Samsung Projector Sp P310me User Manual

							 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
The images here are for referenc e only, and are not applicable in all cases (or countries).
Failure to follow the instructions marked with this symbol may  cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.    
 
 
|  Power Related | Installation Related  | Cleaning and Use Related  | 
    
 
 
  
Insert the power plug firmly so that it does not come loose. 
zWhen the connection is not firm, it may cause a fire.  
  Do not use loose power outlets  or damaged power cables. 
zThere is a danger of electric shock or fire.  
  
Under no circumstances touch the power plug with wet hands. 
zThere is a danger of electric shock.  
  Do not plug multiple devices into a single wall outlet.  
zThere is a danger of fire.  
  
Do not bend the power cord excessively or place heavy objects o n it. 
zThere is a danger of ele ctric shock or fire.  
  
Before moving the product, make s ure the power is off and remove the power cord 
from the wall outlet. In addition, make sure all connection cab les are disconnected 
from other devices before moving it. 
zMoving the product without disco nnecting the power cord may damage the 
power cord and cause elec tric shock or fire.  
  
						

							  Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of ele ctric shock or fire.  
  
Do not let water or any liquid come into contact with the adapt er. 
zThis may cause electric shock or fire.  
zAvoid using the product near liqu id or outdoors (i.e. rain, snow).  
zMake sure the adapter is not exposed to wetness when cleaning.   
  
Do not place multiple power a dapters next to each other. 
zThere is a danger of fire.  
  
Keep the adapter away from heaters. 
zThere is a danger of fire.  
  
Remove the plastic packaging from the adapter before use. 
zThere is a danger of fire.  
  Keep the adapter in a well-ventilated location.   
  
 
 
 
|  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 
  Do not place candles, mosquito sticks, cigarettes, etc. on top  of the product or 
place heaters nearby.  
zThere is a danger of fire.   
						

							  When installing the product in a  cabinet or on a shelf, make sure the front end of 
the base does not protrude. 
zDropping the product may damage it or cause injury.  
   Keep the power cord away from heaters. 
zThe coating of the pow er cord may melt and cause electric shock  or fire.  
  
Do not install the product in locations exposed to oil, smoke,  moisture or water 
(rainwater), or in a vehicle. 
zThere is a danger of ele ctric shock or fire.  
  
Do not install the product in locations with poor ventilation s uch as a bookshelf, 
closet, etc.  
zAn increase in the internal te mperature may cause a fire.  
  
Do not install on an unstable location, or on a stand smaller t han the product. 
zIf the product falls it may harm children. Install on a flat and stable location 
as the front part is heavy.  
   In case of thunder/lightning, di sconnect the power cord from the wall outlet. 
 
  
Make sure the product's vents are  not blocked by a table cloth or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on th e ground carefully. 
zDoing so may cause damage or injury.  
   
						

							Do not drop the product while carrying it. 
zDoing so may cause damage or injury.  
  Keep the product out of children’s reach. 
zIf the product falls it may caus e harm to children. Install on a flat and 
stable location as the f ront part is heavy.  
  
 
 
 
|  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
  
  Do not insert any metal such as chopsticks, wires, gimlets, or  inflammable objects 
such as paper into the vents, the PC/COMPOSITE port, the Power  port or the Battery 
port. 
zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the pro duct off, 
disconnect the power  cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product nea r flammable sprays or other such substances. 
zThere is a danger of f ire or explosion.  
  
Do not place containers with water, vases, drinks, chemicals, s mall metal parts or 
heavy objects on the product. 
zIf water enters the product, it m ay cause electric shock, or fire and when 
heavy objects fall, it may cause injury.  
   Do not let children place objects such as toys or cookies on th e product. 
zIf a child tries to reach for any of these objects, the product  may fall and 
cause harm.  
  
Do not look directly at the ligh t of the lamp nor project the picture onto eyes. 
zThis is dangerous espe cially for children.   
						

							 
  If the product emits smoke, unus ual noise, or there is a burning smell,disconnect 
the power plug immediately, and contact a  Service Center. 
zThere is a danger of ele ctric shock or fire.  
  
If the power plug pin  or jack is exposed to dust, water or alie n substances, clean it 
thoroughly. 
   Ask a  Service Center  to clean the product internally at least once a year. 
zDust which has accumulated in the interior over an extended per iod of time 
may cause fire or a malfunction.  
   When cleaning the product, discon nect the power cord and wipe the product using 
a soft dry cloth.  
zDo not use any chemicals such as wax, benzene, alcohol, thinner s, 
insecticide, air freshener, lubricant or detergent.  
   When not using the product for an extended period of time, disc onnect the power 
plug. 
zOtherwise, this may cause heat emission from the accumulated di rt or 
degraded insulation, leading to electric shock or fire.  
  Do not install the product in places with heavy dust, chemical  substances, high or 
low temperatures, high humidity, or where it will be operated f or a long period 
continuously etc.  
  
