Samsung Digimax U CA3 User Manual

							51
Setting up the play back function using the LCD monitor
Menu tab Main menu Sub menu Secondary menu Page
ONE PIC -
ALL PICS -
DEFAULT -
POSTCARD
4X6, 8X10
A6, A4, B5
FULL
1, 2, 4, 6, 8
INDEX
PLAIN
PHOTO
FASTPHO.
DRAFT
NORMAL
FINE
ON
OFF
ON
OFF
-
-
NO -
YES -
Menus are subject to change without prior notice.
P
I
C
T 
B
R
I
D
G
EC
U
S
T
O
M 
p. 59
p. 60
p. 58
p. 58
p. 58
SETUP
PRINT IMAGES
DPOF PRN
RESETSIZE
LAYOUT
PAPER
QUALITY
DATE
FILENAME
Downloaded From camera-usermanual.com Samsung Manuals 
						

							52
Deleting all images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. (The files that were stored in the AVATAR folder will not be deleted.)
Deleting all images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DEL.ALL]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button. 
Selecting [NO] : The display returns to the initial menu.
Selecting [YES] :  A delete confirmation window will
appear. When you press the OK button,
a [PLEASE WAIT!] message will
display while all the unprotected images
are deleted. If there aren’t protected images, all the images are deleted
and a [NO IMAGE!] message will display. Press the PLAY button or slide
the Mode switch to clear the message.
Remember that this will permanently delete unprotected images. 
Important shots should be stored on a computer before deletion takes place.
The startup image is stored in the cameras internal memory (i.e., not on the memory
card) and it will not be deleted even if you delete all files on the memory card.
INFORMATION 
Protecting images
This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[PROTECT] menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[ONE PIC] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
[ALL PICS] : All of the stored images are protected or
unprotected.
DEL.ALL
NO
YES
MOVE: SET:OK
PROTECT
ONE PIC
ALL PICS
MOVE: SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							53
Protecting images
4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK] : Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can
protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER button,
the Image Protection menu will disappear.
- If you selected [ALL] in Step 3, the Image Protection menu will disappear. 
- If you protect an image, the protect icon(          ) will be displayed on the LCD monitor. 
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
- Slide Show Display Interval: OFF, 1 ~10 seconds
4. Use the UP and DOWN buttons to set whether to repeat
the slide show.
[ON] : 
Even once a cycle(from the first image to the last image)
is completed, the slide show will continue to repeat itself.
[OFF] : If a cycle is completed, the slide show will stop
automatically.
5. Press the OK button and the slide show will start.
- To pause the slide show, press the play & pause button. 
- To start the slide show again, press the play & pause
button again. 
- 
Press the menu button again and the slide show will stop.
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor. 
The [POWER OFF] function can
t be activated. 
While the slide show is playing, only the first frame of an MOVIE file is displayed.
In case of a voice file, the voice recording icon will appear.
INFORMATION 
Starting the slide show
LOCK
MOVE PIC:SET:OK EXIT:SH1
EXIT:MENU MOVE:    
OFF
01
SLIDE
BACK:SET:OK 
SECREPEAT
ON
OFF
SLIDE
Downloaded From camera-usermanual.com Samsung Manuals 
						

