Samsung Sp D300b User Manual

							 
 
 
 
It is displayed in the form of an ellipse at the top of the projector .
Blue sreen The Blue screen function causes the screen to change to the Blue screen if there is no 
signal input from the external device connected to your projector. 
 
 1) Off
 2) On
InformationYou can check external source signals, picture setup, PC picture adjustment and lamp 
use time.  
 
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
 |  Before Contacting Service Personnel | 
 
 
   
 Installation and Connection 
 
Symptoms   Troubleshooting 
No Power.
zCheck the power cable connections.  
I want to install my projector on 
the ceiling. 
zThe ceiling installation support  is sold separately. Contact your local product 
distributor.  
External Source can not be 
selected.
zBe sure that the connection cabl e(s) (video) is properly connected to the 
proper port. If the devi ce is not connected properly, it can no t be selected. 
 
 
   Menu and Remote Control 
 
 
Symptoms   Troubleshooting 
Remote control does not work.
zCheck whether your remote control is at a right angle and at th e correct 
distance. Remove any obstacles between your remote control and  the product.  
zDirect lighting of 3-way light bulbs or other lighting device on the remote 
sensor of the projector may affect the sensitivity and cause th e remote control 
to malfunction.  
zCheck if the remote control battery is empty.  
zCheck whether the LED indicator  on the top of the projector is turned on. 
I cannot select a menu.
zCheck if the menu is displayed in gray. A gray-colored menu is  unavailable. 
   
 Screen and External Source 
 
Symptoms   Troubleshooting 
Cannot see picture images.
zBe sure that the power cord of the projector is connected. 
zBe sure that the proper input source is selected. 
zCheck that the connectors are  properly connected to the ports a t the back of 
the projector. 
zCheck the Remote Control batteries. 
zBe sure that the ,  settings are not at thei r lower limit. 
Poor color. 
zAdjust the  and .  
Images are not clear.
zAdjust the focus.  
zCheck that the projection distan ce is either too far or too near to the screen. 
Strange noise.
zIf a strange sound continues, contact our  service center.  
The operating LED is lit up.
zRefer to  Corrective Actions Accor ding to LED Indications.  
Lines appear on screen.
zBecause noise may occur when using your PC, adjust the frequenc y of the 
screen. 
No external device screen is displayed.
zCheck the operating status for the external device and check wh ether the 
adjustment items, such as the Br ightness and the Contrast have been changed 
correctly in the  command screen of the Projector menu.  
Only blue screen appears.
zBe sure to properly connect the external devices. Check the con nection cables 
again. 
Screen appears in black and white or 
odd color./ screen  is too dark or 
bright.
zAs mentioned above, check the adjustment items such as the Brig htness, 
Contrast and Color in the menu.  
zIf you want to restore various settings to their factory defaults, run 
						

							 
Default>from the menu.  
 
 
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
 |  Care  and  Maintenance | Contact  SAMSUNG  WORLDWIDE | Other |Authority | 
 
 
 
  
   
To  c lean  the  e xterior  and  len s of  the  projector  
 
C lean  the  projector  u sin g  a s oft  dry  c loth . 
 
Do  not  c lean  the  projector  with  flamm abl e 
s u bs tance s such  a s b enzene , thinner s or  a  w et 
c loth , as  the se  m ay cau se  p roblems. 
 
Do  not  touch  the  projector  with  a  nai l or  any  
other  shar p obj ect s, as  thi s m ay scratch  the  
s ur face .  
   
To  c lean  the  interior  o f  the  projector  
 
F or  c leanin g the  interior  o f  the  projector , ask  your  
Ser vice  Center  or  a  di stri butor .  
 
Contact  your  di stri butor  or  a  Ser vice  Center  if 
du st  or  other  subs tance s are  in side  the  
p ro jector . 
 
 
  
La mp  Replace ment  
   
Caution s on  La mp  Replace ment
The  projector  lamp  is  an  e xp enda ble ite m. F or best  o peratin g perfor mance , re place  the  lamp  accordin g to the  
u sa g e ti m e. Y ou can  view  the  lamp  usa g e ti m e in  the  In for mation  Di spl ay (IN FO  b utton ).
Use  the  reco mmended  lamp w hen re placin g. Lamp sp ecification s are  de fined  in  the  u ser 
						

							  
   
 Contains Mercury, Dispose According to Local, State or Federal Laws 
Lamp Replacement Procedure
The lamp is very hot and operates 
with a high voltage. Allow it to cool 
down for at least 1 hour after 
disconnecting the power cord 
before changing the lamp.The lamp is located at the bottom 
of the product. 
Place the product so that its 
bottom looks upward and remove 
the screws that hold the lamp 
cover in place. 
* When placing the product with 
the bottom upwards, make sure to 
place a soft cloth on the floor to 
prevent scratches.Slide and open the cover in the 
direction of the arrow, as shown in 
the figure.
  
