Samsung HL-S5679W Dlp Tv Owners Instructions

Operation
BP68-00587A-00Eng(018~031)  4/28/06  7:44 PM  Page 31 

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the  (Power) button on the front panel.
Dynamic Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the
…/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can
also view the on-screen menu system and make...

English - 33
Navigating Menus by Using the Menu Map
Using the Menu Map of the main menu enables you to view all menus and select a function quickly. 
You can select any menu by using the menu map.
1
Press the MENU button.
The main menu will appear at the bottom of the screen.
2
Press the œor √button to select “Menu Map”, then press the
ENTER button. The menu map will appear.
3
Press the …or †button to select a menu, then press the
ENTER button. The selected menu will appear.
4
Press the …/†/œ/√/ENTER...

English - 34
Operation
Selecting a Menu Language
When you start using your television for the first time, you must select the language which will
be used for displaying menus and indications.
1
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“Language”, then press the ENTER
button.
3
Press the …or †button to select
“English”, “Español” or “Français”,
then press the ENTER button. 
Select “Return” by pressing the 
…or †...

English - 35
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH  and CH  buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (channel manager).
1
Press the MENU...

Operation
English - 36
4
Press the œor √button to select the Antenna connection,
then press the ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto program. 
By default, the cable TV system is set to “STD”.
If you want to select another type of cable system,
press the 
œor √button to select Analog or Digital “STD”,
“HRC” or “IRC”.
5
Press the ENTER button to start the auto program. 
The TV begins memorizing all available stations. 
Press the ENTER button at any time to...

English - 37
Changing Channels
Using the Channel Buttons
When you press the CH  or CH  button, the TV changes channels in sequence. 
You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.  
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal....

Operation
English - 38
Customizing Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR,
Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to
switch between these modes, and control whichever piece of equipment you choose.
NOTE
•The remote control might not be compatible with all DVD Players, VCRs, Cable boxes,
and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1
Turn off your VCR.
2...

English - 39
Setting Up the Remote to Operate Your Cable Box
1
Turn off your cable box.
2
Press the CABLE button on your TV’s remote control.
3
Press the SET button on your TVs remote control.
4
Using the number buttons on your remote control, enter three
digits of the cable box code listed on page 43 of this manual for
your brand of cable box. Make sure you enter three digits of the
code, even if the first digit is a “0”. 
(If more than one code is listed, try the first one.)
5
Press the POWER button on...

English - 40
Operation
Setting Up the Remote to Operate Your DVD
1
Turn off your DVD.
2
Press the DVD button on your TV’s remote control.
3
Press the SET button on your TVs remote control.
4
Using the number buttons on your remote control, enter three
digits of the DVD code listed on page 44 of this manual for your
brand of DVD. Make sure you enter three digits of the code, even
if the first digit is a “0”. (If more than one code is listed, try the
first one.)
5
Press the POWER button on the remote...