Samsung Digimax U Ca5 Users Manual

							101
Before contacting a service centre
The camera buttons do not operate
Camera malfunction
Remove /re-insert batteries and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card 
The images dont play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is different to the original scene 
White balance setting is incorrect
Select appropriate White balance
Images are too bright
Exposure is excessive
Reset exposure compensation
No image on external monitor
The external monitor has not been connected properly with the camera
Check the connection cables
There are incorrect files in the memory card
Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
Cable connection is incorrect
Check the connection
The camera is off
Turn the camera on
The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3.
Alternatively the PC does not support USB
Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3 to PC that supports USB
The camera driver is not installed
Install a [USB Storage Driver]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							102
Specifications
Type 1/2.5 CCD
Effective Pixel Approx. 5.13 Mega-pixel  
Total Pixel Approx. 5.25 Mega-pixel
SHD Lens f = 5.8 ~ 17.4mm    
(35mm film equivalent : 35 ~ 105 mm)
F No. F2.8 ~ F4.8
Still Image mode : 1.0X ~ 5.0X     
Play mode : 1.0X ~  10.1X (depends on image size)
LCD Monitor 1.8 colour TFT LCD (118,080 dot)
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 5 ~ 80cm (Wide), 50 ~ 80cm (Tele)
Auto Macro : 5cm ~ infinity (Wide), 50cm ~ infinity (Tele)
Type Mechanical and Electronic shutter
Speed 1 ~ 1/2,000 sec. (Night Scene mode : 16 ~ 1/2,000 sec.)
Program AE
Metering : Multi, Spot
Compensation2EV (0.5EV steps)
ISO Equivalent  Auto, 100, 200, 400
Auto, Auto & Red-eye reduction, 
Fill-in, Slow sync, Off, SF
Range Wide : 0.3 ~ 3.0m,  Tele : 0.5 ~ 2.0m
Recharging Time Approx. 5.5 sec.
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sepia, Negative, RGB 
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording (max. 1 hour)
Voice Memo in Still Image (max. 10 sec.)
Date Imprinting Date&Time, Date, Off (user selectable)
Modes : Auto, Manual, Scene
Scene : Night, Portrait, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach/Snow
Continuous : Single, Continuous
Self-timer : 2 sec., 10 sec., Double, Remote control
With audio (recording time : memory capacity dependent)
Movie Clip Size : 640x480, 320x240, 160x128
Frame rate : 30 fps, 15 fps
Media SD Card/MMC (Up to 1GB guaranteed)
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : AVI (MPEG-4)  Audio : WAV(voice memo)
Image 
Sensor
LensFocal Length
Range
Control
Modes Digital Zoom
Focusing
Shutter
Exposure
Flash
Voice Recording White Balance
Shooting
StorageStill Image
File Format
Downloaded From camera-usermanual.com Samsung Manuals 
						

							103
Specifications
2592 : 2592x1944,  2272 : 2272x1704,    
2048 : 2048x1536,  1600 : 1600x1200, 
1024 : 1024x768,  640 : 640x480
2592 : Super fine 11,   Fine 21,   Normal 33
2272 : Super fine 14,   Fine 26,   Normal 40
2048 : Super fine 17,  Fine 33,   Normal 50
1600 : Super fine 30,  Fine 51,   Normal 75
1024 : Super fine 60,  Fine 106,   Normal 129
640 : Super fine 121,  Fine 165,   Normal 202
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Single image, Thumbnails, Slide show, Movie Clip,  
Album Organization
Editing Trimming, Resizing, Rotating
Digital output connector : USB 2.0
Audio : Mono      Video output : NTSC, PAL (user selectable)
DC power input connector : 4.2V
Rechargeable battery : 1 x Li-ion (SLB-1137)
Adaptor : DC 4.2V, 750mA (SAC-41)
* Included power source may vary depending on sales region.
Dimensions (W X H X D) 102.2 x 54.7 X 29.6mm(excluding the projecting parts of the camera)
Weight Approx. 130.6g (without batteries and card)
Operating Temperature 0 ~ 40˚C
Operating Humidity 5 ~ 85%
Camera DriverStorage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.2 ~ 10.3)
Software Digimax Viewer, Digimax Reader,
Arcsoft PhotoImpression 
SF(Safety Flash)
New Charging System (Cradle(Optional))
MPEG-4 VGA 30fps Movie Clip (supporting Edit on DSC)
Special Effect (Highlight, Composite, Photo Frame)
Quick Mode Change (M button)
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
Capacity 
(32MB) Image Size
Storage
Interface Image PlayType
Power Source
Special FeaturesApplication
Downloaded From camera-usermanual.com Samsung Manuals 
						

