Samsung LE 19B450 user guide

							English - 9
CHANNEL CONTROL
Configuring	the	Channel	Menu
Country
The PIN number input screen appears. Enter your 4 digit PIN number. 
Analogue Channel
You can change the country for analogue channels.
Digital Channel
You can change the country for digital channels.
Auto Store
You can scan for the frequency ranges available to you (and availability\
 depends on your 
country). Automatically allocated programme numbers may not correspond to actual or desired 
programme numbers. If a channel is locked using the  Child Lock function, the PIN input window appears.
Air / Cable
Antenna source to memorize Digital & Analogue: Digital and Analogue channels. 
Digital: Digital channels. 
Analogue: Analogue channels.
When selecting  Cable	→	Digital	&	 Analogue or Cable	→	Digital
Provide a value to scan for cable channels.
Search	Mode	→	Full	/	Network	/QuickQuick
Network ID: Displays the network identification code.
Frequency: Displays the frequency for the channel. (Differs in each country)
Modulation : Displays available modulation values.
Symbol Rate: Displays available symbol rates.
–
–
–
–
Scans for all channels with active broadcast stations and stores them in\
 the TV’s memory.
If you want to stop Auto Store, press the 
ENTERE button. The Stop Auto Store? message will be displayed. 
Select Yes by pressing the ◄ or ► button, then press the 
ENTERE button.
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the  Child Lock function, the PIN input window appears.
Digital Channel
Manual store for digital channels. Digital Channel  is only available in DTV mode.
Channel: Set the Channel number using the ▲, ▼ or number ( 0~9) buttons.
Frequency: Set the frequency using the number buttons.
Bandwidth : Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
When it has finished, channels are updated in the channel list.
¦
❑
N


❑
N

●
●
●
● N
N
N
❑
N
N

N ●
●
●
N
Country	 		 	 ►
Auto Store
Manual Store
Cable Search Option
Now & Next Guide
Full Guide
Default Guide

 : Full Guide
Channel
BN68-01980D.indb   92009-03-02   �� 7:20:30 
						

							English - 10
Analogue Channel
Manual store for analogue channel.Programme  (Programme number to be assigned to a channel): Sets the programme number  using the ▲, ▼ or number (0~9) 
buttons.
Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or  S 
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) button s to select the required number
 .
You can also select the channel number directly by pressing the number (\
0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard requ\
ired.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the 
frequency range until the first channel or the channel that you selected is receive d on the screen.
Store (When you store the channel and associated programme number): Set to \
 OK by pressing the 
ENTERE button.
Channel mode P (Programme mode): When completing tuning, the broadcasting stations i\
n your area have been assigned to position 
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this 
mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Cable Search Option (depending on the country)
Using this function, you can manually add the channel range to be scanne\
d by Full Search mode of the Auto Store function.Frequency (Start ~ Stop): Displays the frequency for the channel.
Modulation : Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Now & Next Guide / Full Guide
The EPG (Electronic Programme Guide) information is provided by the br\
oadcasters. Programme entries may appear blank or out 
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information 
becomes available. For detailed procedures on using  Now & Next Guide and Full Guide, refer to the descriptions on page 11.
You can also display the guide menu simply by pressing the  GUIDE button. (To configure the Default Guide, refer to the 
descriptions.)
Now & Next Guide
For the six channels indicated in the left-hand column, displays the Cur\
rent programme and the Next programme information. 
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which 
may be scrolled forwards or backwards in time.
Default	Guide	→	Now	&	Next	Guide	/	Full	Guide
You can decide whether to display either the  Now & Next Guide or the Full Guide when the GUIDE button on the remote control 
is pressed. 
Channel List
For detailed procedures on using the  Channel List,refer to the ‘Managing Channels’ instructions.
You can select these options by simply pressing the  CH LIST button on the remote control.
Channel Mode
When press the P >/< button, Channels will be switched within the selected channel list.
Added Ch.
Channels will be switched within the memorized channel list.
Favourite Ch.
Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store 
operation. If the signal is weak or distorted, you may have to fine tune the channel  manually .
Fine tuned channels that have been saved are marked with an asterisk “\
*” on the right-hand side of the channel number in the 
channel banner.
To reset the fine-tuning, select  Reset by pressing the ▲ or ▼ button and then press the ENTER
E button. 
Only Analogue TV channels can be fine tuned.

