Samsung Sp A600b User Manual

							Installation and Connection2-2
2-2 Installing the Projector
 Install the projector so that the beam from the projector is perpendicular to the screen. 
•Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the 
screen may not be a rectangle. 
•Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed 
clearly.
•When installing the screen in bright surroundings, use curtains.
•You can install the projector in the following locations: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling.(To view the 
installation position settings) 
 
To view the picture when installing the projector behind the screen
To view the picture when installing the projector in the front of the screen
2-3 Leveling with Adjustable Feet 
 You may adjust the level of the projector up to 3 degrees.
Depending on the position of the projector, Keystone distortion of the image may appear. 
 
Install a semi-transparent screen.
Select Menu > Setup > Install > Rear-Floor 
Install the projector in the front where you are watching the 
screen.
Select Menu > Setup > Install > Front-Floor 
For level placement of the projector, adjust the Adjustable Feet of 
the projector. 
Downloaded From projector-manual.com Samsung Manuals 
						

							2-4Installation and Connection  
2-4 Zoom and Focus Adjustment 
 If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection 
Distance), the focus cannot be adjusted correctly.
 
2-5 Screen Size and Projection Distance 
Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If 
images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom
X. Screen width /  Y. Screen height / M. Screen Diagonal length
 Zoom Knob : You can adjust the size of the image within the 
zoom range by manipulating the Zoom Knob. 
 Focus Ring : Focus the picture on the screen using the 
Focus Ring.
SCREEN SIZE
HORIZONTALVERTICALTELEWIDEOFFSET 
XYZ Y
INCHESMM(MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) 
401016 886 / 34.9 498 / 19.6 1762 / 69.4 1355 / 53.3 62 / 2.4
501270 1107 / 43.6 623 / 24.5 2203 / 86.3 1694 / 66.7 78 / 3.1
601524 1328 / 52.3 747 / 29.4 2643 / 104.1 2032 / 80 93 / 3.7
701778 1550 / 61.0 872 / 34.3 3084 / 121.4 2371 / 93.3 109 / 4.3
802032 1771 / 69.7 996 / 39.2 3524 / 138.7 2710 / 106.7 125 / 4.9
902286  1992 / 78.4 1121 / 44.1 3965 / 156.1 3048 / 120 140 / 5.5
1002540 2214 / 87.2 1245 / 49.0 4405 / 173.4 3387 / 133.3 156 / 6.1
1102794 2435 / 95.9 1370 / 53.9 4846 / 190.8 3726 / 146.7 171 / 6.7
1203048 2657 / 104.6 1494 / 58.8 5287 / 208.1 4065 / 160.0 187 / 7.4
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-6
 This projector is designed to show images optimally on a 100 ~ 120 inch screen.
 
2-6 Lamp Replacement
Cautions on Lamp Replacement
• The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. 
You can view the lamp usage time in the Information Display (INFO button).
• Use the recommended lamp when replacing. Replace with the same model provided with the projector.
- Lamp Model Name : 220W Philips fusion lamp (BP96-02183A)
- Lamp Manufacture : Philips Lighting
- Lamp Life Time : 3000Hrs 
- Lamp Type : 220W UHP
• Check that the power cord is unplugged before replacing the lamp.
• Even after the power cord has been disconnected, the lamp will be hot. Allow it to cool down for at least 1 hour before 
changing the lamp.
• The lamp is located at the bottom of the product.
• Before you turn the projector over to change the lamp, cover the projector with a soft cloth on a flat surface.
• Do not leave the old lamp near inflammables or in reach of children. There is a danger of burn or injury.
• Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.
• When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, it may affect 
the screen quality and shorten its lifetime.
Contains Mercury, Dispose According to Local, State or Federal Laws
1303302 2878 / 113.3 1619 / 63.7 5727 / 225.5 4403 / 173.3 202 / 8.0
1403556 3099 / 122.0 1743 / 68.6 6168 / 242.8 4742 / 186.7 218 / 8.6
1503810 3321 / 130.7 1868 / 73.5 6608 / 260.2 5081 / 200.0 233 / 9.2
1604064  3542 / 139.4 1992 / 78.4 7049 / 277.5 5419 / 213.3 249 / 9.8
1704318 3763 / 148.1 2117 / 83.3 7489 / 294.8 5758 / 226.7 265 / 10.4
1804572 3985 / 156.9 2241 / 88.2 7930 / 312.2 6097 / 240.0 280 / 11.0
1904826 4206 / 165.6 2366 / 93.1 8370 / 329.5 6436 / 253.4 296 / 11.7
2005080 4428 / 174.3 2491 / 98.1 8811 / 346.9 6774 / 266.7 311 / 12.2
2105334 4649 / 183.0 2615 / 103.0 9251 / 364.2 7113/ 280.0 327 / 12.9
2205588 4870 / 191.7 2740 / 107.9 9692 / 381.6 7452/ 293.4 342 / 13.5
2305842 5092 / 200.5 2864 / 112.8 10133 / 398.9 7790 / 306.7 358 / 14.1
2406096 5313 / 209.2 2989 / 117.7 10573 / 416.3 8129 / 320.0 374 / 14.7
2506350 5535 / 217.9 3113 / 122.6 11014 / 433.6 8468 / 333.4 389 / 15.3
3007620 6641 / 261.5 3736 / 147.1 13216 / 520.3 10161 / 400.0 467 / 18.4
SCREEN SIZE
HORIZONTALVERTICALTELEWIDEOFFSET 
XYZ Y
INCHESMM(MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) (MM / 
INCHES) 
Downloaded From projector-manual.com Samsung Manuals 
						

