Samsung Idcs 500 KeySet User Guide

SAMSUNG iDCS 500 SYSTEM
November 2001
iDCS KEYSETUSER GUIDE
Samsung Telecommunications America reserves the right without prior notice to rev\
ise infor-
mation in this guide for any reason. Samsung Telecommunications America also reserves the
right without prior notice to make changes in design or components of eq\
uipment as engi-
neering and manufacturing may warrant. Samsung Telecommunications America disclaims all
liabilities for damages arising from the erroneous interpretation or use\
 of...

TABLE OF CONTENTS
ABOUT THIS BOOK
..........................................................1
THINGS YOU SHOULD KNOW
..........................2–10
ASSEMBLING YOUR KEYSET
................................11
ADDING AN iDCS 14B KEY STRIP
......................12
ADDING A KEYSET DAUGHTERBOARD
MODULE
..............................................................................13
OUTSIDE CALLSMaking an Outside Call ....................................................................14
Answering an Outside...

Executive/Secretary Hotline ..............................................................38
Group Listening ................................................................................39
Account Codes ..................................................................................39
Locking Your Keyset ..........................................................................40
Manual Signalling ..............................................................................40
Off-Hook Voice...

ABOUT THIS BOOK
Your iDCS keyset is the most visible part of your telephone system. No mat-
ter what model keyset you are using telephone calls are handled the same
way. The 28D and 18D keysets have additional conveniences that are not
available to 8D keyset users. These are noted throughout this guide.
Please take the time to study this guide and to become familiar with the op-
eration of your keyset. Keep this guide handy. You may need to look up in-
structions for infrequently used features.
Learning...

3 Your outside calls will light green on your keyset and red on other keysets.
You never lose sight of your calls while they are on hold. They stay right
where you put them and are identified with a green flashing light.
Some simple rules to remember:
 Any steady LED indicates the line or feature is in use.
 A fast flashing green LED indicates a new call ringing in.
 A slow flashing green or red LED indicates a call is on hold.
 A slow flashing amber LED indicates a recall to your keyset....

5
iDCS 28D KEYSET
4FEATURE ACCESS CODESThis user guide is written based on the default access code for using sys-
tem features. If the system numbering plan has been changed some of the
access codes may not be correct. Your installing company can inform you
of the correct codes.SYSTEM TONESThe system provides several tones to assist you. Some of these tones are
already familiar to you.Intercom Dial Tone—A steady tone that indicates you can begin dialing.DIAL TONE
CONTINUOUS
Ringback Tone—Indicates the...

7
iDCS 8D KEYSET
Scroll
HOLDANS/RLS
12
ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0OPER
Call 1 Call 2
Message Transfer
Speaker VOLUMEiDCS 8D
32 CHARACTER DISPLAY
Two lines with 16 characters each.
TERMINAL STATUS INDICATOR
Used to provide your keyset status.
SOFT KEYS Used to
activate features via the
display.
SCROLL KEY Used to
scroll through displays.
8 PROGRAMMABLE KEYS WITH
TRI-COLORED LIGHTS Used to
call stations directly, to indicate
busy conditions of other stations,
for One Touch dialing and many...

8iDCS 64B AOM
12345
678910
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
31 32 33 34 35
36 37 38 39 40
41 42 43 44 45
46 47 48 49 50
51 52 53 54 55
56 57 58 59 60
61 62 63 64
64 PROGRAMMABLE KEYS
WITH RED LIGHTS Used to call
stations directly, to indicate busy
conditions of other stations, for
One Touch dialing and many other
system features.
14 PROGRAMMABLE KEYS
WITH RED LIGHTS Used to call
stations directly, to indicate busy
conditions of other stations, for
One Touch dialing and many...

11
ASSEMBLING YOUR KEYSET
 Place the keyset face down on a flat surface.
 Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.
 Plug the handset cord into the jack marked with the      symbol.
 Route the handset cord out the RIGHT side of the keyset as you look at
it face down.
 Reattach the base pedestal.
 Plug the line cord into the jack on the base of the keyset marked with the...

13
SECURING
SCREWS
REMOVE
KNOCKOUTS
ADDING AN 
iDCS 14 BUTTON KEY STRIP
 Place the keyset face down on a flat surface.
 Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the
keyset body with your fingertips.
 Remove the ribbon cable knockout from the bottom of the keyset.
 Clip the 14 button strip to the side of the keyset.
 Plug one end of the ribbon cable into the keyset and the other end into
the 14 button strip.
...