If the product is dropped or the  casing is damaged, turn the product off and unplug 
the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Take care not to lose the  lens cover of the product. 
zThis may damage the lens.   
						

							Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) - Europe only 
(Applicable in the European Union  and other European countries with separate collection 
systems)  
 
This marking shown on the product or its literature, indicates  that it should not be 
disposed with other household wa ste at the end of its working life. To prevent possible 
harm to the environment or damag e to health from uncontrolled waste disposal, please 
separate this from other types of waste and recycle it responsi bly to promote the 
sustainable reuse of material resources. 
 
Household users should contact ei ther the retailer where they purchased this product, or 
their local government office, fo r details of where and how they can take this item for 
environmentally safe recycling.  
 
Business users should contact the ir supplier and check the terms and conditions of the 
purchase contract. This product s hould not be mixed with other commercial wastes for 
disposal.  
						

							 
 
 |  Product Features  | Product Views  | Battery (sold separately)  | Product Specifications  | 
 
 
 
The SP-P310 is a custom made projector designed for important marketing activities and presentations of the active 
business person! This Portable Projector SP-P310ME provides hig h mobility and ease of use. 
 
  High Mobility Design 
 
  - Small Size.  
- Lightweight. 
  
 
 
  A Battery Pack that Enables Projection without Connecting a Po wer 
Cord
 
( For more information about the battery, refer to the battery de scription. ) 
 
  - The Projector is operable with a charged battery.  
- You can enjoy screen viewing without connecting the power cor
d. 
 
 
  Next Generation Backlight Light Source, LED Lamp  
 
     - Effective energy saving by using low voltage. 
						

							  
  
1. Power Button []   
To turn it on   
Press the Power button. The Power LED will light 
up and the power is turned on.  
To turn it off   
Press the Power button until the Power LED is 
turned off.  
  
2.  Menu Button []   
Press to display the OSD menu.  
This is also used to exit the OSD or to return to a 
higher level of the OSD menu.  
  
3. Adjustment Button []   
Press to move the OSD menu or to adjust a value 
on the menu screen.  
  
4.  Enter Button [] / SOURCE Button  
Press to select an OSD menu or to select an 
input source. 
When pressing the 'SOURCE' button when the 
menu screen is not displayed, the input source 
(PC, Composite)is switched.  
  
5. SERVICE  
The SERVICE terminal is used for after-sales 
services only.  
  
6. PC/COMPOSITE  
To connect a PC or VCR, the PC/Composite 
cable must be connected here.  
       
  
7. POWER LED  
If you turn the projector on, the Power LED lights 
up and if you turn it off, the Power LED turns off 
accordingly.  
  
8. TEMP LED  
This lights up when the product is abnormal 
because of hot temperature.Refer to the  Status of 
the Operating LEDs .  
  
9. Power Port []   
To supply power, the power adapter must be 
connected.  
  
10.  Lens  
  
11. Focus Ring  
Move it to the left or right to sharpen the image.  
  
12.  Battery Port  
Install the designated battery to this port. 
( For more information about the battery, refer to 
the battery description. )  
    
 
 
 
|  Product Features  | Product Views  | Battery (sold separately)  | Product Specifications  | 
 
 
 
 
   Your Projector  
  
						

							      
Quick Installation Guide  Warranty  
(Not available in all locations)  User Manual CD  
  
  
  Adapter   Power Cord   PC/Composite cable     
    Lens Cover   Stand ( View Stand Installation)   Carrying Case  
   
   
Use only the adapter supplied with the product. 
To purchase an additional adapte r, contact your dealer or nearby service center. 
 
    
     Optional Accessories 
  
  
Battery   Video Cable  
 
The following parts are sold separately. To purchase optional m odule, contact your dealer or nearby service 
center. 
   Status of Operating LEDs   
 
            : On,   : Off
POWER
(BLUE)   TEMP
(RED)   Description  
The product is turned off. 
The product is operating normally.
The internal temperature of the product is higher than normal. 
Requires checking. 
Power will be turned off s oon to protect the product.
The cooling fan inside of the product is not operating normally . Requires checking. 
Power will be turned off s oon to protect the product. 
  
    
    
  
 
 Accessories