Samsung Hp-p5031 Plasma Display Owners Instructions
Have a look at the manual Samsung Hp-p5031 Plasma Display Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Owner’s Instructions HP-P5031 This device is a Class B digital apparatus. BN68-00714A-00_cover 2004.5.6 11:49 AM Page 3
2 Important Warranty Information Regarding Television Format Viewing User Instructions Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally,viewing other stationary images and text such as stock market reports, video game displays,station logos,web sites or computer graphics and patterns,should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle,but permanent burned-in ghost images in the PDP picture. To avoid this,vary the programming and images, and primarily display full screen moving images,not stationary patterns or dark bars. On PDP models that offer picture sizing features,use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use,as well as burned-in images, are not covered by your Samsung limited warranty. Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 44 of this manual to reduce the degree of brightness and contrast of this screen when displaying a still image. Cell Defect The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit. Altitude The PDP will not operate normally at altitudes above 6500 ft. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. BN68-00714A-00_002~25 2004.5.6 11:51 AM Page 2
3 General Information Your New Plasma Display Panel ......................6 Remote Control Buttons ..................................8 Wall Installation Instructions ..........................10 Connecting Speakers ..................................14 How to assemble the Stand-Base ..................16 Connections Connecting VHF and UHF Antennas ..............18 Connecting Cable TV ..................................19 Connecting a VCR ......................................21 Connecting a Camcorder ............................22 Connecting a DVD Player ............................23 Connecting a DTV Receiver ..........................24 Operation Turning the PDP On and Off ........................26 Plug & Play Feature ......................................28 Memorizing the Channels ............................31 Setting Up Your Remote Control ....................36 Viewing an External Signal Source ..............38 Picture Control Customizing the Picture ..............................42 Using Automatic Picture Settings ..................43 Selecting the Color Tone ..............................44 DNIe (Digital Natural Image engine) ............45 Changing the Screen Size ..........................46 Freezing the Picture ...................................48 Viewing the Picture-in-Picture .......................49 Selecting a Signal Source (Antenna or Cable) for PIP.....54 Setting the MCC(My Control Color) Mode .....56 Sound Control Customizing the Sound ................................62 Using Automatic Sound Settings ...................63 Choosing a Multi-Channel Sound (MTS)Soundtrack......64 Using the Auto Volume ................................65 Setting the TruSurround XT ............................66 Listening to the Sound of the Sub(PIP) Picture ..67 Selecting the Internal Mute ............................68 Channel Control Fine Tuning Channels ..................................70 LNA (Low Noise Amplifier) ..........................71 Connecting a PC and Operation Connecting a PC ........................................74 Adjusting the PC Screen ..............................78 Changing the Position of the Image................79 Picture Quality Adjustment ..........................80 Information ................................................83 Time Setting Setting the Clock ........................................86 Setting the Sleep Timer ................................87 Setting the Timers ........................................88 Function Description Selecting a Menu Language ........................92 Digital Noise Reduction ..............................93 Selecting the Film Mode ..............................94 Using the Color Weakness Enhancement Option..95 Setting the Melody Sound ............................96 Setting the Blue Screen ................................97 Viewing Closed Captions ............................98 Using the V-Chip..........................................99 Appendix Troubleshooting ........................................106 Care and Maintenance ..............................107 Specifications ............................................108 Table of Contents BN68-00714A-00_002~25 5/24/04 6:04 PM Page 3
PLASMA DISPLAY PANEL General Information Your New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 Wall Installation Instructions ..........................................................10 Connecting Speakers ....................................................................14 How to assemble the Stand-Base ....................................................16 BN68-00714A-00_002~25 2004.5.6 11:51 AM Page 5