							54
Resize
A stored image size can be changed and used as a logo image.
The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
A Large image can be resized to be made smaller, but a small image cannot be resized
to become larger.
Only JPG images can be resized. MOVIE and WAV files can’t be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name. 
The start-up image is stored not on the memory card but on the internal memory.
Only one startup image can be saved. If you save a new startup image, the existing
startup image will be deleted. 
If the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
INFORMATION
Image Resize Types
Sub menu 1600X1200 1024X768 640X480 LOGO
Application For printing For wallpaperFor simple
storageFor the startup
image
RESIZE1600 X1200
1024 X 768
640 X 480
MOVE: SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							55
Rotating an image
You can rotate the stored images by 90, 180, or 270 degrees.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [ROTATE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
If [OFF] is selected : Press the OK button to cancel the
image rotation.
If [ON] is selected : If you press the OK button, an
auxiliary menu from which you can select a rotation orientation will
appear. Use the UP and DOWN buttons to select the degree of
rotation. The image will be rotated according to the value you selected
and be displayed on the LCD monitor.   
[ Rotated 180 degrees ][ Rotated 90 degrees ][ Rotated 270 degrees ]
If you display the rotated image on the LCD monitor, empty spaces may appear to the
left and right of the image.
INFORMATION
DPOF : PRINT ORDER
DPOF stands for Digital Print Order Format. It allows you to save the picture printing
information in the DCIM/MISC folder on the memory card. You can select the picture you want
to print using this information and specify the number of copies to print.
The DPOF indicator will display on the LCD monitor when an image that has DPOF information
plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.
This function is not available for Movie clips and WAV files.4. Press the OK button. The rotated image will be saved with a new file name and the menu
will disappear.
: Rotate 0: Rotate 90: Rotate 180: Rotate 270
ROTATE
OFF
ON
MOVE: SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							56
DPOF : STANDARD
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [STANDARD] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select [ONE PIC] or
[ALL PICS], and then press the OK button. A window for
selecting number of copies.
[ONE PIC] : Set the number of copies to print for the
current picture only.
[ALL PICS] : Set the number of copies to print for each
picture, excluding movie clips and voice
recordings.
5. Use the UP and DOWN buttons to select the number of
copies and then press the OK button.
- If you selected [ONE PIC] in Step 4, you can use the
LEFT and RIGHT buttons to set the number of copies to print for the previous or the next
picture. Press the SHUTTER button. The Number of Copies setup menu will disappear.
- If you selected [ALL] in Step 4, the Number of Copies setup menu will disappear.
- The DPOF icon (          ) will appear by the pictures for which the number of copies to print
is set.
6. Press the MENU button twice and the menu will disappear.
Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [INDEX] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [NO] is selected : The image will be printed in standard
print format.
If [YES] is selected : The image will be printed in index
format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF : INDEX
01 PRINTS
DPOFSTANDARD
INDEX
SIZEONE PIC
ALL PICS
BACK:
SET:OK
DPOFSTANDARD
INDEX
SIZENO
YES
BACK:
SET:OK
EXIT:SH1
MOVE PIC:SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							57
DPOF : PRINT SIZE
You can specify the print size when printing images stored on the memory card.
The print size you set will be applied to all pictures stored on the memory card.
Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [SIZE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
SIZE: DEFAULT, 3X5, 4X6, 5X7, 8X10
5. Press the OK button to confirm the setting.
6. Press the menu buttoAn twice and the menu will disappear.
You can cancel the [STANDARD], [INDEX], or [SIZE] settings.
Cancel the setting to reset the value to its default.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [CANCEL] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected : Cancels the standard
print setting.
If [INDEX] is selected : Cancels the index print setting.
If [SIZE] is selected : Cancels the print size setting.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
DPOF : CANCEL
DPOFSTANDARD
INDEX
SIZE3X5
4X6
5X7
BACK:
SET:OK
DPOFINDEX
SIZE
CANCELSTANDARD
INDEX
SIZE
BACK:
SET:OK
* The [DEFAULT] print size varies depending on the printer manufacturer. 
For your printers default value, please refer to the users guide that came with your printer.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							58
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
You can set up the following settings from the PictBridge menu.
IMAGES : Setting up the scope of PictBridge
PRINTER SETUP : Setting up printing
PRINT : Printing pictures
DPOF AUTO PRINT : Printing the DPOF files
RESET : Initializing the PictBridge functions
Connecting the Camera to a Printer
1. Press the POWER button to turn on the camera.
2. In a mode other than Voice Recording mode, press the
MENU button.
3. 
Press the LEFT/ RIGHT button and select [SETUP] menu tab.
4. Select [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
5. Select [PRINTER] menu by pressing the UP/ DOWN
button and press the OK button.
6. Press the menu button twice and the menu will disappear.
7. Use the supplied USB cable to connect the camera to the
printer as shown below.
8. Turn on the printer to connect the camera to the printer.SETUPVIDEO
Q.VIEW
USBCOMPUTER
PRINTER
BACK:
SET:OK
If you selected [Computer] in Step 5, when you connect the camera to your printer, the camera
status lamp (red) will blink and the connection will not be established. In this case, disconnect
the USB cable, and then follow the procedure from Step 2 and onward.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							59
PictBridge: Picture Selection
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select [IMAGES], and
then press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function will be applied only to the picture
currently displayed.
When [ALL PICS] is selected : The PictBridge function will be applied to all pictures,
excluding movie clips and voice files.
Setting the Number of Copies to Print
- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print
will appear as shown below. 
- 
Use the UP and DOWN buttons to select the number of copies to print and then press the OK button.
The number of copies you wish to make: 30
Unless you press the OK button, the changed number of prints will not be applied. 
- When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to
the previous or next picture. 
- Press the SHUTTER button to return to the PictBridge menu. 
You can select the scope of the PictBridge function.
[ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ]
EXIT:SH1SET:OK
PICTBRIDGE
IMAGES
SETUP
PRINTONE PIC
ALL PICS
BACK:
SET:OK
01 PRINTS
EXIT:SH1
MOVE PIC:
SET:OK
01 PRINTS
Downloaded From camera-usermanual.com Samsung Manuals 
						

							60
PictBridge: Print Setting
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File
Name Print menus for printed pictures.
Menu Function Sub menu
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select [PRINTER
SETUP], and then press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
If [DEFAULT] is selected
: The print format will be set to the printers default
values.
If [CUSTOM] is selected
: A window from which the user can set up the print
format with the desired values will appear.
Use the UP and DOWN buttons to select a
submenu value, and then press the RIGHT button.
Auxiliary menus will appear.  Use the UP and DOWN buttons to select the desired
auxiliary menu, and then press the OK button. 
The menus you can set up are as follows:
SIZE Setting the size of the printing paper
Setting the number of pictures to be printed on a 
sheet of paper
Setting the quality of the printing paper
Setting the quality of the picture to be printed
Setting whether to print the date
Setting whether to print the file namePOSTCARD, 4X6, 8X10, A6, A4,
B5
FULL, 1, 2, 4, 6, 8, INDEX
PLAIN, PHOTO, FASTPHOTO
DRAFT, NORMAL, FINE
ON, OFF
ON, OFF LAYOUT
PAPER
QUALITY
DATE
FILENAME
Depending on the manufacturer and model of your printer, some menus are inaccessible. 
Even though these menus will still appear on the LCD monitor, but you will not be able to select them. 
PICTBRIDGE
IMAGES
SETUP
PRINTDEFAULT
CUSTOM
BACK:
SET:OK
CUSTOM
BACK:SET:OK
SIZE
LAYOUT
PAPER
QUALITY
DATEPOSTCARD
4X6
8X10
A6
A4
Downloaded From camera-usermanual.com Samsung Manuals