Samsung Ht C455 User Manual

							
0 English
English 1

02
Connections

Connecting Audio from external Components
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue component. 
Be sure to match the colours of the connecting jacks.
Press the FUNCTION button to select AUX input. 
The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
   NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the external digital component.
Press the FUNCTION button to select D.IN.
The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
1.
~
2.
~
✎
`
1.
2.
~
DIGITALAUDIO INOPTICALHDMI OUT
AUX INCOMPONENTOUT
VIDEOOUTFM ANT.
HDMI OUT
COMPONENTOUT
VIDEOOUTFM ANT.
Optical Cable
(not supplied)
Audio Cable (not supplied)
If the external analogue 
component has only one Audio 
Out, connect either left or right.
Set-Top BoxVCR
AUXOPTICAL
White
Red
 
						

							
 English

Setup

English 

Before Starting (Initial Setting)
Press the POWER button when it is plugged in TV for the fi rst time.Initial Setting screen will be displayed.
Move   Select              Return
Initial setting > On-Screen LanguageSelect a language for the on-screen displays.
EnglishKoreanDutchFrenchGermanItalian
Press the ▲▼ buttons to select the desired language, then press the ENTER button.
Press the ENTER button to select Start button.
Press the ▲▼ buttons to select desired TV Aspect, then press the ENTER button.
Press the ENTER button to select Start button. 
 NOTE
If the HDMI cable is connected to the product, TV aspect does not appear.If you want to move to the previous screen, press the RETURN button.Once you select a menu language, you can change it by pressing the STOP (@) button on the remote control for more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to 
the Initial Setting. (see page 26)
Selecting the Video Format
Each country has a different video format standard. You can select the video format either NTSC or PAL. Press and hold the Number 7 button on the remote control for over 5 seconds while the product is urned off.
"NTSC" or "PAL" will appear on the display. At this time, press the Number 7 button to select either "NTSC" or "PAL".
The video format of the disc must be the same as he video format of your TV.
1.
2.
3.
4.
5.
✎
`
`
`
`
~
~
Setting the Setup menu
The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the fi rmware version.
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
DISC MENUMENUTITLE MENU
TOOLSINFO
ABCDTUNER MEMORYMO/STCD RIPPING
1
2
3
4
1MENU BUTTON : Display the home menu.
2RETURN BUTTON : Return to the previous setup menu.
3
ENTER / DIRECTION BUTTONMove the cursor and select an item.Select the currently selected item.Confi rm the setting.
4EXIT BUTTON : Exit the setup menu.
Function    DVD/CD      
Settings
Press the POWER button.
Press the _+ buttons to select Settings, then press the ENTER button.
Press the $% buttons to select the desired menu, then press the ENTER button.
Press the $% buttons to select the desired sub-menu, then press the ENTER button.
Press the $% buttons to select the desired item, then press the ENTER button.
Press the EXIT button to exit the setup menu.
1.
2.
3.
4.
5.
6.
 
						