●
●
●
●
N
N
●
●
N –
–
–
❑
●
●
●
❑
N
O


❑
❑
O
❑


❑
N
N
N
BN68-01980D.indb   102009-03-02   �� 7:20:30 
						

							English - 11
Using the Now & Next Guide / Full Guide
To...Then...
Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guide Press the blue button
If the next programme is selected, it is scheduled with the clock icon d\
isplayed. If the ENTER
E button is pressed again, press 
the ◄, ► button to select  Cancel Schedules, the scheduling is cancelled with the clock icon gone. 
View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button. 
Then press the INFO button when the programme of your choice is 
highlighted.
The programme title is on the upper part of the screen centre. 
Please click on  INFO button for detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality 
Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted 
programme are included on the detailed information. “...” will be \
appeared if the summary is long.
Toggle between the  Now & Next Guide and Full 
Guide Press the red button repeatedly.
In Full Guide 
Scrolls backwards quickly (24 hours). 
Scrolls forwards quickly (24 hours). Press the green button repeatedly.
Press the yellow button repeatedly.
Managing Channels 
Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favourites
Shows all favourite channels.
To select the Favourites channels you have set up, press the  FAV.CH button on the remote 
control.
Programmed
Shows all current reserved programmes. Select a channel in the  All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing 
the ENTER
E button. Then you can watch the selected channel.
Using the Colour buttons with the Channel List Red (Channel Type): Toggle between your  TV, Radio, Data / Other and All.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow  (Select): Selects multiple channel lists. You can perform the add / delete, add to Favourites / delete from 
Favourites, or lock / unlock function for multiple channels at the same \
time. Select the required channels and press the 
yellow button to set all the selected channels at the same time. The 
c mark appears to the left of the selected channels.
TOOLS  (Tools): Displays the Delete (or Add), Add to Favourite  (or Delete from Favourite), Lock (or Unlock), Timer 
Viewing , Edit Channel Name, Sort, Edit Channel Number , Select All, Deselect All or Auto Store menu. (The Options 
menus may differ depending on the situation.)
¦



O

N
N
–
–
–
–
824                  UKTV Gold
825                  UKTV style
A 1             C --A 2                  C --A 3    ♥            C --A 4                  C --A 5                  C --A 6                  C --A 7                  C --
Added Channels
All        ■ Channel Type           ■ Zoom           ■ Select           T Tools
Now & Next GuideDTV Cable 900 f tn                               2:10  Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
NowNextMint ExtraLoadedFresh 40 with Dynamite MCThe DistillerySmash Hits! Sunday
1       f tn
2       ITV Play
3       Kerrang!
4       Kiss
5       oneword
6       Smash Hits!
▼
Street Hypn..
Kisstory
No InformationNo Information
No Information
Freshmen O..
 Watch                Information        	■	Full Guide								■ Exit
Full GuideDTV Cable 900 f tn                               2:10  Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today16:00 - 17:0017:00 - 18:00Mint ExtraLoadedFresh 40 with Dynamite MCThe DistillerySmash Hits! Sunday
1       f tn
2       ITV Play
3       Kerrang!
4       Kiss
5       oneword
6       Smash Hits!
▼
Street Hypn..
Kisstory
No InformationNo Information
No Information
Freshmen O..
 Watch               Information       	■	Now / Next							■ +24 Hours							■ Exit
BN68-01980D.indb   112009-03-02   �� 7:20:31 
						

							English - 12
Channel Status Display Icons
A : An analogue channel.
c: A channel selected by pressing the yellow button.
*: A channel set as a Favourite.
(: A programme currently being broadcast.
\: A locked channel.
): A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want. All deleted channels will be shown on  All Channels menu.
A gray-coloured channel indicates the channel has been deleted. 
The Add menu only appears for deleted channels.
You can also delete a channel from the  Added Channels or Favourite menu in the same 
manner.
Add to Favourite /  Delete from Favourite
You can set channels you watch frequently as favourites. Press the TOOLS  button to display the Tools  menu. You can also set the Add to Favourite 
by selecting  Tools → Add to Favourite .
The ‘
*’ symbol will be displayed and the channel will be set as a favourite.
All favourite channels will be shown on  Favourite menu.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatical\
ly switched to the reserved channel in the Channel List; 
even when you are watching another channel. To reserve a programme, set the current time first. (See page 19.) Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a programme will be shown in the  Programmed menu.
Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme  Guide for the channel appears. 
 You can 
reserve a programme according to the procedures described above.
Edit Channel Name (analogue channels only)
Channels can labelled so that their call letters appear whenever the cha\
nnel is selected. The names of digital broadcasting channels are automatically assigned an\
d cannot be labelled.
Edit Channel Number (digital channels only)
You can also edit the channel number by pressing the number buttons on th\
e remote control.
Sort (analogue channels only)
This operation allows you to change the programme numbers of the stored \
channels. This operation may be necessary after using 
the auto store.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed.\
 This function is available only when the  Child Lock is 
set to On. (see page 20)
The PIN number input screen appears. Enter your 4 digit PIN number. 
The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting  Change PIN from the menu.
The ‘
\’ symbol will be displayed and the channel will be locked.
Select All / Deselect All Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels.
You can only select  Deselect All when there is a selected channel.
Auto Store For further details on setting up options, refer to page 9.
If a channel is locked using the  Child Lock function, the PIN input window appears.
N
●
●
●
●
●
●
N
N

