Samsung Sp D300b User Manual

 
 
 
 
 
 
 
 
 
normal operating 
condition.
Action 3  When temperature inside 
of the projector becomes 
too high. Adjust the installation state of 
your projector by referring to the 
Installation Precautions section listed above. Cool down your 
projector sufficiently and then  operate it again. If the same problem 
occurs continually, contact  your product distributor or service center. 
Action 4  When the color wheel fails to 
operate. Disconnect and reconnect the power cord and start the...

 
 
 
 
|  Product Features | Product Views | Remote Control | Product Specifications | 
 
 
 
 
 
 
 
1.ON ( ) Button
2.AUTO Button
3. MENU ( ) Button
4.Move (▲ ▼ ◀ ▶)/( ) Button
5.V.KEYSTONE(+/-)  
(VERTICAL KEYSTONE)Button
6. VIDEO Button
7. S-VIDEO Button
8. P.SIZE Button 
9. COMP Button
10. OFF ( ) Button
11.RETURN ( ) Button
12.
EXIT ( ) Button
13.INFO STILL Button
14. HDMI Button
15. INSTALL Button
16. P.MODE Button
17. PC Button
  
  1.
ON ( )  
Used to turn on the projector. 
 
2. AUTO  Adjusts...

 
11. RETURN ( ) 
Returns to the previous menu.  
 
12. EXIT ( ) 
Used to make Menu Screen disappear.  
 
13. INFO STILL  INFO: Used to check source signa ls, picture setup, PC screen adjustment and lamp lifespan. 
STILL: Used to see still images.  
 
14. HDMI   Used to switch to HDMI Mode. 
 
15. INSTALL  Used to flip or reverse the projected image. 
 
16. P.MODE   Used to select Picture Mode. 
 
17. PC  Used to switch to PC Mode.  
   
 
 
|  Product Features | Product Views | Remote Control | Product...

 
Keystone   Vertical 
User 
Environment   Temperature 
and Humidity  Operating 
Temperature 32 °F ~ 104 °F (0 °C ~ 40 °C),  
Humidity (10 % ~ 80 %) 
Storage  Temperature -4 °F ~ 113 °F (-20 °C ~ 45 °C) ,  
Humidity (5 % ~ 95 %) 
This Class B equipment is designed for home and office use. The
 equipment has been registered regarding 
EMI for residential use. It may be used in all areas. Class A i s for office use. Class A is for business while 
class B emits less electromagnetic waves than class A....

   
 
HDMI  1024X768
48.36 N 60 N 65 Sep.
60.02 P 75 P 78.75 Sep.
1280X768 47.78 N 60 P 79.5 Sep.
1280X960 60 P 60 P 108 Sep.
1280X1024 63.98 P 60 P 108 Sep.
79.98 P 75 P 135 Sep.
1920x1080i 33.72 P 60 P 74.18 Sep.
28.125 P 50 P 74.25 Sep.
1280x720p 45 P 60 P 74.25 Sep.
37.5 P 50 P 74.25 Sep.
720x480p 31.5 P 60 P 27 Sep.
720x576p 31.25 P 50 P 27 Sep.
720x480i 15.73 P 60 P 13.5 Sep.
720x576i 15.63 P 50 P 13.5 Sep.
 Supported Resolution/Size Modes  
  
○ : Size & Overscan can be configured, x : Size &...

Component SD576p O O O O
480p O O O O
576i O O O O
480i O O O O
VIDEO 
& S-VIDEO  SD576i x x x x
480i x x x x
PC HD
1080i O x x O
720p O x x O
SD 576p O x x O
480p O x x O
576i O x x O
480i O x x O
PC 16:9 
Mode Ox xO
4:3 
Mode Ox xO
   Overscan : On 
The position of the screen is not moved in PC input mode.
Source Picture Size 
Input Type Mode Normal Zoom1 Zoom2 16:9
HDMI HD
1080i  x x x x
720p x x x x
SD 576p x x x x
480p x x x x
576i x x x x
480i x x x x
PC VESA x x x x
Component HD
1080i O O O O
720p...

 
 
 |  Basic Settings | Connecting the Power | Connecting to video equipment | 
 
 
 
 
 Installing the Projector
 
  Install the projector so that the beam from the projector is p erpendicular to the screen.  
  
Place the projector so that the l ens is at the center of the screen. 
  If the screen is not vertically installed, the picture on the  screen may not be a rectangle. 
Do not install the screen in bright surroundings. If the screen  is too bright, the picture on the screen will not be...

 
 
 
 
 
 
You can adjust the size of image within zoom range by manipulat
ing the 
Zoom Knob. 
Focus the picture on the screen using the Focus Ring.
  
If your product is installed at a  location out of the specified projection 
distance (refer to  Screen Size and Projection Distance ), the focus cannot 
be adjusted correctly.
 
  Leveling with Adjustable Feet  
 
 
 
  For level placing of the projecto r, adjust the Adjustable Feet of the projector.
  
You may adjust the level of the projector up to...

 
 
 
 
 
 
This projector is designed to show images optimally on a 80 ~ 1
20 inch sized screen.
 
 
 
A. Screen 
Z: Throw Distance
Y': Distance from Lens Center to Image Bottom 
  Setting up the PC Environment  - Check the following items before connecting your PC to your  projector.
 
1. Click the right mouse button on the Windows desktop  and click on [Properties].  
 tab will appear.
2. Click on [Settings] tab and se t the  by 
referring to  described in  the display mode table 
supported  by...

 
 
 
5. Click the [OK] button to close the window, and click the [OK] button of the  window to close the 
window. 
The computer may restart automatically.  
 
 
   
6. Shut down the PC and connect to the projector.
   
   
Process might vary depending on  your type of computer or Windows versions.  
(For example, [Properties] appears instead of [Properties (R)]  as shown in 1.)
This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor.
Projected images may...