							
 English
English 

03
Setup

Display
You can configure various display options such as the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting.
4:3 Pan-Scan~
Select when you want to see the 16:9 video supplied by the DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off).
4:3 Letter Box~
Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
16:9 Wide~
You can view the full 16:9 picture on your widescreen TV.
NOTE
When using HDMI, the screen is automatically converted to the 16:9 Wide mode and TV Aspect is deactivated.If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting.
BD Wise 
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically.  
✎
`
``
On : The original resolution of the DVD disc will 
be output to the TV direct.
Off : The output resolution will be fixed 
according to the Resolution previously set, 
regardless of the resolution of the disc. 
NOTE
This will optimize the picture quality according to the content (In the DVD disc, etc) that you want to play and the product or your BD Wise-compliant Samsung TV.If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance.BD Wise will be disabled if the product is connected to a device that does not support BD Wise.
Resolution 
Sets the output resolution of the HDMI video signal. The number in 480p(576p), 720p, 1080i and 1080p indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively.
BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.)480p(576p) : Outputs 480 lines of progressive video.720p : Outputs 720 lines of progressive video.1080i : Outputs 1080 lines of interlaced video.1080p : Outputs 1080 lines of progressive video.
NOTE
If Component or Composite is connected, the resolution supports only 480i(576i).1080P may not appear depending on TV.
HDMI Format
You can optimize the colour setting from the HDMI output. Select a connected device Type.
TV : Select if connected to a TV via HDMI.Monitor : Select if connected to a Monitor via HDMI.
~
~
✎
`
`
`
~
~~~~
✎
`
`
~~
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English

Setup

English 

Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Rear Speakers, as well as Test Tone in this mode.
Settings
Move   Select              Return
Speaker Setting
Speaker Size ▶Sound EditDelay Time
Test Tone
  :   OFF
 Select 
  Return
For the Front speakers, the mode is set to Small.
For the Subwoofer, the mode is set to Present.
For the Centre and Rear speakers, you can switch the mode to Small or None.
- Small :    Select this when using the speakers.
- None :    Select this when no speaker is connected.
NOTE
The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Move   Select              Return
Sound Edit 
Change   Select              Return
dBdB
dBdBdB
dB  LdB  LFront  Bal.Rear  Bal.
Center  LevelRear  LevelSW  Level
Press the $% buttons to select and adjust the desired speaker. 
Press the _+ buttons to adjust the settings.
~
~
~
✎
`
Adjusting Front/Rear Speaker Balance
You can select between 0 and -6.The volume decreases as you move closer to –6. 
Adjusting Centre/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Centre and  Rear speakers. You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.  Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a 
delay effect to the Center and Rear Speakers.
Settings
Move   Select              Return
Delay Time
Front
Center 
  :   00mSEC
Rear
  :   10mSEC
Subwoofer         
Test Tone  :   OFF
Change   Select              Return
NOTE
The Delay Time menu will be activated only when a 5.1 channel source is played.
You can not set Centre and Rear in this mode when their Speaker Size is set to None. 
``
`
`
✎
`
`
RR
 
						

							
 English
English 

03
Setup

Ideal Centre Speaker placement
Df: The distance from Front SpeakerDc: The distance from Centre SpeakerDr: The distance from Rear Speaker
Place all speakers within this circle.
Ideal Rear  Speaker placement
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the  distance of Df in the figure, set the mode as 0ms.  Otherwise, change the setting according to the table.
Distance between  Df and Dc 0.00m0.34m0.68m1.06m1.40m1.76m
Delay Time00 ms01 ms02 ms03 ms04 ms05 ms
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms.  Otherwise, change the setting according to the table.
Distance between Dr and Dc 0.00m1.06m2.11m3.16m3.62m5.29m
Delay Time00 ms03 ms06 ms09 ms12 ms15 ms
NOTE
With  PL II (Dolby Pro Logic II), the delay time may be different for each mode.With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.The Centre channel is only adjustable on 5.1 channel discs.
✎
`
`
`
Test Tone
Settings
Move   Select              Return