							2-6Installation and Connection  
Lamp Replacement Procedure
1.The lamp is very hot and operates with a high voltage. Allow it to cool down for at least 1 hour after disconnecting the power 
cord before changing the lamp.
2.The lamp is located at the bottom of the product.
Place the product so that its bottom looks upward and remove the screws that hold the lamp cover in place.
* When placing the product with the bottom upwards, make sure to place a soft cloth on the surface to prevent scratches.
3.Slide and open the cover in the direction of the arrow, as shown in the figure.
4.Remove the screws indicated in the figure.
5.Hold and pull the lamp handle slightly, as shown in the figure.
 Inserting a new lamp is in the reverse order of the removal.
 
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-7
2-7 Connecting with a PC 
1.Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2.When connections are all completed, connect both power cords of the projector and the PC.
 This product supports plug and play and therefore, if you use Windows XP, you do not need to setup the driver on your PC. 
Using the Projector 
1.Turn on the projector and press the [PC] button to select .
If PC Mode is not available, check if the PC video cable is in place.
2.Turn on the PC and set the PC Environment when necessary. 
3.Adjust the screen.(Auto Adjustment)
 • Sound comes out from PC speakers.
• To avoid experiencing a blank screen when connecting a PC, set  in the Edit Name menu. See section 3-5-1 for 
more detail.
 
2-8 Setting up the PC Environment 
Check the following items before connecting your PC to your projector. 
1.Click the right mouse button on the Windows desktop and click on [Properties]. 
 tab will appear.
2.Click on [Settings] tab and set the  by referring to  described in the display mode table 
supported by this projector.
You do not have to change the  setup. 
Downloaded From projector-manual.com Samsung Manuals 
						

							2-9Installation and Connection  
3.Press the [Advanced] button. Another property window will appear.
4.Click on [Monitor] tab and set the  by referring to  described in the Supported 
Resolution/Size Modes table. 
This will set both the vertical and horizontal frequencies.
5.Click the [OK] button to close the window, and click the [OK] button of the  window to close the window. 
The computer may restart automatically. 
6.Shut down the PC and connect to the projector.
 •Process might vary depending on your type of computer or Windows version. 
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
•This product supports up to 32 bits per pixel when it is used as a PC monitor.
•Projected images may differ from the monitor depending on the monitor manufacturer or Windows versions.
•For connecting it to your PC, you must set your PC display properties to the values supported by the projector or  may be displayed.
 
