Samsung Ht A100t User Manual

							1
ENg
●  CONNECTIONS
CONNECTINg AUDIO FrOM EXTErNAl COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
  
    
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 
player. 
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD   DIgITA l IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
.
~
Audio Cable(not supplied)
Audio OUT
02056S-HT-A100-XAC-ENG.indd   212008-03-18   �� 11:56:23 
						

							


connections

AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR. 
  
  Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
 
Be sure to match connector colors.
 
 
Press the 
AUX button on the remote control to select AUX 2 input. 
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD   DIgITA l IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
  
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR 
to this product.
OPTICAl : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
  
     
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital 
component.
Press the AUX button on the remote control to select  DIgITA l IN.
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD   DIgITA l IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
~
.
~
M`
1.
.
~
Audio Cable (not supplied)If the external analog component has only one Audio Out, connect either left or right.
Optical Cable(not supplied)
AUX2 :  rear Panel OPTICAl :  rear Panel
External Analog ComponentExternal Digital Component

02056S-HT-A100-XAC-ENG.indd   222008-03-18   �� 11:56:25 
						

							

ENg

●  CONNECTIONS

CONNECTINg THE FM ANTENNA
  
    
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
     
Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
  
This unit does not receive AM broadcasts. 
 
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise  and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and there is a danger of fire.)
1.
.
M`
~
~
FM Antenna
(supplied)

02056S-HT-A100-XAC-ENG.indd   232008-03-18   �� 11:56:29 
						

							
4

before using your home theater
The DVD Home Theater's remote can be used to control Samsung TVs.
Plug the main unit's power cord into the AC power supply.
Press the DVD rECEIVEr button to switch to DVD 
RECEIVER mode to operate the DVD Home Theater.
 
Press the FUNCTION button on the main unit or DVD button 
on the remote to enable DVD/CD playback.
Press the TV button to set the remote to TV mode.
Press the POWEr button to turn on your Samsung TV
 with this remote. 
Press the TV/VIDEO button to select VIDEO mode 
on your TV. 
1.
.
.
4.
.
.VIDEO

02056S-HT-A100-XAC-ENG.indd   242008-03-18   �� 11:56:30 
						

							

ENg

●  PlAYBACK
playback
DISC PlAYBACK
 B
 Load a disc vertically into the Disc Insert Hole.
Place a disc gently into the tray with the disc’s label facing 
up.
Close the compartment by pressing the PlAY () button.
Playback starts automatically.
To stop playback, press the STOP (@) button during 
playback.
 If pressed once, PrESS PlAY is displayed and the stop position will be stored in memory.    
If the PlAY () button or ENTEr button is pressed, playback resumes from the stop position. (This 
function works only with DVDs.)
 If pressed twice, STOP is displayed, and if the PlAY () button is pressed, playback starts from the 
beginning.
To temporarily pause playback, press the PAUSE () button during playback.
 To resume playback, press the PlAY () button again.
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
1.
~
.
~
~
~
~
M`
`

02056S-HT-A100-XAC-ENG.indd   252008-03-18   �� 11:56:32 
						

							


playback

MP3/WMA-CD PlAYBACK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
Load the MP3/WMA disc.
The MP3/WMA menu screen will appear and 
playback will start.
The appearance of the menu depends on the 
MP3/WMA disc.
 WMA-DRM fi les cannot be played.
In Stop mode, use the Cursor ,,, button 
to select the album, and then press the ENTEr button.
Use the Cursor , button to select the track.
To change the album, use the Cursor ,,, 
button to select another album in Stop mode, and then 
press the ENTEr button.
Press the STOP (@) button to stop playback.
Depending on the recording mode, some MP3/WMA-CDs may not play.
Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.
Press the Cursor ,,, button when it is in Stop mode and select a desired icon from the 
top part of the menu.
Music File Icon : To play music fi les only, select the  Icon.
Image File Icon : To view image fi les only, select the  Icon.
Movie File Icon : To view movie fi les only, select the  Icon.
All File Icon : To view movie fi les only, select the  Icon.
1.
~
~
~
.
~
.
4.
M`
`
~
To play a fi le icon in the screen,

02056S-HT-A100-XAC-ENG.indd   262008-03-18   �� 11:56:33 
						

							

ENg

●  PlAYBACK

JPEg FIlE PlAYBACK
Images captured with a digital camera or camcorder, or JPEG fi les on a PC can be stored on a CD and then can be 
played back with this Home Theater.
rotate/Flip Function G
Press the Cursor ,,, button during playback.
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG fi les 
and 2048 x 1536 (or 3.0 MPixel) for progressive image fi les. 
If a JPEG fi le is played when the HDMI output resolution is 720p/1080i/1080p, the mode is automatically 
switched to 480p.
M`
`
button: Rotate 90° Clockwisebutton: Rotate 90° Counterclockwise
button: Flip Vertically
button: Flip Horizontally
Original Image
ENTER SELECT

02056S-HT-A100-XAC-ENG.indd   272008-03-18   �� 11:56:35 
						

							


playback

DIVX PlAYBACK
The functions discussed on this page apply to DivX disc playback only.
Skip Forward/Back D
During playback, press the [,] button. 
Goes to the next fi le whenever you press the ] button, if there are over 2 fi les in the disc. 
Goes to the previous fi le whenever you press the 
[ button, if there are over 2 fi les in the disc.
Fast Playback D
During playback, press the (,) button.To play back the disc at a faster speed, press the ( or ) button during playback. 
Each time you press either button, the playback speed will change as follows: 
2x  4x  8x  32x  Normal.
5 Minutes Skip function D
During playback, press the Cursor , button.
Playback skips 5 minutes forward whenever you press the Cursor  button.
Playback skips 5 minutes back whenever you press the Cursor  button.
Audio Display D
Press the AUDIO button.
If there are multiple audio tracks on a disc, you can toggle between them.
Each time you press the button, your selection will toggle 
among AUDIO (1/N, 2/N ...) and .
 is displayed when there is one supported language in the disc.
Subtitle Display D
 Press the SUBTITlE button.
Each time you press the button, your selection will toggle 
between SUBTITlE (1/N, 2/N ...) and SUBTITlE OFF.
If the disc has only one subtitle fi le, it will be played automatically.
See number 2 (Caption Function) below for more details 
concerning Subtitle usage with DivX discs.
~
~
~
~
~
~
~
M`
~
~
~

02056S-HT-A100-XAC-ENG.indd   282008-03-18   �� 11:56:37 
						

							

ENg

●  PlAYBACK

If the Disc has more than One Subtitle File D
If the disc has more than one subtitle fi le, the default 
subtitle may not match the movie and you will have 
to select your subtitle language as follows:
In Stop mode, press the Cursor , button, select the 
desired subtitle () from the TV screen, and then 
press the ENTEr button.
When you select the desired DivX fi le from the TV 
screen, the movie will be played normally.
DivX(Digital internet video eXpress) 
DivX is a video fi le format developed by Microsoft and is based on MPEG4 compression technology. It provides audio and video data over the Internet in real-time. 
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio.
 Supported Formats
  This product only supports the following media formats.If both video and audio formats are not 
supported, the user may experience problems such as broken images or no sound.
Supported Video Formats
FormatAVIWMV
Supported VersionsDivX3.11~DivX5.1, XviDV1/V2/V3/V7
Supported Audio Formats
FormatMP3WMAAC3
Bit Rate80~384kbps56~128kbps128~384kbps
Sampling Frequency44.1khz44.1/48khz
Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 are not supported.When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.
 Caption Function
You must have some experience with video extraction and editing in order to use this feature properly.To use the caption function, save the caption fi le (*.smi) in the same fi le name as that of the DivX media fi le (*.avi) within the same folder. Example.   Root   Samsung_007CD1.aviSamsung_007CD1.smiUp to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the fi le name are allowed. 
1.
.
1.
~
~
.
~
~
~

02056S-HT-A100-XAC-ENG.indd   292008-03-18   �� 11:56:38 
						

							
0

playback

USINg THE PlAYBACK FUNCTION
Displaying Disc Information  BAGD
You can view disc playback information  on the TV screen.
Press the INFO button.
Depending on the disc, the disc information display may 
appear different.
Depending on the disc, you can also select DOLBY DIGITAL,  
or PRO LOGIC.
 appears on the TV screen! 
If this symbol appears on the TV screen when pressing 
a button, that operation is not possible with the disc 
currently being played.
DVD displayTITLE displayELAPSED TIME 
display
STEREO (L/R) 
display
DVDAUDIODVD-AUDIO 
display
CHAPTER 
display
REPEAT 
PLAYBACK display
DOLBY DIGITAL 
display
CD displayTRACK (FILE) 
display
AUDIO LANGUAGE 
displayANGLE display
GROUP 
displaySUBTITLE display
Checking the remaining Time  BA
Press the rEMAIN button.
For checking the total and remaining time of a title or 
chapter being played.
Each time the remain button is pressed
DVD-VIDEO TITlE ElAPSED ➞ TITlE rEMAIN ➞ CHAPTEr ElAPSED ➞ CHAPTEr rEMAIN
DVD-AUDIO grOUP ElAPSED ➞ grOUP rEMAIN ➞ TrACK ElAPSED ➞ TrACK rEMAIN
B TrACK ElAPSED ➞ TrACK rEMAIN ➞ TOTAl ElAPSED ➞ TOTAl rEMAIN
A TrACK rEMAIN ➞ TrACK ElAPSED
M`
`
~
Screen Display

02056S-HT-A100-XAC-ENG.indd   302008-03-18   �� 11:56:41