Samsung Gear 1 Owners Manual

Getting Started       7 3.Carefully place the device onto the cradle (3), making 
sure to align the connector plates to the charging pins. 
4.Firmly close the cover (4).
5.Insert the power plug into a compatible electrical 
outlet.6.Insert the USB connector into the Charging cradle’s 
charger jack.
USB Connector
Power Plug
Release Switch
Charger Jack 

8
Caution! Connecting the charger improperly may cause 
serious damage to the device. Any damage caused 
by misuse is not covered by the warranty.
7.Plug the charging head into a standard AC power 
outlet. The device turns on and indicates its charge 
state.
Note: While charging, you cannot use calling features, voice recorder, and camera.
8.When charging is finished, first unplug the charger’s 
power plug from the AC wall outlet, then disconnect 
the charger’s connector from the device.
Tur ning Your...

Getting Started       9
Turning Your Device Off
1.With the device on, press and hold   
(
Power/Home) until the Device options screen appears.
2.Ta p  
Power off () ➔ OK.
Restarting Your Device
1.With the device on, press and hold   
(
Power/Home) until the Device options screen appears.
2.Ta p  
Restart () ➔ OK.
Checking the batter y charge status
With the device turned off, the current charge state is 
displayed on-screen. The following icons will show the 
current battery charge status when the Galaxy...

10 Once paired, its the Gear Manager application that provides a 
direct connection and access to setup/configuration menus 
for the Galaxy Gear.
Installing Gear Manager
1.Remove the Charging cradle from the packaging.
2.Turn on your smartphone and enable NFC 
communication.
3.Turn your Charging cradle around and tap it to the back 
of the smartphone.
4.Read the on-screen Installation information, then tap 
OK ➔ Install. 
5.If prompted, 
Accept Google’s app verification.
6.Confirm the 
Gear Manager...

Getting Started       11 4.Ta p   (
Accept) on the Galaxy Gear screen, confirm 
the PIN codes match, and tap 
OK on your smartphone 
to confirm the pairing request.
5.Read the on-screen legal and disclaimer information 
and accept the terms and conditions to complete the 
process.
6.Verify the Samsung Galaxy Gear entry now shows 
“Connected” within the Gear Manager application and 
the   icon appears at the top of your smartphone’s 
screen.
Note: If the connection process fails, restart both devices and...

124.Ta p   (
Accept) on the Galaxy Gear screen, confirm 
the PIN codes match, and tap 
OK on your smartphone 
to confirm the pairing request.
Important! If prompted to restore a connection, select Restore 
to update all settings and parameters from your 
smartphone.
DO NOT interrupt the restore process.
5.Read the on-screen legal and disclaimer information 
and accept the terms and conditions to complete the 
process.6.Verify the Samsung Galaxy Gear entry now shows 
“Connected” within the Gear Manager...

Getting Started       13
Wearing the Device
1.Thread the wristband through the Frame (1).
2.Slide your hand through the strap opening.
Caution! Humidity and liquids may damage your device. 
Keep your device dry.
3.Place the Metal Pin into the desired hole on the 
wristband (2).
Note: Use care when opening and closing the clasp.4.In a single motion, push the metal joint downwards 
(towards the back of the Galaxy Gear), and then push 
the buckle down towards until you hear a click.
Caution! Do not bend the...

14
Removing the Device
1.Firmly grasp both sides of the buckle.
2.Carefully pull the Buckle upwards and away from the 
wristband. This causes the metal joint to move 
upwards (away from the back of the Galaxy Gear). 
3.Slide the wristband out from the Frame.
Buckle
Speaker 

Understanding Your Device       15
Section 2: Understanding Your Device
This section outlines key features of your device. It also 
describes the device’s keys, screen and the icons that 
display when the device is in use.
Features of Your Device
Your device is lightweight, easy-to-use and offers many 
significant features. The following list outlines a few of the 
features included in your device.
Touch screen with virtual (on-screen) keypad
Brilliant 1.63-inch sAMOLED (320x320)
800MHz Processor
Android...

162.
Display shows all the information needed to operate 
your device, such as the number of wirelessly 
connected devices, number of received messages 
(along with date, time and phone number), and data 
usage.
3.
Wristband threads through the frame to secure the 
device to your wrist. 4.
Buckle secures the wristband. 
5.
Cradle Connector Plates (back of device) when 
connected to the connector pins on the cradle, 
provides charging to the device. 
6.
Speaker allows you to hear callers during a live...