Samsung Md230x6 User Manual

							Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • For instructions on how to assemble 1 x 3 or 2 x 3, refer to the assembly guide provided with the product packaging.
•Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product later. 
• If any items are missing, contact your dealer.
• Contact a local dealer to purchase optional items.
 
Monitor
CONTENTS
Quick Setup GuideProduct Warranty User Manual Power Cord
DVI Cable DP Cable Multi Control Pad Magnetic Rubber ( X 2 )
OPTIONAL PARTS
D-Sub Cable
 
						

							2-2Installing the Product  
2-2 Connecting the Cables for 1 x 1
 The connecting part may differ depending on the product model.
 
1.Connect the product to a PC depending on the video output supported by the PC.
• When the graphics card provides D-Sub (Analog) output.
•Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable. 
• When the graphics card provides DVI (Digital) output
• Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.
2.Connect one end of the power cord to the [POWER] port of the Primary Monitor and connect the other end of the power cord to the 
220V or 110V wall outlet. 
(The input voltage is switched automatically.)
 
						

							Installing the Product2-2
POWER S/W : Turns the product on and off.
 •When the product is connected to a PC, you can turn the product on and use it.
•When both the DVI () and D-Sub () cables are connected, you can select the input signal <
Digital / Analog> by 
pressing the [  SOURCE] button on the multi control pad.
 
 
						

							2-3Installing the Product  
2-3 Connecting the Cables for 1 x 3 and 2 x 3
 •For instructions on how to assemble 1 x 3 or 2 x 3, refer to the assembly guide provided with the product packaging.
•To connect DP cables, the PC must have DP ports.
• Connect the power cord and multi control pad to one of the installed monitors. This monitor becomes the primary 
monitor.
• The cables dont have to be connected in a particular order, but we recommend the procedure below.
 
1. Using a Single Screen
1-1. Connecting the DP Cables
 : Primary Monitor
1.
Connect the [DP] ports of the PC and all the installed monitors using DP cables.
 Using a Single Screen Using Multiple Screens Specifying the Monitor Number
 
						

							Installing the Product2-3
1-2. Connecting the Multi Control Pad
 : Primary Monitor
1.
Connect the multi control pad to the primary monitor using a USB cable.
2.Connect the [UP] port on the primary monitor to the [DOWN] port on one of the adjacent monitors using a USB cable.
 • Monitors have no function buttons. To adjust functions, use the multi control pad.
• The monitors connected via USB cables can be controlled simultaneously by using the multi control pad. 
 
A monitor which is not connected via a USB cable cannot be controlled.
• The multi control pad can be connected to any of the provided monitors.
 
 
						

							2-3Installing the Product  
1-3. Connecting the Power Cord
 : Primary Monitor
1.
Connect the primary monitor and the rest of the installed monitors using power cap cords.
2.Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the 220V or 
110V wall outlet.
(The input voltage is switched automatically.)
3.POWER S/W : Turns the product on and off.
 • When the product is connected to a PC, you can turn the product on and use it.
•
If DP () cables are used for the connection, select the input signal  by pressing SELECT ALL and [ 
SOURCE
] on the multi control pad.
• The power cord can be connected to any of the provided monitors, as required. However, we recommend the connections 
suggested above.
 
 
						

							Installing the Product2-3
2. Using Multiple Screens
2-1. Option 1
1.Connect each monitor to the corresponding PC using the DVI or D-Sub cable.
2.Each PC screen can be viewed.
 To use multiple screens, select each monitor using the control keypad and press [   SOURCE] to select an appropriate input 
signal  for each monitor.
 
2-2. Option 2
1.Connect the monitors numbered as 1 to a PC using DP cables.
 Connect them to the same PC.
 
2.Connect the monitors numbered as 2 and 3 to the corresponding PC respectively using DVI or D-Sub cables.
 To use multiple screens, select each monitor using the control keypad and press [   SOURCE] to select an appropriate 
input signal  for each monitor.
 
 
						

							2-3Installing the Product  
3. Specifying the Monitor Number
 The monitor number is set to 0 by default.
A monitor can be controlled by the multi-control pad even if the monitor number is not specified.
 
1.Press the [MONITOR SELECTION] button on the back of the monitor to specify the monitor number.
(Range: 1 - 6)
2.To control the monitor you want, press the monitor number below MONITOR SELECTION on the multi-control pad.
 To control all of the connected monitors, press SELECT ALL on the multi-control pad.
 
 
						

							Installing the Product2-4
2-4 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the 
shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User 
Manual supplied with the locking device for more information.
 You must purchase the Kensington Lock separately. 
 
To lock the product, follow these steps:
1.
Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
2.Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the Monitor ( ).
4.Lock the lock ( ).
 •These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
• You can purchase the locking device from an electronics store, an online shop, or our service center.
 
 
						

							3-1Using the product  
3 Using the product
3-1 Setting the Optimal Resolution 
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
 • The message appears up to 3 times if the resolution has not been set to the optimal resolution.
• To set the resolution to the optimal resolution
1. When the PC is turned off, connect the product and the PC and turn the power on.
2. Right-click over the Desktop and select 
Properties from the pop-up menu.
3. In the 
Settings tab, set the resolution to the optimal resolution.
 
▲/▼ : You can select a language with these buttons.
 
SETUP/MENU : If you press this button, the message 
disappears.