2-9 Supported Display Modes
DISPLAY MODEDISPLAY 
FORMATHORIZONTAL 
FREQUENCY 
(KHZ)VERTICAL 
FREQUENCY 
(HZ)CLOCK 
FREQUENCY(
MHZ)POLARITY 
(H/V)
IBM 640 x 35070Hz31.469 70.086 25.175 +/-
IBM 720 x 40070Hz31.469 70.087 28.322 -/+
VESA 
DMT 640 x 48060Hz31.469 59.940 25.175 -/-
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-9
MAC 640 x 48067Hz35.000 66.667 30.240 -/-
VESA GTF 640 x 48070Hz35.000 70.000 28.560
VESA 
DMT 640 x 48072Hz37.861 72.809 31.500 -/-
VESA 
DMT 640 x 48075Hz37.500 75.000 31.500 -/-
VESA CVT720 x 57660Hz35.910 59.950 32.750 -/+
VESA 
DMT800 x 60056Hz35.156 56.250 36.000 +/+ 
VESA 
DMT800 x 60060Hz37.879 60.317 40.000 +/+ 
VESA GTF800 x 60070Hz43.750 70.000 45.500
VESA 
DMT800 x 60072Hz48.077 72.188 50.000 +/+ 
VESA 
DMT800 x 60075Hz46.875 75.000 49.500 +/+ 
MAC832 x 62475Hz49.726 74.551 57.284 -/-
VESA 
DMT1024 x 76860Hz48.363 60.004 65.000 -/-
VESA 
DMT1024 x 76870Hz56.476 70.069 75.000 -/-
VESA GTF1024 x 76872Hz57.672 72.000 78.434
VESA 
DMT1024 x 76875Hz60.023 75.029 78.750 +/+
VESA CVT1152 x 86460Hz53.783 59.959 81.750 -/+ 
VESA GTF1152 x 86470Hz63.000 70.000 96.768
VESA GTF1152 x 86472Hz 64.872 72.000 99.643
VESA 
DMT1152 x 86475Hz 67.500 75.000108.000+/+
MAC1152 x 87075Hz 68.681 75.062 100.000 -/-
VESA CVT 1280 x 720 60Hz 44.772 59.855 74.500 -/+ 
VESA GTF 1280 x 720 70Hz 52.500 70.000 89.040
VESA GTF 1280 x 720 72Hz 54.072 72.000 91.706
VESA CVT 1280 x 720 75Hz 56.456 74.777 95.750 -/+ 
VESA 
DMT1280 x 76860Hz 47.776 59.870 79.500 -/+ 
VESA 
DMT1280 x 76875Hz 60.289 74.893 102.250 -/+ 
VESA 
DMT1280 x 80060Hz 49.702 59.810 83.500 -/+ 
VESA 
DMT1280 x 80075Hz 62.795 74.934 106.500 -/+ 
DISPLAY MODEDISPLAY 
FORMATHORIZONTAL 
FREQUENCY 
(KHZ)VERTICAL 
FREQUENCY 
(HZ)CLOCK 
FREQUENCY(
MHZ)POLARITY 
(H/V)
Downloaded From projector-manual.com Samsung Manuals 
						

							2-10Installation and Connection  
2-10 Connecting the Power
VESA 
DMT1280 x 80060Hz 60.000 60.000 108.000 +/+ 
VESA GTF1280 x 96070Hz 69.930 70.000 120.839
VESA GTF1280 x 96072Hz 72.072 72.000 124.540
VESA CVT1280 x 96075Hz 75.231 74.857130.000-/+ 
VESA 
DMT1280 x 102460Hz 63.981 60.020 108.000 +/+ 
VESA GTF1280 x 102470Hz 74.620 70.000 128.943
VESA GTF1280 x 102472Hz 76.824 72.000 132.752
VESA 
DMT1280 x 102475Hz 79.976 75.025 135.000 +/+ 
VESA 
DMT1440 x 90060Hz 55.935 59.887 106.500 -/+ 
VESA 
DMT1440 x 90075Hz 70.635 74.984 136.750 -/+ 
VESA 
DMT1600 x 120060Hz 75.000 60.000 162.000 +/+ 
VESA 
DMT1680 x 1050 RB60Hz 64.674 59.883 119.000 +/-
VESA 
DMT1680 x 1050 60Hz 65.290 59.954 146.250 -/+ 
VESA CVT1920 x 1080RB60Hz 66.587 59.934 138.500 +/- 
VESA 
DMT1920 x 1200 RB60Hz 74.038 59.950 154.000 +/- 
DISPLAY MODEDISPLAY 
FORMATHORIZONTAL 
FREQUENCY 
(KHZ)VERTICAL 
FREQUENCY 
(HZ)CLOCK 
FREQUENCY(
MHZ)POLARITY 
(H/V)
Downloaded From projector-manual.com Samsung Manuals 
						

							Installation and Connection2-11
1.Plug the power cord into the power terminal on the rear side of the projector. 
2-11 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
1.Connecting using an HDMI/DVI cable
•Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/
Satellite box using an HDMI/DVI cable.
Connecting using an HDMI cable
• Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output terminal of the DVD 
player/Cable/Satellite box using an HDMI cable.
2.When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.
Using the Projector 
1.Turn on the projector and press the [HDMI] button to select  or .
 •This projector does not support sound. (Separate audio system is needed for sound.) 
2-12 Connecting a DVD player/Cable/Satellite Box via Component
1.Connect the [COMPONENT IN (Y/PB/ PR)] input port at the back of the projector to the Component port at the back of the 
DVD player/Cable/Satellite box with a Component cable.
2.When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.
Using the Projector 
1.Turn on the projector and press the [COMP] button to select .
 Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr), depending on the manufacturer. 
Downloaded From projector-manual.com Samsung Manuals 
						

							2-13Installation and Connection  
2-13 Connecting to VCR/Camcorder
1.Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using a video 
cable.
If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. 
Using the S-VIDEO connection provides a higher visual quality.
2.When finishing connecting the devices, connect the power of the projector and the VCR/Camcorder.
Using the Projector 
1.Turn on the projector and press the [Video] button to select .
or
Press the [S-VIDEO] button to select .
 •Check that the projector and the video equipment are turned off before connecting cables.
•This projector does not support sound. (Separate audio system is needed for sound.)
 
Downloaded From projector-manual.com Samsung Manuals