Samsung Hl-r5087w Dlp Tv Instruction Manual

							• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws. 
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1
Unplug TV, then use a
screwdriver to remove the
screws.
2
Open the Lamp cover.
3
Remove the 2 press-pin
screws securing the Lamp.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
English - 11
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 11 
						

							English - 12
List of Features
Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
• Easy-to-operate remote control
• Easy-to-use on-screen menu system you can access from the front panel or remote control
• Automatic timer to turn the TV on and off at any time you choose
• Adjustable picture and sound settings and the ability to memorize your favorite settings
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture-in-Picture capability that let you watch two channels at once
• Widescreen TV with adjustable image size
• Life-like clear images provided by DNle technology
• My Color Control Mode for corresponding with your color style
• Color weakness Mode
• Digital Input (HDMI/DVI IN) jack
• Digital Audio Output (OPTICAL) jack
• AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from
this TV.
• CableCARD slot
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here. 
If any piece is missing or broken, call your dealer. 
Your New Wide TV
Remote Control
(BP59-00076A)/
AAA BatteriesInstruction Manual/
Safety Guide/
Quick Guide/
Anynet Manual/
Manual GuideAnynet CableWarranty Cards (2)/
Registration Card (1)
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 12 
						

							English - 13
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen menu system. To use
the more advanced features, you must use the remote control.
Press to switch between viewing TV programs and
signals from connected components. Auto timer on has been set.
(Timer indicator)
Press to change channels and to move between items
on the on-screen menu.
Press to activate (or change) a particular item. Press and hold the POWER button for a few seconds to
turn the TV on or off.Standby state.
(Standby indicator; Red)
Aim the remote control towards this spot on the TV. Press to lower or raise the volume and to select items
when using the on-screen menu.
Press to see the on-screen menu.
NOTE
•Touching the control panel using
your finger will cause Blue LEDs to
light for all buttons. You can then
locate the desired button and touch
it to operate.
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 13 
						

							Your New Wide TV
English - 14
Front Panel Information Window
Appears while the TV is turning off.
Check if the ventilation hole on the rear of the set
is blocked, because if the inner temperature is too
high, the power will shut off.
A cooling fan inside the set is not operating
normally.
The TV’s rear cover is not properly shut. Lamp or other component may be defective.
Please contact a certified technician.
NOTES
•It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•  The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
The Information window appears as illustrated above while the TV is
turning on. (Refer to the TV set’s display for animation details.) When
successfully turned on, an animated “Smile” figure appears and then
fades out slowly.
When these indicators appear, there is a
possible problem with the TV.
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 14 
						

							English - 15
Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and
two set of component video input jacks on the rear panel of your TV. For more information, please see
“Connections”.
ŒANTENNA terminalsTwo independent cables or antennas can be connected to these terminals. Use
“Cable IN” and “Air IN” terminals to receive a signal from VHF/UHF antennas or
your cable system. Use the “Cable OUT” terminal to send the signal being
received by the “Cable IN” terminal out to another component (such as a Cable
Set-Top Box). (Refer to page 20)
´Component1, 2 jacks (Y, PB, PR, L, R) Use these jacks to connect the component video/audio signals from a DVD
player or a set-top box. (Refer to page 26~27)
ˇVIDEO/AUDIO OUTPUT jacks  Sends video/audio signal from the TV to an external source, such as a VCR.
These jacks are available only in RF, Video and S-Video modes.  
¨ S-VIDEO INPUT jacksConnects an S-Video signal from an S-VHS VCR or DVD player.  
(Refer to page 25)
ˆVIDEO/AUDIO INPUT jacksConnect video/audio signals from external sources, such as VCR or DVD players.
(Refer to page 26)
ØDVI (Digital Visual Interface) AUDIO INPUT jacksConnect to the digital audio output jacks of a device with DVI output.
(Refer to page 27)
∏DIGITAL AUDIO OUT(OPTICAL) jackConnect to a Digital Audio Component. (Refer to page 29)
”Anynet Please refer to the Anynet Owner’s Instruction. 
’HDMI (High Definition Multimedia Interface)/ DVI
INPUT jack
Connect to the HDMI jack of a device with HDMI output.
Connect to the digital video output jack for device with DVI output.
(Refer to page 27~28)
˝CableCARDTM
Insert the CableCARD into the slot. (Refer to page 24)
ÔSERVICEThis jack is for software upgrades. 
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 15 
						

							Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always
point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD
player or Samsung Set-Top Box. See pages 38~39 for details. 
Your New Wide TV
English - 16
1. POWERTurns the TV on and off.
2. P.MODEAdjust the TV picture by selecting one of
the preset factory settings (or select your
personal, customized picture settings.)
3. ANTENNAPress to select “AIR” or “CABLE”.
4. CHANNEL NUMBER Press to directly tune to a particular
channel.
5. -Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
“54-3”, press “54”, then press “-” and
“3”.
6.  VOL +, VOL -Press to increase or decrease the volume.
7. MUTEPress to mute the TV sound.
8. ANYNETRuns the Anynet view functions and sets up
Anynet devices.
9. MENUDisplays the main on-screen menu.
10. CH.LISTDisplays the channel list.
11. FAV.CH (Favorite Channel)Press to switch between your favorite
channels.
12. MODESelects a target device to be controlled by
the Samsung remote control (i.e., TV, STB,
VCR, CABLE, or DVD).
13. PRE-CHTunes to the previous channel.
14. SOURCEPress to display all of the available video
sources (i.e., TV, Set-Top box, VCR, DVD,
DTV).
15. CH /Press to change channels. 
Moves from one set of screen information
to the next in TV Guide menu.
16. INFOPress to display information on the TV
screen.
17. EXITPress to exit the menu.
18.▲, ▼, œ, √, ENTERPress to select highlight up, down, left, or
right. While using the on-screen menus,
press the ENTER to activate (or change) a
particular item.
19. MTS (Multichannel
Television Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
20. PIP (Picture In Picture)Displays the available channels in
sequence. (These buttons change channels
in the PIP window only.)
21. STILLPress to pause the current screen.
22. ASPECTPress to change the screen size.
23. SRSActivates TruSurround.
24. DNIe (Digital Natural
Image engine)
Activates DNIe.
25. SETUsed during set up of this remote control,
so that it will work compatibly with other
devices (Set-Top box, VCR, Cable box, DVD,
etc.).
26. SLEEPPress to select a preset time interval for
automatic shut off.
27. PIP ControlsCH /; Press to display the available
channels in sequence. (These buttons
change channels in the PIP window only.)
28. CAPTIONControls the caption decoder.
29. VCR/DVD ControlsControls VCR or DVD functions: Rewind,
Stop, Play/Pause, Fast Forward.
30. RESETIf your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again. 
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 16 
						

							Installing Batteries in the Remote Control
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote
control for a long time, remove the batteries and store them in a cool dry place.
1
Slide the back cover all the way out
to open the battery compartment of
the remote control.
2
Install two AAA size batteries.
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
3
Slide the cover back into place.
English - 17
NOTE
•Do not mix battery types, I.e, alkaline and manganese.
1_BP68-00448A-01(02~17)  1/20/05  5:09 PM  Page 17 
						

							SAMSUNG
2_BP68-00448A-01(18~31)  1/20/05  5:10 PM  Page 18 
						

							Connections
2_BP68-00448A-01(18~31)  1/20/05  5:10 PM  Page 19 
						

							English - 20
Connections
Connecting VHF and UHF Antennas
If you do not have a cable system, you will need to connect an antenna to your TV.  
Antennas with 300-ohm Flat Twin Leads
If your antenna looks like this:                         it has 300-ohm flat twin leads.
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adapter into the “Air
IN” terminal on the rear
panel. 
Antennas with 75-ohm Round Leads
If your antenna looks like this:                          it is an antenna with 75-ohm round leads.
1
Plug the antenna lead into the
“Air IN” terminal on the rear
panel.
2_BP68-00448A-01(18~31)  1/20/05  5:10 PM  Page 20