up the play menu, press the PLAY button.
The items indicated by                        are default settings.
Menu tab Main menu Sub menu Secondary menu Page
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SLIDE PROTECT
RESIZE
ROTATE DEL....