Samsung Samtron 73v Quick Start Guide

MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse adjustment may 
move the screen image area. You may relocate it to the center 
using the Horizontal Control menu.
Fine
Removes noise such as horizontal stripes. If the noise persists 
even after Fine tuning,  
repeat it after adjusting the frequency (clock speed).
SharpnessFollow these instuction to change the clearance of image.
H-PositionFollow these instructions to change the horizontal position of the 
monitors entire...

MenuDescriptionPlay/Stop
LanguageFollow these steps to change the language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note:The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-PositonYou can change the vertical position where the OSD menu 
appears on your monitor....

MenuDescriptionPlay/Stop
Image ResetImage parameters are replaced with the factory default values.
Color ResetColor parameters are replaced with the factory default values.
 
 
 Information 
MenuDescription
InformationShows a video source, display mode on the OSD screen. 
 

 
 
Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do n eed assistance, please call, the phone number on the Information 
section or contact your dealer .
 
 
SymptomCheck ListSolutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected properly?Check the power cord connection and 
supply. 
Can you see  Check Signal Cable  on 
the screen? Check the signal cable connection.
If the power is on,...

 
system is rebooted.) 
There is no image on the screen.  
Is the power indicator on the monitor 
blinking at 1 second intervals?The monitor is in PowerSaver mode. 
 
press a key on the keyboard to activate 
the monitor and restore the image on 
the screen.
The screen shows 
strange colors or just 
black and white.Is the screen displaying only one color 
as if looking at the screen through a 
cellophane paper? Check the signal cable 
connection.Make sure the video card is 
fully inserted in its slot....

 
 
 Q & A 
QuestionAnswer
How can I change the frequency?Frequency can be changed by reconfiguring the video card.  
 
Note that video card support can vary, depending on the version of the 
driver used. (Refer to the computer or the video card manual for 
details.) 
How can I adjust the resolution?Windows ME/XP/2000 : Set the resolution at the Control 
Panel
→Display
→Settings.  
 
* Contact the video card manufacturer for details.
How can I set the Power Saving 
function?Windows ME/XP/2000 : Set the...

 
 
 Warning Messages  
 
If there is something wrong with the input signal, a message appears on the screen or the screen 
goes blank although the power indicator LED is still on. The message may indicate that the monitor 
is out of scan range or that you need to check the signal cable. 
 
 
 
 Environment  
 
The location and the position of the monitor may influence the quality and other features of 
the monitor. 
1. if there are any sub woofer speakers near the monitor, unplug and relocate the woofer...

 
Select Model Name   
 
 
 General 
General
Model NameSAMTRON 73V
LCD Panel
Size17inch Diagonal
Display area337.92 (H) x 270.336 (V)
Pixel Pitch0.264mm (H) x 0.264mm (V)
Typea-si TFT active matrix
Synchronization
Horizontal30 ~ 81 kHz
Vertical56 ~ 75 Hz
Display Color
16,194,277 Colors 
Resolution
Optimum resolution1280 x 1024@60 Hz
Maximum resolution1280 x 1024@75 Hz
Input Signal, Terminated
RGB Analog, 0.7 Vpp positive at 75 ohms 
Separate H/V sync, TTL level positive or negative.
Maximum Pixel Clock...

15pin-to-15pin D-sub cable, Detachable
Power Consumption(maximum)
Less than 34W 
Dimensions (WxDxH)/ Weight
382.0 x 62.0 x 320.5 mm (Without Stand) 
382.0 x 175.0 x 383.7 mm (with Basic Stand)/4.55kg
VESA Mounting Interface
100mm x 100mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
OperatingTemperature: 50°F ~ 104°F(10°C ~ 40°C)  
Humidity: 10% ~ 80%, non-condensing
StorageTemperature: -4°F ~113°F (-20°C ~ 45°C)  
Humidity: 5% ~ 95%, non-condensing
Plug and Play...

  
 
   
 
Preset Timing Modes 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will 
be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. 
Refer to the video card manual and adjust the screen as follows.  
 
Table 1. Preset Timing Modes 
Display Mode
Horizontal 
Frequency 
(kHz)Vertical 
Frequency 
(Hz) Pixel Clock 
(MHz) Sync Polarity 
(H/V)
IBM, 640 x 350  31.469  70.086  25.175  +/- 
IBM,...