Home > Samsung > Monitor > Samsung S24b300h User Manual

Samsung S24b300h User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung S24b300h User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1-4Major Safety Precautions
    Maintaining the Correct Posture when Using this Product 
    Be careful that adaptor should not be in contact 
    with water and therefore not be wet. 
    • This may cause a malfunction, electric 
    shock or fire. Do not use adaptor by the 
    waterside or outside particularly when it 
    rains or snows. Be careful that adaptor 
    should not be wet while cleaning floor with 
    water.Watching the product from too close a distance 
    continuously may damage your eyesight.
    Avoid using a humidifier or cooker near the 
    product.
    • Otherwise, it may result in electric shock or 
    fire.It is important to give your eyes some rest (5 
    minutes every hour) when viewing the product 
    screen for long periods of time.
    • This will alleviate any eye strain.
    Since the display panel is hot after using it for a 
    long time, do not touch the product.Keep small accessories away from the children.
    Take care when adjusting the angle of the 
    product or the height of the stand.
    • If your hand or finger is caught, you may be 
    injured.
    • If the product is tilted excessively, the 
    product may fall and this may result in 
    injury.Avoid placing a heavy object over the product.
    • Otherwise, it may result in a problem with 
    the product or injury.
    Maintain the correct posture when using this product.
    • Straighten your back.
    • Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and 
    face the screen forwards.
    • Adjust the angle of the product so that light is not reflected onto the screen.
    • Keep your elbow at a right angle and keep your arm level with the back of your hand.
    • Keep your elbow at a right angle.
    • Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or 
    higher and maintain the position of your arm so that your arm is below your heart.
     
    						
    							Installing the Product2-1
    2 Installing the Product
    2-1 Package Contents
     • Unpack the product and check if all of the following contents have been included.
    • Store the packaging box in case you need to move the Product at a later stage.
     
    Monitor
     The cables provided may vary depending on the product you purchase. 
    Contents
    Installation ManualProduct Warranty
    (Not available in all locations) User Manual Stand
    Stand Connector DC-Adapter Power Cord
    OPTION
    HDMI Cable HDMI to DVI Cable  D-Sub Cable  DVI Cable
     
    						
    							2-2Installing the Product
    2-2 Installing the Stand
     Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
    Insert the Stand Connector into the Stand in the direction shown by the figure.
    Check if the Stand Connector is firmly connected.
    Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
    Place a soft cloth over the table to protect the product and place the product onto the 
    cloth so that the front of the product is facing downwards.
     
    						
    							Installing the Product2-2
     Disassembly is in the reverse order of the assembly. 
    Hold the main body of the product with your hand as shown by the figure.
    Push the assembled stand into the main body in the direction of the arrow as shown in 
    the figure.
    - Caution
    Avoid lifting the product holding only the stand.
     
    						
    							2-3Installing the Product
    2-3 Connecting with a PC
     The connecting part may differ depending on the product model. 
    1.Connect the product to a PC depending on the video output supported by the PC.
    •  When the graphics card provides D-Sub	Analog
    output
    • Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
    •  When the graphics card provides DVI	Digital
     output
    •  Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable.
     The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. 
    •Connect the [HDMI IN] port of the product to the [DVI] port on your PC using the HDMI to DVI cable.
     
    						
    							Installing the Product2-3
     The [HDMI IN] terminal is supplied for the HDMI-dedicated models only. 
    2.Connect the power adapter to [DC] jack on the rear of the product. Connect the power cord to the adapter and wall socket.
    (The input voltage is switched automatically.)
     When the product is connected to a PC, you can turn the product on and use it. 
     
    						
    							2-4Installing the Product
    2-4 Connecting a HDMI cable
    Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable.
     The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
     
     
    						
    							Installing the Product2-5
    2-5 Kensington Lock
    A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
    Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
    refer to the User Manual supplied with the locking device for more information.
     You must purchase the Kensington Lock separately. 
    To lock the product, follow these steps: 
    1.Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
    2.Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
    3.Insert the locking device into the Kensington slot on the Monitor( ).
    4.Lock the lock( ).
     • These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
    •
    You can purchase the locking device from an electronics store, an online shop, or our service center. 
     
    						
    							3-1Using the product
    3 Using the product
    3-1 Setting the Optimal Resolution 
    If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
    Select a language and the optimal resolution.
     • The message appears up to 3 times if the resolution has not been set to the optimal resolution.
    • To set the resolution to the optimal resolution
    • When the PC is turned off, connect the product and the PC and turn the power on.
    • Right-click over the Desktop and select Properties from the pop-up menu.
    • In the Settings tab, set the resolution to the optimal resolution.
     
    ▲/▼ : You can select a language with these buttons.
    MENU : If you press this button, the message disappears.
     
    						
    							Using the product3-2
    3-2 Standard Signal Mode Table
     This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is 
    dependent on the screen size.
    Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting 
    the resolution to the optimal resolution of the product.
     
    If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from 
    the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. 
    Therefore, configure it as follows referring to the User Manual of the graphics card.
     
    S19B300N
    Horizontal Frequency
    The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
    and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
    Vertical Frequency
    A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This 
    frequency is called the vertical frequency. The vertical frequency is represented in Hz.
    DISPLAY MODEHORIZONTAL 
    FREQUENCY (KHZ)VERTICAL 
    FREQUENCY  (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/
    V)
    IBM, 720 x 400 31.469 70.087 28.322 -/+
    MAC, 640 x 480 35.000 66.667 30.240 -/-
    MAC, 832 x 624 49.726 74.551 57.284 -/-
    VESA, 640 x 480 31.469 59.940 25.175 -/-
    VESA, 640 x 480 37.861 72.809 31.500 -/-
    VESA, 640 x 480 37.500 75.000 31.500 -/-
    VESA, 800 x 600 35.156 56.250 36.000 +/+
    VESA, 800 x 600 37.879 60.317 40.000 +/+
    VESA, 800 x 600 48.077 72.188 50.000 +/+
    VESA, 800 x 600 46.875 75.000 49.500 +/+
    VESA, 1024 x 768 48.363 60.004 65.000 -/-
    VESA, 1024 x 768 56.476 70.069 75.000 -/-
    VESA, 1024 x 768 60.023 75.029 78.750 +/+
    VESA, 1280 x 720 45.000 60.000 74.250 +/+
    VESA, 1366 x 768 47.712 59.790 85.500 +/+
     
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung S24b300h User Manual