Samsung Nx 300 M Owners Manual

							120
Playback/Editing > Editing photos
Retouching faces
1 Touch  → .
2 Press [C/F] to adjust the option.
• You can also drag the slider or touch +/- to adjust the option.
• As the number increases, the skin tone becomes brighter and 
smoother.
3 Touch OK.
• To cancel correction, touch .
4 Touch  to save.
Reducing red-eye
1 Touch  → . 
2 Touch OK.
• To cancel correction, touch .
3 Touch  to save. 
						

							121
Playback/Editing > Editing photos
Applying Smart Filter effects
Apply special effects to your photos.
1 Touch , and then touch an option.
Smart Filter : Vignetting
OptionDescription
OriginalNo effect
VignettingApply the retro-looking colors, high contrast, 
and strong vignette effect of Lomo cameras.
MiniatureApply a tilt-shift effect to make the subject 
appear in miniature.
Colored PencilApply a colored pencil painting effect.
WatercolorApply a watercolor painting effect.
Wash drawingApply a washed-out effect.
OptionDescription
Oil SketchApply an oil painting effect.
Ink SketchApply an ink painting effect. 
AcrylApply an acryl painting effect.
NegativeApply a negative film effect.
RedDesaturate all colors but red.
GreenDesaturate all colors but green.
BlueDesaturate all colors but blue.
YellowDesaturate all colors but yellow. 
2 Touch OK.
3 Touch  to save. 
						

							Chapter 4
Wireless network
Learn how to connect to wireless local area networks (WLANs) and use functions. 
						

							123
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a 
WLAN. You can also configure network settings.
Connecting to a WLAN
1 Rotate the mode dial to B.
2 Select , , , or .
3 Press [m], and then select Wi-Fi Setting.
• In some modes, follow the on-screen instructions until the Wi-Fi 
Setting screen appears.
• The camera automatically searches for available AP devices.
4 Select an AP.
Back
Refresh
Samsung1
Samsung2
Samsung3
Samsung4
• Select Refresh to refresh connectable APs.
• Select Add wireless network to add an AP manually. Your AP name 
must be in English to add the AP manually.
Icon/Option Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [F] or touch to open network setting options.
• When you select a secured AP, a pop-up window appears. Enter the 
required passwords to connect to the WLAN. For information about 
entering text, refer to "Entering text". (p. 127)
• When a login page appears, refer to "Using the login browser".  
(p. 125)
• When you select an unsecured AP, the camera will connect to the 
WLAN.
• If you select a WPS profile supported AP, select  → WPS PIN 
connection, and then enter a PIN on the AP device. You can also 
connect to a WPS profile supported AP by selecting 
 → WPS 
button connection  on the camera, and then pushing the  WPS 
button on the AP device.
• The same AP may be listed twice, with different frequencies, 
because your camera supports the dual band function. 
						

							124
Wireless network > Connecting to a WLAN and configuring network settings
Setting network options
1 In the Wi-Fi Setting screen, move to an AP, and then press 
[F] or touch 
.
2 Select each option, and then enter the required information.
OptionDescription
Network PasswordEnter the network password.
IP SettingSet the IP address automatically or manually.
Manually setting the IP address
1 In the Wi-Fi Setting screen, move to an AP, and then press 
[F] or touch 
.
2 Select IP Setting → Manual.
3 Select each option, and then enter the required information.
OptionDescription
IPEnter the static IP address.
Subnet MaskEnter the subnet mask.
GatewayEnter the gateway.
DNS ServerEnter the DNS address. 
						

							125
Wireless network > Connecting to a WLAN and configuring network settings
Using the login browser
You can enter your login information via the login browser when 
connecting to some APs, sharing sites, or cloud servers.
Icon Description
Close the login browser.
Move to the previous page.
Move to the next page.
Stop loading the page.
Reload the page.
• You may not be able to select some items depending on the page you 
connected to. This does not indicate a malfunction.
• The login browser may not close automatically after you log into some pages. 
If this occurs, close the login browser by touching 
, and then proceed with 
the desired operation.
• It may take longer to load the login page due to the page size or network 
speed. If this occurs, wait until the login information input window appears. 
						

							126
Wireless network > Connecting to a WLAN and configuring network settings
Network connection tips
• You must insert a memory card to use the Wi-Fi features.
• The quality of the network connection will be determined by the AP.
• The further the distance between your camera and the AP, the longer it 
will take to connect to the network.
• If a nearby device is using the same radio frequency signal as your 
camera, it may interrupt your connection.
• If your AP name is not in English, the camera may not be able to locate 
the device or the name may appear incorrectly.
• For network settings or a password, contact your network administrator 
or network service provider.
• If a WLAN requires authentication from the service provider, you may 
not be able to connect to it. To connect the WLAN, contact your network 
service provider.
• Depending on the encryption type, the number of digits in the password 
may differ.
• A WLAN connection may not be possible in all surroundings.
• The camera may display a WLAN enabled printer on the AP List. You 
cannot connect to a network via a printer.
• You cannot connect your camera to a network and a TV simultaneously.
• Connecting to a network may incur additional charges. Costs will vary 
based on the conditions of your contract.
• If you cannot connect to a WLAN, try another AP from the available AP 
list.
• A login page may appear when you select free WLANs provided by some 
network service providers. Enter your ID and password to connect to 
the WLAN. For information about registering or the service, contact the 
network service providers.
• Be cautious when you enter personal information for an AP connection. 
Do not enter any payment or credit card information on your camera. 
The manufacturer is not liable for any problem caused by entering such 
information.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio transmission 
laws in your region. To ensure compliance, use the WLAN feature only in 
the country where you purchased the camera.
• The process for adjusting network settings may differ, depending on 
network conditions.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully charged.
• You cannot upload or send files captured in some modes.
• Files that you transfer to another device may not be supported by the 
device. In this case, use a computer to play back the files. 
						

