Samsung Hl-r4667w, Hl-r5067w, Hl-r5667w, Hl-r6167w Dlp Tv Owners Instructions

							English - 71
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will
still be heard.) 
Press again to cancel.
NOTE
•In the PIP mode, the main and sub pictures are stilled at the same
time.
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 71 
						

							Picture Control
English - 72
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue
Screen” mode to “Off”.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Blue Screen”, then
press the ENTER button.
3
Press the …or †button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
Language : English
Time
V-Chip
Caption
Menu Transparency: Medium
Blue Screen : Off
Color Weakness
▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
On Off
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 72 
						

							Sound Control
BP68-00469A-02(054~073)  9/2/05  10:37 AM  Page 73 
						

							Sound Control
English - 74
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Adjusting the Volume
Press the VOL+ or VOL– button to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the MUTE
button again or press either the
VOL+ or VOL– button.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the automatic settings. See next
page.)
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Equalizer”, then 
press the ENTER button.
Continued...
Mute
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 74 
						

							English - 75
3
Press the œor √button to select a
particular item to be changed.
Press the …or †button to increase or
decrease the selected frequency.
Press the EXIT button to exit.
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset
at the factory. You can select “Custom”, which automatically recalls your personalized sound settings.
1
Press the MENU button. 
Press the …or †button to select
“Sound”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
Press the …or †button to select a 
particular item, then press the ENTER 
button.
Press the EXIT button to exit.
•Choose “Standard” for the standard factory settings.
•Choose “Music” when watching music videos or concerts.
•Choose “Movie” when watching movies.
•Choose “Speech” when watching a show that is mostly dialog (i.e., news).
•Choose “Custom” to recall your personalized settings.
Equalizer
MoveAdjustReturn Input
Picture
Sound
Channel
Setup
Listings
10 0 3 0 0 1 K 3 K 10 K
R 
L+
0
-
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom
Equalizer
SRS TSXT :  Off
Multi-Track OptionsAuto Volume :  Off
Internal Mute : Off
Digital Output : 
Dolby Digital▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Standard
Music
Movie
Speech
Custom
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 75 
						

							Sound Control
English - 76
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “SRS TSXT”, then 
press the ENTER button.
3
Press the …or †button to
select “Off”, “3D Mono” or
“Stereo”, then press the
ENTER button.
Press the EXIT button to exit.
NOTE
•Press the INFO button on the remote control to see the current 
status of sound settings.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom
Equalizer
SRS TSXT :  Off
Multi-Track OptionsAuto Volume :  Off
Internal Mute : Off
Digital Output : 
Dolby Digital▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Off3D MonoStereo
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 76 
						

							English - 77
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume
every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired
channel by lowering the sound output when the modulation signal is high or by raising the sound 
output when the modulation signal is low.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Auto Volume”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button. 
Press the EXIT button to exit.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom
Equalizer
SRS TSXT :  Off
Multi-Track OptionsAuto Volume :  Off
Internal Mute : Off
Digital Output : 
Dolby Digital▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
OffOn
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 77 
						

							Sound Control
English - 78
Choosing a Multi-Channel Sound (MTS) track
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks 
(for example, simultaneous translations of the program into foreign languages).
The availability of these additional “multitracks” depends upon the program.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3
Press the ENTER button to
select “Preferred Language”.
Press the …or †button to
choose the language
(English, Spanish or French)
you want, then press the
ENTER button. 
Press the EXIT button to exit.
Alternate method
Press the MTS button on the 
remote control. 
You can listen in a language
other than the favorite language
by pressing the MTS button.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Multi-Track Options
Preferred Language: EnglishMulti-Track Sound: Stereo
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
SpanishFrench
English
Digital
English
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 78 
						

							English - 79
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Multi-Track Options”,
then press the ENTER button.
3Press the …or †button to
select “Multi-Track Sound”,
then press the ENTER button.
Press the …or †button to
select a setting you want,
then press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the MTS button on the
remote control repeatedly to select
an external signal source.
NOTES
•Choose “Mono” for channels that are broadcasting in mono, or 
if you are having difficulty receiving a stereo signal.
•Choose “Stereo” for channels that are broadcasting in stereo.
•Choose “SAP” to listen to the Separate Audio Program, which is
usually a foreign-language translation.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Multi-Track Options
Preferred Language: EnglishMulti-Track Sound: Stereo
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
MonoStereoSAP
Stereo
Analog
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 79 
						

							Sound Control
English - 80
Choosing a Digital Sound Format
Digital sound can be output from the rear-panel connector on your TV. The digital sound
output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio
component, you must specify the transmission format (Dolby or PCM, as appropriate to your
digital audio component). See the owner’s manual of your Digital Audio component for further 
information.
1
Press the MENU button.
Press the …or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Digital Output”, then
press the ENTER button.
Press the …or †button to
select “Dolby Digital” or
“PCM”, then press the
ENTER button.
Press the EXIT button to exit.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Sound
Mode : Custom√Equalizer√SRS TSXT :  Off√Multi-Track Options√Auto Volume :  Off√Internal Mute : Off√Digital Output : Dolby Digital√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Sound
Mode : Custom
Equalizer
SRS TSXT :  Off
Multi-Track OptionsAuto Volume :  Off
Internal Mute : Off
Digital Output : PCM
▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Dolby DigitalPCM
Digital
BP68-00469A-02(074~083)  9/2/05  10:38 AM  Page 80