Samsung Ht Z210 Quick Start Guide

							
AUX IN 2

DVD RECEIVER DVD
REMAIN
STEPPAUSE
PORT
AUDIO
P.BASS
SUBTITLE

quick start guide
1 disc playback
 Press the OPEN/CLOSE () button to open the disc tray.
Load a disc.
Place a disc gently into the tray with the disc’s label facing up.
Close the compartment by pressing the OPEN/CLOSE () 
button again.
Playback starts automatically.
1.
2.
•
3.
•
1 disc playback
2 remote control functions
3 connecting the speakers
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
1  - English
2 remote control functions
19PORT buttonUSB port selection
20 OPEN/CLOSE button
21TV/VIDEO buttonPress TV/VIDEO button to select the Videoinput on your TV.
22CANCEL buttonUsed to cancel a wrong entry.
23PAUSE button
Press to pause.
24
PLAY button
       Press to play.
STOP button
       Press to stop.
SEARCH buttons
                Fast backward or forward through a song/scene.
25TUNING/CH buttonPress to select the channel or to tune inradio broadcasting.
26MUTE buttonPress to mute the sound.
27RETURN buttonPress to return to the previous menu.
28Cursor/ENTER buttonUsed to select or move up/down, left/right when setting the menu function.
29SUBTITLE buttonSelects the disc subtitle language.
30EXIT buttonPress to exit the setup screen.
31INFO buttonView or change disc playback informationon screen.
32SOUND EDIT buttonAdjust the speaker sound settings andlevel.
33REPEAT buttonRepeat playback of a chapter, title, group or track.
34DSP/EQ buttonDigital Signal Processor/Equalizer func-tions in STEREO mode.
35LOGO buttonYou can make your own TV wallpaper (screen saver).
36DIMMER buttonThe front display brightness will beadjusted.
1DVD RECEIVER buttonYou can operate your DVD receiver with the remote control.
2TV button You can operate your Samsung TV with the remote control.
3POWER buttonPress to turn the Home Theater or your Samsung TV On/Off.
4Number (0~9) buttons
5REMAIN buttonYou can check the elapsed or remaining time on a disc.
6
STEP buttonThe picture moves forward one frame each time the button is pressed during playback.
7Tuning Preset/CD Skip buttonsTune in radio broadcasting, skip thesong/scene.
8VOLUME buttonPress + to raise the volume and – to lower it.
9MENU buttonPress to see the menu.
10AUDIO buttonSelects the Disc’s Audio language.
11 PL II MODE buttonAllows you to select six different Dolby Pro Logic II audio modes.
12TUNER MEMORY, SD/HD buttonPress to memorize radio frequencies.Press to select SD or HD mode.
13ZOOM buttonEnlarges the picture during disc playback.
14P.BASS buttonProvides more powerful bass.
15SLEEP buttonPress to set the sleep off time.
16
SLOW buttonSelects three different slow motionplayback speeds.
MO/ST buttonYou can listen to radio broadcasts inMONO or STEREO.
17 PL II EFFECT buttonAdjusts the Dolby Pro Logic II audio effect.
18
  DVD button
  Press to select the DVD mode.
  TUNER button
  Press to listen to radio broadcasting.
  AUX button
  Press to select external audio input.
2  - English
3 connecting the speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal,
  and then release the tab.
  Connect the connecting plugs to the back of the Home Theater.
Make sure the colors of the speaker terminals match the colors of the connecting 
plugs.
1.
2.
3.
•
  If you place a speaker near your TV set, screen color may be distorted because of the magnetic  eld generated by 
the speaker. If this occurs, place the speaker away from your TV set.
M
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
  Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien 
substances into the duct (hole) of the subwoofer speaker.
  Do not hang the subwoofer on a wall through the duct (hole).




RedBlack
3  - English
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
36
5.1CH Digital
Home Theater System
HT-Z210
Center Speaker
Front Speaker (L)
Rear Speaker (L)Rear Speaker (R)
Subwoofer
Front Speaker (L)
Thank you for purchasing this Samsung 5.1CH Digital Home Theater System.\
 
We have manufactured this product to provide you with many hours of Audi\
o/Video 
Entertainment. This “QUICK START GUIDE” guide has been included to\
 get
you up and running in the least amount of time as possible.
If you have any questions or comments relating to Samsung products, plea\
se contact 
the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com/us
Code No. AH68-02070U (0.0)
 
						

							
4 connecting the video out to your tv
AUX IN 2
AUX IN 2
METHOD3(supplied)METHOD2METHOD1
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the Component Video 
Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input Connectors on your TV.
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV. 
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
This product operates in Interlace scan mode (480i) for Component Output.
After making the video connection, set the Video input source on your TV to match the corresponding Video 
output (HDMI, Component or Composite) on your Home theater. 
See your TV owners manual for more information on how to select the TVs Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater using 
the TVs remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)
Please check the logo (If your TV has an logo, then it supports Anynet+ function.)
M




Choose one of the three methods for connecting to a TV.
4  - English
5 connecting audio from external components
5  - English
6 listening to radio
Listening to Radio
Remote Control 
Press the TUNER button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
Manual Tuning : Brie y press the ,,. button to increase or decrease the frequency incrementally.
Main Unit
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the 
preset station. 
Automatic Tuning 2 : Press the STOP (¦) button to select MANUAL and then press and hold  the #,$ button to 
automatically search the band.
Manual Tuning : Press the STOP (¦) button to select MANUAL and then brie y press the button to tune in to 
a lower or higher frequency.
1.
2.
•
•
•
1.
2.
•
•
•
Connecting the FM Antenna
     Connect the FM antenna supplied to the FM 75 COAXIAL Jack.
    Slowly move the antenna wire around until you  nd a location where reception is good, then fasten it to a wall or other rigid 
surface.
  This unit does not receive AM broadcasts.
1.
2.
M
6  - English
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
  Connect AUX IN 2 (Audio) on the Home Theater
  to the Audio Out of the external analog
  component.
  Be sure to match connector colors.
  Press the AUX button on the remote control to
  select AUX 2 input. 
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2 USB  FM.
    You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR 
to this product.
1.
•
2.
•
M
AUX IN 2AUX IN 2
AUX IN 2
Audio Cable (not supplied)If the external analog component has only one Audio Out, connect either left or right.
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
  Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the 
  external component/MP3 player.
  Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2 USB  FM.
1.
2.
•
AUX IN 1
Audio OUT
Audio Cable (not supplied)
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
  Connect the Digital Input (OPTICAL) on the
  Home Theater to the Digital Output of the
  external digital component.
  Press the AUX button on the remote control to
  select DIGITAL IN.
You can also use the FUNCTION button on the 
main unit.
The mode switches as follows : 
DVD/CD  D.IN  AUX 1  AUX 2 USB  
FM.
1.
2.
•
AUX IN 2AUX IN 2
AUX IN 2
Optical Cable(not supplied)
AUX IN 2
FM Antenna(supplied)