Front Panel Your New Plasma Display Panel 6 SOURCE/ENTER button Press to display all of the available video sources (ie., TV, AV1, AV2, S-Video, Component1, Component2, PC, DVI). Press to confirm a selection. MENU button Displays the main on-screen menu and exit. VOL(+,-) button Press to increase or decrease the volume. Also used to select or adjust items on the on-screen menu. CH(,) button Press CH or CHto change Channels. Also used to move up or down in the On-screen menu. Press to turn the PDP on and off. Power Indicator - Power Off: Red - Power On: Off - Timer On : Green Remote Control Signal Receiver Aim the remote control towards this spot on the PDP. Checking Accessories Owner’s Instructions Once you have unpacked your PDP, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Remote Control (BN59-00377G)/ AAA Batteries (4301-000103) Power Cord (3903-000144)Antenna Cable (BN39--00333A)Speaker Cables (BN39-00530A) Ferrite Core 2EA (3301-001110) Sold Separately S-VIDEO Cable(AA39-40001E) PC Cable(AA39-00288A) DVI Cable(BN39-00072A)Component Cables (RCA)(AA39-00033A) PC Audio Cable(BH39-00120A) BN68-00714A-00_002~25 2004.5.6 11:52 AM Page 6
7 Rear Panel ŒDVI INPUT (DVI-D / L-AUDIO-R) Connect to the digital video and audio output jack of a device with DVI output. ´MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices. ˇPC INPUT (RGB IN / AUDIO) Connect to the video and audio output jack on your PC. ¨FOR SERVICE ONLY Connector for service only. ˆS-VIDEO (S-VIDEO / L-AUDIO-R) Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR. ØAV1, AV2 (VIDEO / L-AUDIO-R ) Video and audio inputs for external devices, such as a camcorder or VCR. ∏COMPONENT1, COMPONENT2 Video (Y/Pb/Pr) and audio (L-AUDIO-R) inputs for Component. ”ANT IN VHF/UHF (75Ω) 75ΩCoaxial connector for Antenna/Cable Network. ’EXT SPEAKER (8Ω) Connectors for external rear speakers. ˝POWER IN Connect the supplied power cord. BN68-00714A-00_002~25 2004.5.6 11:52 AM Page 7
Remote Control Buttons ŒPOWER buttonTurns the PDP on and off. ´ASPECT buttonPress to change the screen size. ˇNumber buttons ¨+100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” ˆMUTE buttonPress to mute the PDP sound. ØVOL (Volume) buttonsUse it to adjust volume. ∏SLEEP buttonPress to select a preset time interval for automatic shutoff. ”MENU buttonDisplays the main on-screen menu. ’ENTER buttonConfirms a selection. ˝PIP buttonActivates picture in picture. ÔSTILL buttonPress to pause the current screen. LCD DisplayWhen you press a button, ‘ ‘ appears along with selected mode (TV, VCR, CATV, DVD or STB) and the remotes battery charge status. ÒP.MODE buttonAdjust the PDP picture by selecting one of the preset factory settings (or select your personal, customized picture settings.) ÚMODE buttonSelects a target device to be controlled by the Samsung remote control (i.e., VCR, Cable, DVD players or Samsung STB). If you change modes, the new mode is momentarily displayed on LCD. ÆPRE-CH buttonTunes to the previous channel. ıSOURCE buttonPress to display all of the available video sources (TV, AV1, AV2 S-VIDEO, COMPONENT1, COMPONENT2, PC, DVI). ˜CH (Channel) buttonsUse it to switch channels. ¯INFO buttonPress to display information on the PDP screen. ˘EXIT button Press to exit the menu. ¿Up/Down Left/Right buttonsControl the cursor in the menu.8 Remote Control BN68-00714A-00_002~25 2004.5.6 11:52 AM Page 8
¸SRS TSXT button Selects Trusurround XT mode. ˛MTS buttonPress to choose stereo, mono or Separate Audio Pro- gram (SAP broadcast). ◊AUTO PROG. buttonThe TV automatically cycles through all of the avail- able channels and stores them in memory. ±ADD/DEL buttonPress to add or delete channels in the TV’s memory. ≠DNIe buttonActivates DNIe (Digital Natural Image engine). –CAPTION buttonControls the caption decoder. —SET buttonUsed during set up of this Samsung remote control, so that it will work compatibly with other devices (VCR, Cable Box, DVD) ÷PIP control buttonsSIZE : Press to make the PIP window Large, Small or Double. SWAP : Exchanges the video signal that is currently displayed on the main screen with the signal in the PIP window. CH ,:Displays the available channels in sequence. (These buttons change channels in the PIP window only). ®VCR, DVD control buttonsControls VCR tape or DVD disc functions: Stop, Rewind, Play/Pause, Fast Forward. ∑RESET button If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. 9 Installing the Batteries in Your Remote Control 1Slide the back cover to open the battery compartment of the remote control.3Slide the cover back into place.2Install two AAA size batter- ies. Make sure to match the “+” and “-” ends of the bat- teries with the diagram inside the compartment. Remote Control Operation Range. You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the PDP’s remote control receiver. BN68-00714A-00_002~25 2004.5.6 11:52 AM Page 9
Wall Installation Instructions This wall mount bracket installation guide is for the following models:HP-P5031 1 Do not install the PDP on any location other than a vertical wall. 2 To protect the performance of the PDP and prevent problems, avoid the following locations: • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not install near or around any heating apparatus. 3 Use only recommended parts and components. 10 Installation Notes Insulation Holder : 4 EASCREW!: 4 EASCREW@: 12 EA 1EA 2EALEFT :1EA RIGHT :1EA Parts (Wall attachment panel is sold separately. Check with your dealer) Wall Mount Bracket ASSY-HINGE Support Bars Screws BN68-00714A-00_002~25 2004.5.6 11:52 AM Page 10