							127
Wireless network > Connecting to a WLAN and configuring network settings
Entering text
Learn how to enter text. The icons in the table let you move the cursor, 
change the case, etc. Touch a key to enter it.
Icon Description
Move the cursor.
Stop entering text and return to the previous page.
Change case.
Switch between Symbol/Number mode and the normal mode.
Change the input language.
Enter a space.
Save the displayed text.
Delete the last letter.
• You can use only the English alphabets in some modes, regardless of the 
display language.
• You can enter up to 64 characters.
• The screen may differ depending on the input mode.
• Touch and hold a key to enter the character at the upper right corner of the 
key. 
						

							128
Wireless network
Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare 
feature via a WLAN. When you capture a photo with your camera, the 
photo is saved to the smart phone automatically.
• The AutoShare feature is supported by Galaxy series smart phones or Galaxy 
Tab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0 
or higher. Before using this feature, check the device’s firmware and update it 
if needed.
• You should install Samsung SMART CAMERA App on your phone or device 
before using this feature. You can download the application from Samsung 
Apps, the Google Play Store, or the Apple App Store. Samsung SMART 
CAMERA App is compatible with Samsung camera models manufactured in 
2013 or later.
• To install and launch Samsung SMART CAMERA App on an NFC-enabled 
smart phone, turn on the NFC feature and place the smart phone near an NFC 
tag (p. 30) on the camera. This feature is supported by smart phones running 
Android OS 2.3 or higher. This feature is not available for iOS devices.
• You must insert a memory card to use this feature.
• If you set this function, the setting is maintained even when you change the 
Shooting mode.
• This feature may not be supported in some modes or may not be available 
with some shooting options.
1 On the camera, in Shooting mode, press [m].
2 On the camera, select 1 → AutoShare → On.
• If the pop-up message that prompts you to download the 
application appears, select  Next.
3 On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the 
application.
• To start the application automatically on an NFC-enabled smart 
phone, turn on the function and place the smart phone near 
the NFC tag (p. 30) on the camera. Verify that the smart phone is 
connected to your camera, and then skip to step 6.
4 Select the camera from the list and connect the smart phone 
to the camera.
• The smart phone can connect to only one camera at a time.
5 On the camera, allow the smart phone to connect to your 
camera.
• If the smart phone has been connected to your camera before, it is 
connected automatically.
• An icon that shows the connection status () will appear on the 
camera’s screen.
6 On the camera, capture a photo.
• The captured photo is saved to the camera, and then transferred to 
the smart phone.
• If you recorded a video, it is saved only to the camera. 
						

							129
Wireless network
The camera connects to a smart phone that supports the MobileLink 
feature via a WLAN. You can easily send photos or videos to your smart 
phone.
• The MobileLink feature is supported by Galaxy series smart phones or Galaxy 
Tab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0 
or higher. Before using this feature, check the device’s firmware and update it 
if needed.
• You should install Samsung SMART CAMERA App on your phone or device 
before using this feature. You can download the application from Samsung 
Apps, the Google Play Store, or the Apple App Store. Samsung SMART 
CAMERA App is compatible with Samsung camera models manufactured in 
2013 or later.
• To install and launch Samsung SMART CAMERA App on an NFC-enabled 
smart phone, turn on the NFC feature and place the smart phone near an NFC 
tag (p. 30) on the camera. This feature is supported by smart phones running 
Android OS 2.3 or higher. This feature is not available for iOS devices.
• When there are no files in the camera memory, you cannot use this feature.
• If you select files from the smart phone, you can view up to 1,000 recent files 
and send up to 150 files at a time. If you select files from the camera, you can 
view files that were selected from the camera. The maximum number of files 
that can be sent varies depending on the storage space of the smart phone.
• When you send Full HD videos using MobileLink feature, you may not be able 
to play back files on some devices.
• When using this feature on an iOS device, the device may lose its Wi-Fi 
connection.
• You cannot send RAW files.
1 On the camera, rotate the mode dial to B.
2 On the camera, select .
• If the pop-up message that prompts you to download the 
application appears, select Next.
3 On the camera, select a sending option.
• If you select Select Files from Smartphone, you can use your 
smart phone to view and share files stored on the camera.
• If you select Select Files from Camera, you can select files to send 
from the camera.
4 On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the 
application.
• To start the application automatically on an NFC-enabled smart 
phone, turn on the function and place the smart phone near 
the NFC tag (p. 30) on the camera. Verify that the smart phone is 
connected to your camera, and then skip to step 7.
Sending photos or videos to a smart phone