N
N
N
N

T N
N

N
N
N
N

N



N
N
N

●
●
N

N
N
824                  UKTV Gold
825                  UKTV style
A 1             C --A 2                  C --A 3    ♥            C --A 4                  C --A 5                  C --A 6                  C --A 7                  C --
Added Channels
All       ■ Channel Type        ■ Zoom        ■ Select       T Tools
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Lock
▼
BN68-01980D.indb   122009-03-02   �� 7:20:31 
						

							English - 13
Channel List Option Menu (in Programmed )
You can view, modify or delete a reservation.Press the TOOLS  button to use the option menu.
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (You can also change the reservation information.)
Select All
Select all reserved programmes.
N




PICTURE CONTROL
Configuring	the	Picture	Menu
Mode
You can select the type of picture which best corresponds to your viewing\
 requirements. Press the TOOLS  button to display the Tools menu. You can also set the picture mode by 
selecting  Tools → Picture Mode.
Dynamic
Selects the picture for high-definition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Movie
Selects the picture for viewing movies in a dark room. 
Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)
Your television has several setting options that allow you to control the\
 picture quality. Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture
Sharpness: Adjusts the edge definition of the picture.
Colour: Adjusts colour saturation of the picture.
Tint(G/R) : Adjusts the colour tint of the picture.  
Select a picture mode to be adjusted first. The adjusted values are saved for each picture mode.
When you make changes to  Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/R) , the OSD will be adjusted 
accordingly.
In analogue  TV, Ext., AV modes of the PAL system, you cannot use the Tint(G/R)  Function.
In PC mode, you can only make changes to  Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have co\
nnected to an input of the TV.
The energy consumed during use can be significantly reduced if the brightness le vel of the picture is reduced, which will 
reduce the overall running cost.
Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous 
models. See below to adjust detailed picture settings.
Advanced Settings is available in  Standard or Movie mode.
In PC mode, you can only make changes to  Gamma and White Balance from among the 
Advanced Settings items.
Black	Tone	→	Off	/	Dark	/	Darker	/	Darkest
You can select the black level on the screen to adjust the screen depth.
¦
❑
T



❑
●
●
●
●
●
●
N
N
N
N
N
N
❑
N
N

1 / 1 / 2009
13:59  5 TV1  Quincy, M.E
18:59  2 TV3  The Equalizer
20:59  2 TV3  McMillan & Wife
Programmed
         All             ■	Zoom					■	Select				T Tools    E Information
Change Info
Cancel Schedules
Information
Select All
 
Mode	 :	Standard		 ►
Backlight  : 7 
Contrast  : 95
Brightness  : 45
Sharpness  : 50
Colour  : 50
Tint (G / R)  : G50 / R50
Picture
Colour : 50
Tint (G / R)  : G50 / R50
Advanced	Settings		 	 ►
Picture Options
Picture Reset
Picture
BN68-01980D.indb   132009-03-02   �� 7:20:31 
						

							English - 14
Dynamic Contrast	→	Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provid\
ed.
Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours.\
 Select your favourite Colour Space to experience the 
most natural colour. Native: Native Colour Space offers deep and rich colour tone.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone \
based on programme sources.
White Balance
You can adjust the colour temperature for more natural picture colours. R-Offset /  G-Offset /  B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by 
changing the values of R, G, B. Recommended for advanced users only.
Reset : The previously adjusted white balance will be reset to the factory defau\
lts.
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture. Changing the adjustment value will refresh the adjusted screen.
Edge	Enhancement	→	Off	/	On
You can emphasize object boundaries in the picture.
Picture Options
In PC mode, you can only make changes to the  Colour Tone and Size from among the items in Picture Options .
Colour	Tone	→	Cool	/	Normal	/	Warm1	/	Warm2
You can select the most comfortable colour tone to your eyes. Settings can be adjusted and stored for each external device you have co\
nnected to an input of the TV.
Warm1 or Warm2 is only activated when the picture mode is  Movie.
Size
You can select the picture size which best corresponds to your viewing re\
quirements.  Press the TOOLS  button to display the Tools  menu. You can also set the size by selecting  Tools	→	Picture	Size.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasti\
ng.
Wide Zoom : Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals 
are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only 1:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have co\
nnected to an input of the TV.
Temporary image retention may occur when viewing a static image on the se\
t for more than two hours.
Wide Zoom : Press the ► button to Select  Position, then press the ENTER
E button. Press the ▲ or ▼ button to move the 
picture up / down. Then press the  ENTERE button.
Zoom: Press the ► button to Select  Position, then press the ENTER
E button. Press the ▲ or ▼ button to move the picture 
up and down. Then press the ENTERE button. Press the ► button to Select  Size, then press the ENTERE button. Press 
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.  Then press the ENTERE button.
After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode: Select  Position by pressing the ◄ or ►button. Use 
the ▲, ▼, ◄ or ► button to move the picture.
Reset : Press the ◄ or ► button to select  Reset, then press the ENTER
E button. You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, l\
eft and right as in the Overscan 
function.



●
●

●
●

N

❑
N

N
N

T
●
●
●
●
●
●
N
N
N
N
N
N
N
N
N
BN68-01980D.indb   142009-03-02   �� 7:20:31 
						

							English - 1
Screen	Mode	→	16:9	/	Wide	Zoom	/	Zoom	/	4:3
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS 
(Wide Screen Service) image or nothing. Each individual European count\
ry requires different picture size so this function is 
intended for users to select it.
1:9: Sets the picture to 16:9 wide mode.
Wide Zoom : Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
This function is available in  Auto Wide mode.
This function is not available in  PC, Component or HDMI mode.
Digital	NR	→	Off	/	Low	/	Medium	/	High	/	 Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static 
and ghosting that may appear on the screen. When the signal is weak, select one of the other options until the best \
picture is displayed.
HDMI	Black	Level	→	Normal	/	Low
You can directly select the black level on the screen to adjust the scree\
n depth. This function is active only when the external input connects to HDMI (\
RGB signals).
Film	Mode	→	Off	/	 Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Film Mode  is supported in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Picture Reset 	→	Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
Reset Picture Mode: Current picture values return to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, 
depending upon your particular version of Windows and your particular vi\
deo card. However, even if your actual screens look 
different, the same basic set-up information will apply in almost all cases\
. (If not, contact your computer manufacturer or Samsung 
Dealer.)
1.
  First, click on ‘Control Panel’ on the Windows start menu.
2.

  When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.
3.

  When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.
4.

  Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution): Optimum-1360 X 768 pixels
If a vertical-frequency option exists on your display settings dialog bo\
x, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click 
‘OK’ and exit the dialog box.

●
●
●
●
N
N

N

N

N
❑
N ●
¦
BN68-01980D.indb   152009-03-02   �� 7:20:31 
						

							English - 1
Display Modes
Both screen position and size will vary depending on the type of PC moni\
tor and its resolution. The resolutions in the table are 
recommended.D-Sub and HDMI/DVI Input
Mode Resolution Horizontal Frequency 
(KHz) Vertical Frequency 
(Hz) Pixel Clock Frequency 
(MHz) Sync Polarity 
(H / V)
IBM 640 x 350 31.46970.086 25.175+/-
720 x 400 31.469 70.087 28.322-/+
MAC 640 x 480 35.00066.667 30.240-/-
832 x 624 49.726 74.551 57.284-/-
VESA CVT 720 x 576 35.91059.950 32.750-/+
1280 x 720 44.772 59.855 74.500-/+
1280 x 720 56.456 74.777 95.750-/+
VESA DMT 640 x 480 31.46959.940 25.175-/-
640 x 480 37.500 75.000 31.500-/-
640 x 480 37.861 72.809 31.500-/-
800 x 600 37.879 60.317 40.000+/+
800 x 600 46.875 75.000 49.500+/+
800 x 600 48.077 72.188 50.000+/+
1024 x 768 48.363 60.004 65.000-/-
1024 x 768 56.476 70.069 75.000-/-
1024 x 768 60.023 75.029 78.750+/+
1360 x 768 47.712 60.015 85.500+/+
VESA GTF 1280 x 720 52.50070.000 89.040-/+
When using an HDMI / DVI cable connection, you must use the  HDMI (DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selec\
ted.
Separate and Composite modes are supported. SOG is not supported.
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC\
 video signal. The 
values of fine, coarse and position are adjusted automatically. This function does not work in DVI-HDMI mode.
Press the TOOLS  button to display the Tools menu. You can also set the Auto Adjustment 
by selecting  Tools → Auto Adjustment .
Screen
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture\
 noise. If the noise is not removed by Fine-tuning alone, 
then adjust the frequency as best as possible (Coarse) and Fine-tune a\
gain. After the noise has been reduced, readjust the picture 
so that it is aligned on the centre of screen.
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press 
the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.

N
N
N
N
¦
N
❑
N
T
❑



Brightness  : 45 
Sharpness
  : 50
Auto	Adjustment	 	 	 ►
Screen 
Advanced Settings 
Picture Options   
Picture Reset 
Picture
BN68-01980D.indb   162009-03-02   �� 7:20:31 
						

							English - 1
SOUND CONTROL
Configuring	the	Sound	Menu
Mode	→	Standard	/	Music	/	Movie	/	Clear	Voice	/	Custom
You can select a sound mode to suit your personal preferences.Press the TOOLS  button to display the Tools  menu. You can also configure the sound 
mode by selecting  Tools	→	Sound	Mode .
Standard
Selects the normal sound mode.
Music
Emphasizes music over voices.
Movie
Provides the best sound for movies.
Clear Voice
Emphasizes voice over other sounds.
Custom
Recalls your customized sound settings.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Mode
You can select a sound mode to suit your personal preferences.
Balance
Controls the balance between the right and left speakers.
100Hz /  300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)
To adjust the level of different bandwidth frequencies
Reset
Resets the equalizer settings to the default values.
SRS	TruSurround	HD	→	Off	/	On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two 
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, 
including internal television speakers. It is fully compatible with all \
multichannel formats. Press the TOOLS  button to display the Tools menu. You can also set the SRS TruSurround HD by selecting  Tools	→	SRS	TS	
HD.
Audio Language (digital channels only)
You can change the default value for audio languages. Displays the langua\
ge information for the incoming stream.
You can only select the language among the actual languages being broadca\
st.
Audio	Format	→	MPEG	/	Dolby	Digital	 (digital channels only)
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed 
difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
The Audio Format appears according to the broadcasting signal.
¦
❑
T





❑




❑
T
❑
N
❑
N
N
Mode	 :	Custom	 ►
Equalizer
SRS TruSurround HD  : Off
Audio Language  : - - -
Audio Format  : - - -
Audio Description
Auto V
 olume  : Off
Sound
BN68-01980D.indb   172009-03-02   �� 7:20:32 
						

							English - 18
Audio Description (digital channels only)
This is an auxiliary audio function that provides an additional audio tr\
ack for visually challenged persons. This function handles the 
Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the 
Audio Description On or Off and control the volume.
Audio	Description	→	Off	/	On
Turn the audio description function on or off.
Volume
 You can adjust the audio description volume.Volume is active when Audio Description  is set to On.
Auto	Volume	→	Off	/	On
Each broadcasting station has its own signal conditions, and so it is no\
t easy to adjust the volume every time the channel is 
changed. This feature lets you automatically adjust the volume of the desired cha\
nnel by lowering the sound output when the 
modulation signal is high or by raising the sound output when the modula\
tion signal is low.
Speaker	Select	→	External	Speaker	/	TV	Speaker
If you want to hear the sound through separate speakers, cancel the internal ampl ifier.
The volume and  MUTE buttons do not operate when the  Speaker Select is set to External Speaker .
If you select External Speaker  in the Speaker Select menu, the sound settings will be limited.
Sound	Reset	→	Reset	 All	/	Reset	Sound	Mode	/	Cancel
You can restore the Sound settings to the factory defaults.
Selecting the Sound Mode
You can set the sound mode in the  Tools menu. When you set to Dual l ll , the current sound mode is displayed on the screen.
Audio Type Dual 1 / 2 Default
A2 Stereo Mono
MONO
Automatic change
Stereo STEREO	↔	MONO
Dual DUAL	
 1	↔	DUAL 	2 DUAL 1
NICAM  Stereo Mono
MONO
Automatic change
Stereo MONO	↔	STEREO
Dual MONO	↔	DUAL
	
 1	
DUAL 2 DUAL 1
If the stereo signal is weak and an automatic switching occurs, then swi\
tch to the mono.
This function is only activated in stereo sound signal. It is deactivate\
d in mono sound signal.
This function is only available in TV mode.
❑


N
❑
❑
N
N
❑
¦
N
N
N
BN68-01980D.indb   182009-03-02   �� 7:20:32