							104
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. 
We cannot, however, be held responsible in any way for damage caused by inappropriate
use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is
not covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows For Macintosh
Power Mac G3 or later
Windows 98/98SE/2000/ME/XP Mac OS 9.2 ~ 10.3
Minimum 32MB RAM (XP : 128MB) Minimum 64MB RAM
140MB of available hard-disk space 110MB of available hard-disk space
USB port USB port
CD-ROM drive CD-ROM drive
QuickTime player
DivX(for movie clip)
PC with processor better than MMX 
Pentium 233MHz (XP : Pentium II 300MHz)
800x600 pixels, 16-bit colour display
compatible monitor (24-bit color display
recommended)
Downloaded From camera-usermanual.com Samsung Manuals 
						

							105
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.2 ~ 10.3.
XviD codec : This makes movie clips(MPEG-4) recorded with this camera play back on
a PC.
To play back a movie clip recorded with this camera, you must install the XviD codec. If a
movie clip recorded with this camera does not play well, install this code. This software is only
compatible with Windows. 
If a movie clip can’t play back on the Mac OS, please visit the following site.
http://www.divx.com/divx/mac/
Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							106
About the software
Be sure to check the system requirements before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
INFORMATION
Digimax Reader : Text recognition program
You can save an image file that was captured in the TEXT mode as a text file with this
program. This software is only compatible with Windows.
PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							107
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
INFORMATION
2. Installation is complete.
Click the [Finish] button.
[Click !]
[Click !]
3. A windows to check whether the PC has XviD codec or not
will display.  
[Preview] : You can check the movie clip display
condition. 
[Install] : The XviD codec is installed. 
[Cancel] : 
The XviD codec is not installed and a window for
installing the application softwares will display.
If you didn’t click the [Preview] button, the [Install] button can’t be selected. 
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							108
6. The Software License Agreement window will be
displayed. If you agree to this, select [I accept the
agreement] and click [Next>] button. the window will
then move to the next step. If you disagree, select [I do
not accept the agreement] and click [Cancel] button.
The installation program will be cancelled.
The XviD codec is distributed according to the GNU General Public License and everyone
can copy, distribute and change this codec. For more information, see the License
documents. 
[Click !]
4. If an error listed below takes place during the preview,
click the [Install] button to install the XviD codec. 
- Only a voice plays back. 
- An error message displays and the movie clip does
not play back. 
* A window shown alongside may display according
to the system requirements.
5. The XviD codec installation window will be displayed
as shown alongside. Click the [Next(N)>] button. 
Setting up the application software
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							109
Setting up the application software
7. The XviD information window will display. 
Click the [Next>] button. 
8. The destination selection window will open. 
Click [Next >] button.
To copy to the files to another folder, click [Browse...]
and choose a folder you want.
[Click !]
[Click !]
10. The [Select Additional Tasks] window will display. 
Select the additional tasks and click the [Next>] button. 
9. A window will open, asking you to choose a folder to
which program icons will be added. 
Click [Next >] button. 
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							110
Setting up the application software
11. The XviD codec is ready to install. 
Click the [Install] button.
[Click !]
12. Installation is complete.
Click the [Finish] button.
[Click !]
If you select [Exit] at step 13, the application program installation will be cancelled.
INFORMATION 
13. A window where you can choose the program
you want to install will appear. Click [Install].
For information on application software, please
refer to page 105, 106.
14. The [Digimax Viewer 2.1] installation window
will be displayed as shown alongside. 
Click the [Next] button.
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals