Samsung Ht Bd2 User Manual

							
ZOOM
To setup, follow steps 1 to 3 in Viewing a Picture on page 59.
Press the ENTER button.
Press the  YELLOW(C)  button.
  
Use the RED(A) and GREEN(B)  buttons to zoom in/out the 
image.
- To move the area -
Press the ▲▼\b ► buttons to the area you want to enlarge.
- To stop the Zoom -
Press the  YELLOW(C)  button.
GO TO PHOTO LIST
To setup, follow steps 1 to 3 in Viewing a Picture on page 59.
Press the ENTER button.
To go Photo List, press the  RETURN or STOP  button.
4.
5.
6.
4.
5.
ar90 b u90 \f  Zoom d Speed © Slide Show
03/07BEACH.JPGCDCD
ar90 b  u90 \f  Zoom d Speed © Slide Show
04/07KE.JPGCDCD
a  Zoom In b Zoom Out \f Zoom Off   m MOVE
x2
60
CDCD
..
KE.JPG
KE2.JPG
MBHONG.JPG
NEW_BEE.JPT
_____1_.JPG 194 KB
191 KB
30 KB
76 KB
17 KB
BEACH.JPG 27 KB
Music
Photo
Setup
   d
 Slide Show
10 Apr 2003
10 Apr 2003
20 Apr 2002
08 Jul 2004
18 Feb 2004 17 Feb 2004
127 KB
08 Feb 2003
176.JPG
H
T-BD2_NOGB.indd   60HT-BD2_NOGB.indd   602007-12-6   11:50:412007-12-6   11:50:41
 
						

							
 GB
sound mode
SFE(SOUND FIELD EFFECT) MODE
You can set the SFE best suited for the type of music you are listening \
to.Press the SFE MODE  button.
SFE MODE appears on the display panel.
 Each time the button is pressed, the selection changes as
 follows
HALL1  ➞ HALL2  ➞ JAZZ  ➞ CHURCH  ➞ ROCK  ➞ SFE OFF.
HALL : Provides a clear vocal as if listening in a concert hall.
JAZZ : Recommended setting for Jazz.
ROCK : Recommended setting for Rock.
CHURCH : Gives the feel of being in a grand church. 
SFE OFF : Select this for normal listening.
SFE mode is not available with 7.1CH encoded signals or HD audio sound.
NEO:6 MODE
Enables you to play back 2 channel or DTS 5.1 channel audio signals over\
 7.1speakers.
Press  NEO:6 MODE  button.
NEO:6 MODE appears on the display panel.
Each time the button is pressed, the selection changes as follows.
CINEMA  ➞ MUSIC  ➞ NEO:6 OFF.
This mode decodes 2 channel signals to a high precision digital 
matrix decoder.  CINEMA : CINEMA mode is optimized for movie playback.
MUSIC : MUSIC mode is optimized for music playback.
NEO:6 OFF : Select this for normal listening.
NEO:6 mode is not available with 7.1CH encoded discs or HD (High Defi\
 nition) audio.
PCM signal is available when it is at 32KHZ, 44.1KHZ, 48KHZ, 88.2KHZ or \
96KHZ.
This mode is available only with 2 channel or DTS 5.1 channel audio sour\
ces.
•
•
•
•
•
•
•
M
•
•
•
•
•
M


61
●
  SOUND MODE
HT-BD2_NOGB.indd   61HT-BD2_NOGB.indd   612007-12-6   11:50:472007-12-6   11:50:47
 
						

							
sound mode
DOLBY PRO LOGIC IIx MODE
You can select the desired Dolby Pro Logic IIx audio mode. 
Press the  PL IIx MODE button.
Each time the button is pressed, the mode changes as 
follows.
MUSIC   ➞ MOVIE   ➞ PRO LOGIC   ➞ MATRIX  ➞ VIRTUAL  ➞ 
GAME  ➞ DPL
 IIx OFF .
MUSIC :   When listening to music, you can experience sound effects as if you are \
listening to the 
actual performance.
MOVIE : Adds realism to the movie soundtrack.
PRO LOGIC :   You will experience a realistic multi-channel effect, as if using six sp\
eakers, while using 
just the front left and right speakers.
  MATRIX : You will hear 7.1 channel surround sound.
VIRTUAL :   Select to enjoy a 5.1-channel surround sound that gives the feeling of b\
eing in a baseball 
park or concert hall.
GAME : Enhances the excitement of the games sound.
DPL
 IIx OFF :  Select this to listen to sound from the front left and right speakers an\
d the subwoofer only.
   When selecting Pro Logic IIx mode, connect your external device to the A\
UDIO INPUT 
jacks (L and R) on the player. If you connect to only one of the input\
s (L or R), you cannot 
listen to surround sound.
This mode is available only with 2 channel or DTS 5.1 channel audio sour\
ces.
DOLBY PRO LOGIC IIx EFFECT
This function works only in Dolby Pro Logic MUSIC mode.
Press the
  PL IIx MODE button to select  MUSIC mode.
Press the 
  PL IIx  EFFECT  button.
Each time the button is pressed, the mode changes as 
follows.
Press the  \b ► buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
C- WIDTH : You can select between 0 and 7.
DIMENS : You can select between 0 and 6.
•
•
•
•
•
•
•
•
M

1.
2.
•
3. •
•
•
62
HT-BD2_NOGB.indd   62HT-BD2_NOGB.indd   622007-12-6   11:50:492007-12-6   11:50:49
 
						

							
 GB
LISTENING TO RADIO
Remote Control 
 Press the TUNER button to select the FM band.
Tune in to the desired station. Automatic Tuning 1  : When the SKIP (
) 
button is 
pressed, a preset broadcast station is selected.
Automatic Tuning 2  : Press and hold the 
TUNING/CH  (
) button to automatically search for 
active  broadcasting stations.
 
Manual Tuning  : Briefl y press the  TUNING/CH (
)  
button to increase or decrease the 
frequency incrementally.
Main Unit
Press the  FUNCTION  button to select the FM band.
Select a broadcast station. Automatic Tuning 1  : Press the STOP (
) button to select  PRESET and then 
press the  SKIP ()
 button to select the preset station. 
Automatic Tuning 2  : Press the  STOP  (
) button to select  MANUAL and then 
press and hold the  SKIP (
) button to automatically search the band.     
  
Manual Tuning  : Press the 
STOP (
) button to select 
MANUAL
 and then 
briefl y press the  SKIP () button to tune in to a lower or higher frequency.
Mono/Stereo
Press the  MO/ST button to listen in Mono/Stereo. 
Each time the button is pressed, the sound switches 
between   STEREO and MONO .
In a poor reception area, select  MONO for a clear, 
interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory 
 Press the TUNER button to select the FM band.
Press the  TUNING/CH  ()  button to select .
Press the  TUNER MEMORY  button. 
PRGM fl ashes in the display.
Press the SKIP () button to select preset number.  
You can select between 1 and 15 presets.
Press the  TUNER  MEMORY  button again.
Press the  TUNER MEMORY  button before PRGM disappears from the display.
PRGM  disappears from the display and the station is stored in memory.
To preset another station, repeat steps 2 to 5. 
To tune in to a preset station, press the  SKIP () button
 on the remote control to select a channel.
1.
2.
•
•
•
1.
2. •
•
•
•
•
1.
2.
3. •
4.
•
5. •
•
6. •
radio
63
●  RADIO
HT-BD2_NOGB.indd   63HT-BD2_NOGB.indd   632007-12-6   11:50:502007-12-6   11:50:50
 
						

							
64
SLEEP TIMER FUNCTION
You can set the time that the Blu-ray Home Cinema will shut itself off. 
Press the SLEEP button.
Each time the button is pressed, the preset time changes as follows 
: 
10 
➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF.
To confi rm the sleep timer setting, press the  SLEEP button.
The remaining time before the Blu-ray Home Cinema will shut itself 
off is displayed.
Pressing the button again changes the sleep time from what you 
have set earlier.
  
To cancel the sleep timer, press the  SLEEP button until  OFF appears on the display.
ADJUSTING DISPLAY BRIGHTNESS
You can adjust the brightness of the display on the main unit so it won\
t interfere with your movie viewing.
Press the  DIMMER button.
Each time the button is pressed, the brightness of front display will 
be adjusted.
MUTE FUNCTION
This is useful when answering a doorbell or telephone call.
Press the  MUTE button.
MUTE appears in the display.
To restore the sound, press the  MUTE button again.
•
•
•
•
•
•
convenient function
HT-BD2_NOGB.indd   64HT-BD2_NOGB.indd   642007-12-6   11:50:542007-12-6   11:50:54
 
						

							
65
 GB
●  TROUBLESHOOTING
troubleshooting
Refer to the chart below when this unit does not function properly. If t\
he problem you are experiencing is not listed 
below or if the instruction below does not help, turn off the unit, disc\
onnect the power cord, and contact the nearest 
authorized dealer or Samsung Electronics Service Center.
SYMPTOM Check/Remedy
I cannot eject the disc. • Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start. •  Check the region number of the BD/DVD.
BD/DVD discs purchased from abroad may not be playable.
•  CD-ROMs and DVD-ROMs cannot be played on this Blu-ray Home Cinema.
• Make sure that the rating level is correct.
Playback does not start 
immediately when the 
Play/Pause button is pressed. •  Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced. •  
No sound is heard during fast playback, slow playback, and step motion p\
layback.
•  Are the speakers connected properly? Is the speaker setup correctly cust\
omized?
•  Is the disc severely damaged?
Sound can be heard only from a few 
speakers and not all 8. •   When listening to a CD or radio, sound is output from the front speakers\
(L/R) only. To enjoy sound over 7 or 8 speakers select the D.PL IIX, N\
eo:6
or SFE MODE modes.
•  If you set SBL and SBR to NONE in the speaker mode in the audio setup of\
 the setup screen, no sound is heard from the SBL and SBR speakers.
 Set SBL and SBR to Small.
Dolby Digital 5.1 CH Surround Sound is 
not produced. • 
 Is there Dolby Digital 5.1 CH mark on the disc? Dolby Digital 5.1 CH S\
urround 
Sound is produced only if the disc is recorded with 5.1 channel sound.
•  Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the 
information display?
The remote control does not work. • 
 Is the remote control being operated within its operation range of angle\
 and distance?
• Are the batteries drained?
•  
Have you selected the mode(TV/BD) functions of the remote control (TV\
 or BD) correctly?

picture is produced.
 picture is shaking. • Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.•  Audio language and subtitles will not work if the disc does not contain \
them.
Menu screen does not appear even 
when the menu function is selected.
•  Are you using a disc that does not contain menus?
Aspect ratio cannot be changed. •  You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 
4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. 
Refer to the BD disc jacket and then select the appropriate function.
HT-BD2_NOGB.indd   65HT-BD2_NOGB.indd   652007-12-6   11:50:562007-12-6   11:50:56
 
						

							
66
SYMPTOM Check/Remedy
 (Example: The power goes out or 
strange noise is heard.)

  The Blu-ray Home Cinema is not working  normally.
•  Turn off the power and hold the STOP  () button on the main unit for 
longer than 5 seconds.
Using the RESET function will erase all stored settings. 
Do not use this unless necessary.
The password for rating level has been 
forgotten. •  While (NO DISC) message appears on the display of main unit, hold the 
main units 
STOP  () button for longer than 5 seconds.  INITIAL 
appears on the display and all settings will return to the default value\
s.
• Press the  POWER button.
Using the RESET function will erase all stored settings. 
Do not use this unless necessary.
Cant receive radio broadcasts. •  Is the antenna connected properly?
•  If the antennas input signal is weak, install an external FM antenna in\
 an 
area with good reception.
While listening to TV audio through the 
Blu-ray Home Cinema system, no sound 
is heard. • 
 If the EJECT button is pressed while listening to TV audio using the 
D.IN or AUX functions, the BD/DVD functions are turned on and this mutes\
 
the TV audio.
The   icon appears on screen.
•   The features or action cannot be completed at this time because:
1. The BD/DVD’s software restricts it.
2.  The BD/DVD’s software doesn’t support the feature (e.g., angles)\
3. The feature is not available at the moment.
4. 
 You’ve requested a title or chapter number or search time that is out\
 of range.
If the HDMI output is set to a resolution your 
TV cannot support (for example, 1080p), you 
may not see a picture on your TV.
•   Press the STOP  () button (in front panel) for more than 5 seconds with 
no disc inside. All settings will revert to the factory settings.
No HDMI output. •   Check the connection between the TV and the HDMI jack of the Blu-ray 
Home Cinema.
•   Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input  resolution.
Abnormal HDMI output screen. •   If random noise appears on the screen, it means that TV does not support\
 
HDCP (High-bandwidth Digital Content Protection).
troubleshooting
HT-BD2_NOGB.indd   66HT-BD2_NOGB.indd   662007-12-6   11:50:572007-12-6   11:50:57
 
						

							
67
 GB
●  APPENDIX
appendix
CAUTIONS ON HANDLING AND STORING DISCS
Small scratches on the disc may reduce sound and picture quality or caus\
e skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. 
Hold the disc by the edges so that fingerprints will not get on the surf\
ace.
Do not stick paper or tape on the disc.
Disc Storage
Do not keep in direct sunlight Keep in a cool 
ventilated area Keep in a clean Protection jacket.
Store vertically.
Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it with a mild dete\
rgent diluted in water and wipe with 
a soft cloth.
When cleaning, wipe gently from the inside to the outside of the disc
Condensation may form if warm air comes into contact with cold parts ins\
ide the player. 
When condensation forms inside the player, the player may not operate co\
rrectly. If this 
occurs, remove the disc and let the player stand for 1 or 2 hours with t\
he power on.
M

•
M
HT-BD2_NOGB.indd   67HT-BD2_NOGB.indd   672007-12-6   11:50:582007-12-6   11:50:58
 
						

							
68
appendix
SPECIFICATIONS
GeneralPower Consumption
110 W
Weight 6.1 kg
Dimensions 440(W) x 396(D) x 87(H) mm  
Operating Temperature Range +5°C~+35°C
Operating Humidity Range 10 % to 75 %
Disc BD (Blu-ray Disc) Reading Speed : 4.917m/sec
DVD (Digital Versatile Disc)
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
CD : 12 cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
CD : 8 cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Video Output Composite Video
1 channel : 1.0 Vp-p (75 
Ω load)
Blu-ray Disc : 576i/480i     DVD : 576i/480i
Component Video Y : 1.0 Vp-p (75 
Ω load)
Pr : 0.70 Vp-p (75  Ω load)
Pb : 0.70 Vp-p (75  Ω load)
Blu-ray Disc : 1080i, 720p, 576p/480p, 576i/480i 
DVD : 576p/480p, 576i/480i
Video/Audio HDMI 1080p, 1080i, 720p, 576p/480p
PCM multichannel audio, Bitstream audio, PCM audio
AmplifierFront speaker output
135W x 2(3
Ω)
Center speaker output 135W(3
Ω)
Surround speaker output 135W x 2(3
Ω)
Subwoofer speaker output 155W(8
Ω)
Surround Back speaker output135W x 2(3Ω)
Frequency range 20Hz~20KHz
S/N Ratio 70dB
Channel separation 60dB
Input sensitivity (AUX)400mV
Speaker
Speaker system7.1ch speaker system
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
*: Nominal specifi cation
- Samsung Electronics Co., Ltd reserves the right to change the specifi\
 cations without notice.
- Weight and dimensions are approximate.
Front/Surround, Center, Surround Back
3  Ω
140Hz~50KHz
88dB/W/M

135W
270W
Subwoofer
8
  Ω
35Hz~160Hz
90dB/W/M
155W
310W
Front/Surround : 125x 1310 x 81mm (Stand Base : Ø340mm)Center :  550 x 137 x 85mm
Surround Back : 100x 270 x 97mm
Subwoofer :  311 x  378 x  443mm 
Front/Surround : 6.3 kg, Center : 2.2 kg  
Surround Back : 1.3 kg, Subwoofer : 14.4 kg
H T-BD2_NOGB.indd   68HT-BD2_NOGB.indd   682007-12-12   18:02:592007-12-12   18:02:59
 
						

							
69
 GB
●  APPENDIX
COPY PROTECTION
Because AACS (Advanced Access Content 
System) is approved as content protection 
system for BD format, similar to use of CSS 
(Content Scramble System) for DVD format, 
certain restrictions are imposed on playback, 
analog signal output, etc., of AACS protected 
contents. The operation of this product and 
restrictions on this product may vary depending 
on your time of purchase as those restrictions 
may be adopted and/or changed by AACS after 
the production of this product. Furthermore, 
BDROM Mark and BD+ are additionally used as 
content protection system for BD format, which 
imposes certain restrictions including playback 
restrictions for BD-ROM Mark and/or BD+ 
protected contents. To obtain additional 
information on AACS, BD-ROM Mark, BD+, or 
this product, please contact SAMSUNG 
customer care center.
Many BD/DVD discs are encoded with copy 
protection. Because of this, you should only 
connect your Blu-ray Home Cinema directly to 
your TV, not to a VCR. Connecting to a VCR 
results in a distorted picture from copy-protected 
BD/DVD discs.
This product incorporates copyright protection 
technology that is protected by methods claims 
of certain U.S. patents and other intellectual 
property rights owned by Macrovision 
Corporation and other rights owners. Use of this 
copyright protection technology must be 
authorized by Macrovision Corporation and is 
intended for home and other limited viewing uses 
only, unless otherwise authorized by Macrovision 
Corporation. Reverse engineering or disassembly 
is prohibited.
Under the U.S. Copyright laws and Copyright 
laws of other countries, unauthorized recording, 
use, display, distribution, or revision of television 
programs, videotapes, BDs, DVDs, CDs and 
other materials may subject you to civil and/or 
criminal liability.
PROGRESSIVE SCAN OUTPUTS (525p/625p) 
CONSUMERS SHOULD NOTE THAT NOT ALL 
HIGH DEFINITION TELEVISION SETS ARE 
FULLY COMPATIBLE WITH THIS PRODUCT 
AND MAY CAUSE ARTIFACTS TO BE 
DISPLAYED IN THE PICTURE. IN CASE OF 525 
PROGRESSIVE SCAN PICTURE PROBLEMS, IT 
IS RECOMMENDED THAT THE USER SWITCH 
THE CONNECTION TO THE `STANDARD 
DEFINITION OUTPUT. IF THERE ARE 
QUESTIONS REGARDING OUR TV SET 
COMPATIBILITY WITH THIS MODEL 525p DVD 
PLAYER, PLEASE CONTACT OUR CUSTOMER 
SERVICE CENTER.•
•
•
•
•
Compliance and Compatibility Notice
NOT ALL discs are compatible
Subject to the restrictions described below and those 
noted throughout this Manual, including the Disc Type 
and Characteristics section of this Manual, disc types 
that can be played are: pre-recorded commercial 
BDROM, DVD-Video, and Audio CD discs; DVD-RW / 
DVDR discs; and CD-RW/CD-R discs.
Discs other than the above cannot and/or is not intended 
to be played by this player. And some of the above discs 
may not play due to one or more reasons provided 
below.
HD DVD discs cannot be played in this player.
Samsung cannot assure that this player will play every 
disc bearing the BD-ROM, DVD-Video, DVD-RW / DVDR 
and CD-RW / CD-R logos, and this player may not 
respond to all operating commands or operate all 
features of every disc. These and other disc compatibility 
and player operation issues with new and existing format 
discs are possible because:
- BD format is a new and evolving format and this player  
  may not operate all features of BD discs because some  
  features may be optional, additional features may have  
  been added to the BD format after the production of  
  this player, and certain available features may be  
  subject to delayed availability;
- not all new and existing disc format versions are  
  supported by this player;
- new and existing disc formats may be revised,  
  changed, updated, improved and/or supplemented;
- 
some discs are produced in a manner that allows  
  specifi  c or limited operation and feature during playback;
- some features may be optional, additional features may  
  have been added after the production of this player or  
  certain available features may be subject to delayed  
 availability;
- some discs bearing the BD-ROM, DVD-Video, DVD  
  RW/ DVD-R and CD-RW/ CD-R logos may still be  
 nonstandardized discs;
- some discs may not be played depending on their  
  physical state or recording conditions;
- 
problems and error can occur during the creation of  
  BD, DVD and CD software and/or the manufacture of  
 discs;
- this player operates differently than a standard DVD  
  player or other AV equipment; and/or
- for reasons noted throughout this Manual and for other  
  reason(s) discovered and posted by SAMSUNG  
  customer care center.
If you encounter disc compatibility or player operation 
problems, please contact SAMSUNG customer care 
center. You may also contact SAMSUNG customer care 
center for possible updates on this player.
For additional information on playback restrictions and 
disc compatibility, refer to the Precautions, Before 
Reading the User’s Manual, Disc Types and 
Characteristics, and Before Playing sections of this 
Manual.
•
•
•
•
•
•
H T-BD2_NOGB.indd   69HT-BD2_NOGB.indd   692007-12-6   11:51:002007-12-6   11:51:00