Samsung H710 User Manual

Overscan
Used to display raw input signals from 480p, 576p, 720p, 1080i HD sources or scale to fit to 1280 x
720 resolution after cutting out certain boundaries using software scaling.
Picture Adjustment
Overscan
41
1
MENU
2, 3, 4
Select
2, 3, 4
…/†
5
EXIT
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Picture.
The Picturemenu is displayed.
Press the  button.
2
Press the or button to move to Overscan,
then press the  button.3
Press the EXITbutton to exit the menu.5...

Still Picture
Used to pause playback to see a still picture.
Picture Adjustment
Still Picture
42
Press the STILLbutton.
Each press of the button pauses and resumes play back.
One Touch
Downloaded From projector-manual.com Samsung Manuals 

VISUAL REALISM
Setup
Flipping/Reversal of Projected Image....44
Light Setting................................................45
Correcting Vertical Keystone....................46
Test Patterns..............................................47
Restoring the Factory Default Settings....48
Information..................................................49
Downloaded From projector-manual.com Samsung Manuals 

Flipping/Reversing the Projected Image
To support positioning of the projector, horizontal/vertical flipping and picture reversal are available.
Setup
Flipping/Reversing the Projected Image
44
Press the INSTALLbutton.
The screen will flip over horizontally or vertically with each
press of the button.
NOTE
This function is used to
set up reversed image
projection for ceiling
installation. To install
projector, refer to page
14.
One Touch
1
MENU
3, 4
Select
2, 4
…/†
5
EXIT
Front-FloorNormal Image...

Setup
Light Setting
45
1
MENU
2, 3, 4
Select
2, 3, 4
…/†
5
EXIT
Light Setting
Used to set the image brightness by adjusting the amount of light generated by the lamp.
TheaterUsed to reduce the brightness of the lamp in dark 
ambient light to prevent reflection in the eye. It also 
lowers power consumption and extends the life of the 
lamp.
BrightUsed to enhance the brightness in relatively bright 
ambient light.
Light Setting Mode
Press the MENUbutton.
The main menu is displayed.1
Press the or button...

Correcting Vertical Keystone
Used to compensate image shape when image distortion occurs.
Setup
Correcting V-Keystone
46
Press the V.KEYSTONEbutton.
Press the œor √button to adjust picture image optimally. 
One Touch
1
MENU
2, 3
Select
2, 3
…/†/œ/√
4
EXIT
NOTE
V-Keystone corrects
distortion of picture
image by software. 
It is better to install the
projector properly to
avoid distortion instead
of using the V-Keystone
feature.
Press the MENUbutton.
The main menu is displayed.1
Press the or button to...

Test Patterns
Generated by the projector itself. Utilized as installation basis for better installation of the projector.
Setup
Test Patterns
47
1
MENU
2, 3, 4
Select
2, 3, 4
…/†
5
EXIT
NOTE
The Crosshatch and
Screen Size patterns of
this projector are
provided by JKP (JK
Production).
The Red/Green/Blue
colors of the test
patterns are only for the
color adjustment
procedures, and may
not comply with the
actual colors displayed
during video playback.
Press the MENUbutton.
The main menu is displayed.1...

Restoring the Factory Default Settings
Used to restore setting values to factory defaults.
Setup
Restoring the Factory Default Settings
48
1
MENU
2, 3, 4
Select
2, 3, 4
…/†/œ/√
5
EXIT
NOTE
User settings includingEdit Nameand Custom
Picturewill be reset. 
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the EXITbutton to exit the menu.5
Press the or button to move to Factory
Default
, then press the...

Information
You can check external source signals, picture setup, PC picture adjustment and lamp use time. 
Setup
Information
49
Press the INFObutton.
1
MENU
2, 3
Select
2, 3
…/†
4
EXIT
One Touch
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the EXITbutton to exit the menu.4
Press the or button to move to Information,
then press the  button.
You can check external source signals, picture setup, PC...

Downloaded From projector-manual.com Samsung Manuals