Samsung Ht D355k User Manual

10 EnglishEnglish 11
02 Connections
This section involves various methods of connecting the product to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Front Speakers ei
Place these speakers in front of your listening position, facing inwards (about 45°) 
toward you. Place the speakers so that their tweeters will be at the same height 
as your ear. Align the front face of the front speakers with the...

1 English
Connections
English 1
Speaker Components
SPEAKERCABLEFRONT
(L)(R)SUBWOOFER
SURROUND
(L)(R)CENTER
Speaker ComponentsAssembled Speakers
HT-D350K
HT-D355K

FRONT
SURROUND
(L) (R)STAND
STANDBASE
(L) (R)
SCREW (5×15): 4EA
SCREW (4×20): 16EA
SUBWOOFER
Center SPEAKER
FRONT/SURROUND  SPEAKER
SUBWOOFER
CENTER
HT-D355K
SPEAKERCABLE
HT-D353HK

HT-D353HK
SPEAKER
CABLESURROUND
(L) (R)
Stand Nut: 2EA
STANDBASEFRONT
(L) (R)
SUBWOOFER
CENTER
SUBWOOFER
FRONT SPEAKER
SURROUND...

1 EnglishEnglish 1
02 Connections
Installing the Speakers on the Tallboy Stand
* HT-D355K only - Front/Surround SpeakersTurn the Stand Base upside-down and connect it to 
the Stand.
Insert small screws (4*20, For connecting Stand & Stand 
Base) clockwise into the four holes marked using a 
screwdriver as shown in the illustration. 
 CAUTION : When you use a torque screwdriver, be 
careful not to put excessive force. Otherwise, it runs 
idle or can be damaged. (torque screwdriver- below 15...

1 English
Connections
English 1
Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire into the red 
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the 
Colors of the speaker plugs to the speaker jacks.
1.
2.
3.
BlackRed
Connecting the wall mount
Connect the speaker cord with the color tube 
to (+), and the speaker cord without the color 
tube...

1 EnglishEnglish 1
02 Connections
Connecting the video Out to your Tv
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect an HDMI cable (supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack 
on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) 
from the  COMPONENT OUT  (P
R, PB and Y) jacks on the back of the product to the Component Video Input...

1 English
Connections
English 1
HDMI FUNCTION
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single 
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture 
on a TV having an HDMI input jack.
HDMI...

1 EnglishEnglish 1
02 Connections
Connecting the fm Antenna
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a 
wall or other rigid surface.
NOTE
  This product does not receive AM broadcasts.
Connecting microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home. 
Watch the video and sing along the lyrics displayed on the TV screen 
against the accompaniment....

1 English
Connections
English 1
Connecting Audio from External Components
SURROUNDSURROUND
SUBWOOFER CENTER FRONT
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUTAUX IN
COMPONENT OUT
HDMI OUT
DIGITAL
AUDIO IN
ONLY
FOR SERVICESURROUNDSURROUNDSUBWOOFER
CENTERFRONTFRONTSPEAKERS OUT
SPEAKER IMPEDANCE : 3
FM ANT
VIDEO OUTAUX IN
COMPONENT OUT
HDMI OUT
ONLYFOR SERVICE
Optical Cable
(not supplied)
Audio Cable (not supplied)
If the external Analog component 
has only one Audio Out, connect...

1 EnglishEnglish 1
03 Setup
Before Starting (Initial Setting)
Press the POWER button when it is plugged in 
TV for the fi rst time.
Initial Setting screen will be displayed.
Move   Select              Return
Initial settings I On-Screen Language
Select a language for the on-screen displays.
English
à´	¯
Nederlands FrançaisDeutsch Italiano
Press the ▲▼ buttons to select the desired 
language, then press the  ENTER button.
Press the  ENTER button to select Start button.
Press the ▲▼ buttons to...

0 English
Setup
English 1
Display
You can configure various display options such as 
the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you 
may want to adjust the screen setting.
4:3 Pan-Scan~
Select when you want to see the 16:9 
video supplied by the DVD without the 
black bars on top and bottom, even 
though you have a TV with a 4:3 ratio 
screen(extreme left and right portion of 
the movie picture will be cut off).
4:3 Letter Box~
Select when you want...