Speaker Setting
Speaker SizeSound EditDelay TimeTest Tone  :   On ▶
 Select   Return
Use the Test Tone feature to check the speaker 
connections.
Press the _+ buttons to select ON.
The test tone will be sent to Front Left ➞ Center 
➞ Front Right ➞ Rear Right ➞ Rear Left ➞ Subwoofer in order.   To stop the test tone, press the ENTER button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
You can select either off, 2/8, 4/8, 6/8, Full
AV-SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time tomatch the video
You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled On/Off.
On :   
Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
Off :   
Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
~
~
~
~
~
~
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English

Setup
English 
NOTE
The default setting of this function is HDMI Audio Off.HDMI Audio is automatically down-mixed to 2ch for TV speakers.When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work.
EQ Optimizer
Set optimal EQ automatically depending on the region.
Off:   Turn EQ Optimizer off.
On:  Turn EQ Optimizer on.
System
Initial Setting
By using the Initial Setting, you can set the language and TV aspect. 
NOTE
If an HDMI cable is connected to the product, the TV aspect does not appear and it is set to 16:9 Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
Language
You can select the language you prefer for on-screen menu, disc menu, etc. 
OSD LanguageSelect the language for the on-screen displays.
Disc MenuSelect the language for the disc menu displays.
AudioSelect the language for disc audio.
SubtitleSelect the language for disc subtitles.
a  To select a language that does not appear in the menu, select OTHERS in the Disc Menu, Audio and Subtitle, and enter the country code. (see page 37).
a  You cannot select OTHERS in the OSD Language menu. 
✎
``
`
~
~
✎
`
NOTE
The selected language will only appear if it is supported on the disc.
Security
The Parental Lock function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set. A larger number indicates that the program is intended for adult use only. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.Enter the password and then press the ENTER button.- The password is set to "7890" by default.
- 
 Once the setup is complete, you will be taken to the previous screen.
Change Password
Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control.
Settings
Move    Select              Return
Perental   : OffPassword   : Change   ▶DisplayAudioSystemLaguageSecuritySupport
If you forgot your password
Remove the disc.
Press and hold the STOP (@) button on the remote control for 5 seconds or more. All settings will revert to the factory settings.
Support
Product Information
Product information such as Model code, Software Version, etc. is provided.
✎
`
1.
2.
 
						

							
 English
English 

04
Basic Functions
Disc Playback
 Press the OPEN/CLOSE (^) button.
Place a disc gently into the tray with the disc's label facing up.
Press the OPEN/CLOSE (^) button to close the disc tray.
NOTE
Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with DVDs.) Press the STOP button twice during playback to disable the Resume function.
If no buttons are pressed on the product or remote control for more than 3 minutes when the product is in Pause mode, it will change to STOP mode.
The initial screen may appear different, depending on the content of the disc.
Pirated discs will not play in this product because they violate the CSS(Content Scrambling System: a copy protection system) recommendations.
※   will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
If the product is left in the stop mode for more than 5 minutes without being used, a screen saver will appear on your TV.
If the product is left in the screen saver mode for more than 25 minutes, the power will automatically turn off (Automatic Power-Off Function).
    
1.
2.
3.
✎
`
`
`
`
~
~
Basic Functions
Audio CD(CD-DA)/m P3/W m A Playback
BA
Track011/17
0:15  /  3:59
Function   DVD/CD                            Repeat   Play Mode
Insert an Audio CD(CD-DA) or an MP3 Disc into the disc tray.
For an Audio CD, the first track will be played automatically. 
- 
 
Press the [] buttons to move to the previous/next track.
For the MP3/WMA disc, press the _+ buttons to select Music, then press the ENTER button.
- 
 
Press the 
$%_+ buttons to select  a desired file and press the ENTER button. 
- 
 
Press the () buttons to move to the previous/next pages.
Press the STOP (@) button to stop playback.
NOTE
Some MP3/WMA-CDs may not play, depending on the recording mode.Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
