Samsung Hl-r5087w Dlp Tv Instruction Manual

English - 51
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV)
channels have either perfect reception quality or you will not receive them at all. So, unlike analog
channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or...

English - 52
Channel Control
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the 
…or †button to
select “Channel”, then press
the ENTER button.
2
Press the …or †button to
select “LNA”, then press the
ENTER button.
3
Press the …or †button to
select “On”, then press the
ENTER button.
Pressing the 
…or †button
will alternate between “On”
and...

Picture Control
3_BP68-00448A-01(32~53)  1/20/05  5:11 PM  Page 53 

English - 54
Picture Control
Picture Control
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
and “Tint” according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Customizing the Picture
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the …or †button to
select a particular item, then
press the ENTER button....

English - 55
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”)
that are preset at the factory. You can select “Standard” which automatically
recalls your personalized picture settings.
1
Press the MENU button. 
Press the 
…or †button to select
“Picture”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3
Press the ENTER button again to select
“Mode”.
Press the 
…or †button to select a
particular item, then press the ENTER...

English - 56
Picture Control
Selecting the Color Tone
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Color Tone”, then
press the ENTER button.
3
Press the …or †button to
select “Cool2”, “Cool1”,
“Normal”, “Warm1”, or
“Warm2”, then press the
ENTER button.
Press the EXIT button to exit.
NOTE
•Color tone is not available in the “Cinema” picture mode.
Picture
Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR :...

Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
English - 57
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
Press the 
…or †button to
select “Size”, then press the
ENTER button.
2
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the ASPECT button on the remote control repeatedly to select
one of the...

Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
English - 58
Picture Control
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Digital NR”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to...

English - 59
DNIeTM (Digital Natural Image engine) 
This feature brings you a more detailed image with 3D noise reduction and detail, contrast and
white enhancement.
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “DNIe”, then press the
ENTER button.
3
Press the …or †button to
select “Off”, “Demo” or
“On”, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the DNIe button on the remote...

Operation
Setting the My Color Control Mode
My Color Control allows users to adjust colors according to their preferences, by adjusting skin,
sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and
“Custom”) without affecting other colors on the screen.
Using the Easy Control Menu
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “My Color Control”,
then press the ENTER button.
3
Press...