Samsung Rsh7znpn User Manual

setting up _11
01 SETTING UP
LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator, 
you will want to make sure the refrigerator is level 
so you can then make fi nal adjustments. If the 
refrigerator is not level, it will not be possible to get 
the doors perfectly even.
The front of the refrigerator is also 
adjustable.
When the Freezer door is lower than the 
fridge
Insert a fl at-blade screwdriver into a notch on the 
Leg, turn it clockwise or counter clockwise to level 
the...

12_ setting up
CHECKING THE WATER 
DISPENSER LINE (OPTIONAL)
A water dispenser is just one of the helpful features 
on your new Samsung refrigerator. To help promote 
better health, the Samsung water fi lter removes 
unwanted particles from your water. However, it 
does not sterilize or destroy microorganisms. You 
will need to purchase a water purifying system 
to do that. In order for the icemaker to operate 
properly, water pressure of 138~862 kPa is 
required. Under normal conditions, a 170 cc paper...

setting up _13
01 SETTING UP
After connecting the water supply to the water  4. 
fi lter, turn your main water supply back on and 
dispense about 1l to clear and prime the water 
fi lter.
Connecting the water line to the 
refrigerator
Remove the dust cap from the water line on the  1. 
rear of the unit and fi t a compression nut from 
the install kit.
Remove the water pipe from the install kit and  2. 
fi t a compression nut to one end.
Join the two pipes together using the  3. 
compression joint from the...

14_ setting up
select the location where the purifi er is to 
install. (Model with the purifi er)
If you wish to reassemble the water inlet    -
and outlet sides of the purifi er during purifi er 
installation, see the reference illustration.
Cut the water line attached to the purifi er to the    -
appropriate place after measuring the distance 
between the purifi er and the cold water tap.
Replacement InstructionsShut off water supply. 1. 
Note the Flow direction on the fi lter. 2. 
Insert water supply tube...

setting up _15
01 SETTING UP
Connect the water line to the refrigerator.Remove the compressor cover of the    -
refrigerator.
Connect the water line to the valve, as shown in    -
the fi gure.
When connected, check if there is any leakage.    -
If any, repeat the connection.
Reattach the compressor cover of the    -
refrigerator.
Secure the water line.Using clip ”A”, fi x the    -
water line to the wall (the 
back of refrigerator).
When the water line    -
is secure, make sure 
whether the water line 
is...

16_ operating
OPERATING THE REFRIGERATOR
Using the Control Panel / Digital 
Display 
1
POWER 
FREEZE 
BUTTONSpeeds up the time needed to 
freeze products in the freezer. 
This can be helpful if you need 
to quickly freeze items that spoil 
easily or if the temperature in the 
freezer has warmed dramatically 
(For example, if the door was left 
open).
2
FREEZER 
BUTTONPress the Freezer button to 
set the freezer to your desired 
temperature, You can set the 
temperature between -14 °C (8 °F) 
and -25 ºC...

operating _17
02 OPERATING
CONTROLLING THE 
TEMPERATURE
Controlling the Freezer temperatureThe freezer temperature can be set between 
-14 °C (8 °F) and -25 ºC (-14 °F) to suit your 
particular needs. Press the Freezer button 
repeatedly until the desired temperature is shown 
in the temperature display. Keep in mind that foods 
like ice cream may melt at -16 ºC (4 °F).
The temperature display will move sequentially 
from -14 °C (8 °F) and -25 ºC (-14 °F). When the 
display reaches -14 ºC (8 °F), it will...

18_ operating
•  Do not put your fi ngers, hands or any 
other unsuitable objects in the chute or 
ice-maker bucket.
It may result in personal injury or material    -
damage.
Never put fi nger or any other objects in the  • 
dispenser opening.
It may cause injury.   -
Use only the ice maker provided with the  • 
refrigerator.
The water supply to this refrigerator must only  • 
be installed/connected by a suitably qualifi ed 
person and connect to a potable water supply 
only.
In order to operate the ice...

operating _19
02 OPERATING
Zero Zone (0 ºC)When “Zero Zone” is chosen, the temperature  • 
of the CoolSelect Zone™ Drawer is kept at 0 ºC 
regardless of the set refrigerator temperature.
“Zero Zone” temperature helps keep meat or  • 
fi sh fresh longer.
CoolWhen “Cool” is chosen, the temperature will  • 
be the same as the set temperature of the 
refrigerator. The digital panel shows the same 
temperature as that of the display panel.
The CoolSelect Zone™ Drawer allows extra  • 
refrigerator space....

20_ operating
REMOVING THE FRIDGE 
ACCESSORIES
Remove the spill Proof Glass Shelf by pulling  1. 
the shelf out as far as it will go. Then, gently lift 
it up and gently remove it.  
Remove the Vegetable & Fruit Drawer by  2. 
pressing on the indentations found on the inside 
left and right sides of the Veggie Box/Dry Box 
cover and remove by pulling forward.
Holding the drawer with 
one hand, lift it up a 
little bit while pulling it 
forward and take it out 
of the refrigerator.
Remove the Gallon Door...