1.
~
~
2.
✎
`
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English

Basic Functions

English 

JPe G  f ile Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this product.
Insert a JPEG disc on the disc tray.
Press the _+ buttons to select Photo, and then press the ENTER button.
Press the $% buttons to select the folder you want to play, and then press the ENTER button.
Press the ▲▼ buttons to select the photo you want to play, and then press the ENTER button.
The selected file will play and slide show will start.To stop slide show, press the PAUSE (#) button.You can view the previous/next file by pressing the ◄,► buttons during the slideshow mode.
2010/01/01
JPEG 1JPEG 2JPEG 3
Function   DVD/CD                            Pages     Return
642 X 352
../ PICTURES
Rotate Function    
G
Press the GREEN(B) or YELLOW(C) button during the PAUSE mode.
GREEN(B) Button: Rotate 90° counterclockwise.
YELLOW(C) Button: Rotate 90° clockwise.
NOTE
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. 
1.
2.
3.
4.
~
~
~
~
~
✎
`
using the Playback  f unction
Forward/Reverse Search
BDA
Press the () buttons for Search Function.
    ( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
    ) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
NOTE
No sound is heard during search mode.  
Skipping Scenes/Songs
BAD
Press the [] buttons.
Each time the button is pressed during playback, the previous or next chapter, track or directory (file) will be played.
You cannot skip chapters consecutively.
Slow Motion Play         
D
Press the PAUSE (#) button and then ) button for Slow Motion play.
*1 ➞*2 ➞*3
D*1 ➞*2 ➞*3
NOTE
No sound is heard during slow playback.
Reverse slow playback does not work.
✎
`
~
~
✎
`
`
DownloadedFromTheatreSystem-Manual.comManuals 
						

							
 English
English 

04
Basic Functions

Step Motion Play   
D
Press the PAUSE button repeatly.
The picture moves forward one frame each time the button is pressed during playback.
NOTE
No sound is heard during step motion playback.
5 Minute Skip function    D
During playback, press the _,+ button.
Playback skips 5 minutes forward whenever you press the + button.
Playback skips 5 minutes backward whenever you press the _ button.
NOTE
You can operate this function only on the DivX.
Using the Disc Menu  
You can view the menus for the audio language, subtitle language, profile, etc. 
During playback, press the DISC MENU button on the remote control.
Press the $%_+ buttons to make the desired selection, then press the ENTER button.
NOTE
Depending on the disc, menu setup items may vary and this menu may not be available.  
 
 
~
✎
`
~
~
✎
`
1.
2.
✎
`
Using the Title Menu  
For DVDs containing multiple titles, you can view the title of each movie. 
 During playback, press the TITLE MENU button on the remote control.
Press the $%_+ buttons to make the desired selection, then press the ENTER button.
NOTE
Depending on the disc, menu setup items may vary and this menu may not be available.
1.
2.
✎
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9
 
						

							
0 English

Basic Functions

English 1

Repeat Playback
BAD
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B Repeat) of the DVD/DivX.
Repeat    OFF  
During DVD/DivX playback, press the REPEAT button on the remote control.
Press the $% buttons to select a desired repeat mode, then press the ENTER button.
Press the ▲▼ buttons to select OFF to return to normal play, then press the ENTER button.
ZTitle ➞ Chapter ➞ A - ➞ Off
DTrack ➞ Dir (Directory) ➞ Disc ➞ Off
CD/MP3 Repeat
During the CD/ MP3 playback, press the REPEAT button repeatedly to select the repeat mode you want.
B
  ;  ;  ; ; 
(Normal ; Repeat Track ; Repeat All ; Random ; Repeat Section A-B)
A
;  ;  ; ; 
(Normal  ; Repeat Track; Repeat Dir ; Repeat All; Random)
1.
2.
3.
1.
A-B Repeat Playback
B
You can repeatedly play back a designated section of a DVD or CD.
During the DVD disc or CD playback, press the REPEAT button on the remote control.
For DVD, press the $% buttons to select A-.For CD press the REPEAT button repeatedly 
until appears.
Press the ENTER button at the point where you want repeat play to start (A).
Press the ENTER button at the point where you want repeat play to stop (B).
To return to normal playback,For DVD, press the $% buttons to select to OFF. For CD, press the REPEAT button to select to .
NOTE
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
1.
2.
3.
4.
5.
✎
`
FUNCTIONTV SOURCEPOWER
DVD RECEIVER/TVSLEEP
DISC MENUMENUTITLE MENU
MUTE
REPEATVOLTUNING/CH
TOOLS
RETURNEXIT
INFO
ABCDTUNER MEMORY
DIMMERS . VOLAUDIO UPSCALEP .BASS
MO/STCD RIPPING
DSP /EQ
123
456
78
0
9