Samsung Series 7 User Guide

101
Using MDC
3
3 Using MDC
zAdd on the sub level: Create a sub-group under the selected group.
3Enter the group name.
Deleting Groups
1Select a group name, and click  Edit.
2In the Edit Group  window displayed, click  Delete.
3Click Yes. The group will be deleted.
Renaming Groups
1Select a group name, and click  Edit.
2In the Edit Group  window displayed, click  Rename.
3If a cursor appears in the old group name, enter a new group name.
Rename 

102
Using MDC
3
3 Using MDC
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1Click All Schedule List  in the schedule section on the left side of the program window. The  Add 
button will be enable d in the middle.
2Click the Add button. The  Add Schedule  window will appear. 

103
Using MDC
3
3 Using MDC
3Click Add below the  Device Group  item, and select the group you want to add a schedule to.
4Select Date&Time/Action  and click OK. The schedule will be added  and a list of schedules will 
appear in the set list window.
zDevice Group : Select a group.
zDate&Time
†Instant Execution : Run the schedule immediately.
†Timer: Set the date, time and interval to run the schedule.
zAction : Select a function that  will activate at the specified time and interval.
Schedule...

104
Using MDC
3
3 Using MDC
3.3.14 Troubleshooting Guide
 This program may malfunction sometimes due to a communication problem between the PC and 
display or electromagnetic waves emitted from nearby electronic devices.
 
IssueSolution
The display you want to control 
does not appear on the system 
information chart. 1. Check the connection of the RS232C cable (check that the 
cable is properly connected to appropriate serial port).
2. Check that another display with a duplicate  ID is not 
connected....

105
Using MDC
3
3 Using MDC
How display properties are shown when multiple displays are used
1When no display is selected: The default value is displayed.
2When one display is selected: Settings for the selected display are displayed.
3When two displays are selected (e.g. in sequence of  ID 1 and ID  3): The settings for  ID 1 are 
displayed before the settings for  ID 3.
4When the All +Select checkbox is checked and all displays are selected: The default settings are 
displayed. 

1064 Screen Adjustment
4 
Screen Adjustment
Configure the Picture settings ( Brightness , Color Tone , etc.).
 The layout of the  Picture menu options may vary depending on the product. 
4.1 Picture Mode
 MENU []   Picture  Picture Mode   ENTER [ ]
Select a picture mode ( Picture Mode) suitable for the environment where the product will be used.  
Different  Picture Mode  options are displayed depending on the current input source.
4.1.1 If the input source is  PC, DVI or DisplayPort
zInformation: This...

107
Screen Adjustment
4
4 Screen Adjustment
zBD Wise: Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater 
products which support  BD Wise. When BD Wise  is turned  On, the picture mode is automatically 
changed to the optimal resolution.
 Available when you connect Samsung products that support  BD Wise through an HDMI cable to the 
product.
 
4.2 Backlight / Contrast / Brig htness / Sharpness / Color / 
Tint (G/R)
  MENU []   Picture  ENTER [ ]
Your monitor has several...

108
Screen Adjustment
4
4 Screen Adjustment
4.3 Screen Adjustment
 MENU []   Picture  Screen Adjustment   ENTER [ ]
4.3.1 Picture Size
If you have a cable box or satellite receiver, it may ha ve its own set of screen sizes as well. However, we 
highly recommend you use your product’s  16:9 mode most of the time.
z16:9: Sets the picture to 16:9 wide mode.
zZoom1 : Use for moderate magnification. Cuts off the top and sides.
zZoom2: Use for a stronger magnification.
zSmart View 1 : Reduces the 16:9 picture...

109
Screen Adjustment
4
4 Screen Adjustment
zCustom: Changes the resolution to suit the user's preferences.
zOriginal Ratio : If the input source is  PC, DVI , HDMI  (PC connection), or DP , the video will display in 
the original aspect ratio.
 Available ports may differ depending on the model. (page 29)
 
 You can adjust and store settings for each externa l device you have connected to an input on the 
product.
 
Picture Sizes available by Input Source.
Input SourcePicture Size
ATV 16:9, Zoom1 ,...

110
Screen Adjustment
4
4 Screen Adjustment
4.3.2 Position
Adjusts the picture position. Position is only available if Picture Size  is set to Zoom1, Zoom2 , Wide Fit , 
Screen fit  or Custom.
zTo use the  Position function after selecting  Zoom1, Zoom2 , Wide Fit , Screen fit  or Custom , 
follow these steps.
1Press the   button to select  Position. Press the [ ] button.
2Press the   or   button to move the picture up or down.
3Press the [ ] button.
zTo use the  Position function after selecting  Screen...