Samsung Digimax V5 Users Manual

11
Identification of features
Front & Top
Back & Bottom
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the viewfinder. The picture will be
taken in the composition of the picture as it appears on the LCD monitor.
Viewfinder
Autofocus indicator lamp(Green)
Flash indicator lamp(Red)
Mode dial Mode dial lamp(Green)
Zoom W button
(Thumbnail)
5-function button Zoom T button
(Digital zoom)
Speaker
LCD...

12
Identification of features
PROGRAM modePlease select this mode for quick and easy picture taking
with minimal user interaction.
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all
functions except the iris and shutter speed.
AUTO mode
You can select the desired working mode by using the mode dial located on the back of the
camera. This digital camera has 8 recording modes. These are listed below.
Side/ 5-function button
Mode dial
Battery...

13
Identification of features
Aperture priority / Shutter priority / Manual mode
The Aperture and Shutter can be set manually in the A/ S/ M
mode.
A/S/M mode
This mode allows users to save frequently used shooting
settings for later use.
MySET mode
A voice recording can be recorded for as long as the available
recording time of the memory capacity allows.(Max : 1 hour)
Voice recording file type : *.wav
VOICE RECORDING mode
A movie clip can be recorded for as long as the available
recording time of the...

14
Identification of features
Self-timer lamp (Based on 10-second Self-timer; see p. 35)
Color Status Camera Status
Blinking
- For the first 7 seconds, the LED blinks at 1second intervals.
- For the final 3 seconds, the LED blinks quickly at 0.25-second
intervals.
Red
Color Status Camera Status
BlinkingRecording Mode (lightly press the shutter button): Not focused
PC Mode: Transmitting Data
Recording Mode (lightly press the shutter button): Focused 
On Green
Color Status Camera Status
Blinking
Flash in...

15
Connecting to a Power Source
Important information about battery usage
It is easy to buy alkaline batteries. However, the duration for using batteries varies in
accordance with the battery manufacturer or the photographic conditions.
When the camera is not used, turn off the camera power.
Do not recharge the non rechargeable batteries. It may cause an explosion.
Please remove the batteries if the camera will not be used for long periods. Batteries can
lose power over time and are prone to leaking if...

16
Connecting to a Power Source
Battery status Battery indicator
The batteries are fully
charged.Prepare new batteries.There is no battery capacity.
Replace with new batteries.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
3. To close the battery chamber cover, push it until it clicks.2. Insert the batteries taking note of the
polarity (+ / -). 1. Open the battery chamber cover by pushing in the direction of the
arrow. : If the camera does not turn on after you have...

17
Instructions on how to use the memory card
Be sure to format the memory card (see p. 81) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card. 
Wear...

18
Instructions on how to use the memory card
If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
Don’t remove the memory card when the Auto focus lamp(Green) is blinking as this may
cause damage to data in the memory card.
INFORMATION
[ SD(Secure Digital) memory card ] Write
protect
switch
Label
Card
pins
Mode 
Quality/Size 2560 2272 2048 1600 1024 640 640x480 320x240
TIFF 2 2 3 5 12 27 - -
Super fine 11 14 17 28 64 129 - -
Fine 22 28 33 53...

19
Inserting the memory card
1. Slide the power switch to turn the power off.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover. 3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do not
attempt to insert it by force. Check the direction of insertion,
and then insert it correctly.
Do not insert the memory card the wrong way round. Doing
so...

20LCD monitor indicator
[ Image & Full Status ]
No. Description  Icons  Page1 Battery p.163 Camera shake warning p.264 Flash p.335 Self-timer p.356 Voice memo p.297 Macro p.308 Metering p.509  Manual focus   p.3810 Sharpness p.5211  Auto focus frame12  Date/ Time 2004/03/01    01:00 PM p.82
13 Exposure compensation p.41The LCD monitor displays information about the shooting functions and selections.
Recording mode
2
p.12~13
Downloaded From camera-usermanual.com Samsung Manuals