 
Remove the screw indicated in the 
figure.Hold and pull the lamp handle 
slightly, as shown in the figure.  
 
   
Assembling a new lamp is in the reverse order of the disassembly.
 
 
 
| Care and Maintenance| Contact SAMSUNG WORLDWIDE| Other|Authority| 
 
 
 
 
If you have any questions or comments relating to Samsung products, 
please contact a SAMSUNG customer care center.  
 
North America 
U.S.A1-800-SAMSUNG(726-7864) http://www.samsung.com/us
CANADA1-800-SAMSUNG(726-7864) http://www.samsung.com/ca
MEXICO01-800-SAMSUNG(726-7864) http://www.samsung.com/mx
 
 
Latin America 
ARGENTINE0800-333-3733 http://www.samsung.com/ar
BRAZIL0800-124-421 
4004-0000http://www.samsung.com/br
CHILE800-SAMSUNG(726-7864) http://www.samsung.com/cl
Downloaded From projector-manual.com Samsung Manuals 
						

							 
COLOMBIA 01-8000112112  http://www.s ams ung.co m/ co
COS TA  RICA 0-800-507-7267  http://www.s ams ung.co m/l atin
ECUADOR 1-800-10-7267  http://www.s ams ung.co m/l atin
EL  SAL VADOR 800-6225  http://www.s ams ung.co m/l atin
GUA TEMALA 1-800-299-0013  http://www.s ams ung.co m/l atin
H ONDURAS  800-7919267  http://www.s ams ung.co m/l atin
J AMAICA 1-800-234-7267  http://www.s ams ung.co m/l atin
NICARAGUA  00-1800-5077267  http://www.s ams ung.co m/l atin
P ANAMA 800-7267  http://www.s ams ung.co m/l atin
P UER TO  RICO 1-800-682-3180  http://www.s ams ung.co m/l atin
RE P.  DOMINICA 1-800-751-2676  http://www.s ams ung.co m/l atin
T RINIDAD  & TOBAGO 1-800-SAMSUNG (726-7864)  http://www.s ams ung.co m/l atin
V ENE ZUELA 0-800-100-5303  http://www.s ams ung.co m/l atin
 
 
Euro pe 
AUS TRIA
0810 - SAMSUNG  (7267864,  € 0.07/m in)  htt
p://www.s ams ung.co m/ at
B ELGIUM 02 201 2418  http://www.s ams ung.co m/b e
C ZEC H RE PU BLIC 800 - SAMSUNG  (800-726786)  http://www.s ams ung.co m/ cz
DENMAR K8 -  SAMSUNG (7267864) http://www.s ams ung.co m/ dk
EIRE  0818 717 100  http://www.s ams ung.co m/ ie
F INLAND 30 - 6227 515  http://www.s ams ung.co m/f i
F RANCE 3260 
dites SAMSUNG  (€  0,15/ Min) 
0825 08 65 65 ( € 0.15/ Min)  htt
p://www.s ams ung.co m/f r
GERMAN Y
01805 - SAMSUNG  (7267864,  € 0.14/ Min)   htt
p://www.s ams ung.de
H UNGAR Y06-80- SAMSUNG (726-7864)  http://www.s ams ung.co m/ hu
I T ALIA 800-SAMSUNG  (726-7864)  http://www.s ams ung.co m/ it
LU XEM BURG 02 261 03 710  http://www.s ams ung.co m/l u
NE THERLANDS
0900 - SAMSUNG  (7267864,  € 0.10/ Min)  htt
p://www.s ams ung.co m/ nl
NORWA Y3 -  SAMSUNG (7267864)  http://www.s ams ung.co m/ no
P OLAND 0 - 801 - 1
SAMSUNG (172678) 
022 - 607 - 93 - 33  htt
p://www.s ams ung.co m/pl
P OR TUGAL 808 20 - SAMSUNG  (7267864)  http://www.s ams ung.co m/p t
SLO VA KIA 0800-SAMSUNG  (726-7864)  http://www.s ams ung.co m/sk
S P AIN 902 - 1 - SAMSUNG (902 172 678)  http://www.s ams ung.co m/ es
SWEDEN 075 - SAMSUNG  (726 78 64)  http://www.s ams ung.co m/s e
SWI TZERLAND 0848 - SAMSUNG (7267864,  CHF 0.08/m in)  http://www.s ams ung.co m/ ch
U .K 0845  SAMSUNG (7267864) http://www.s ams ung.co m/ uk
 
 
CIS  
Downloaded From projector-manual.com Samsung Manuals 
						

							ESTONIA800-7267 http://www.samsung.ee
LATVIA8000-7267 http://www.samsung.com/lv
LITHUANIA8-800-77777 http://www.samsung.lt
KAZAKHSTAN8-10-800-500-55-500 http://www.samsung.com/kz_ru
KYRGYZSTAN00-800-500-55-500 
RUSSIA8-800-555-55-55 http://www.samsung.ru
TADJIKISTAN 8-10-800-500-55-500 
UKRAINE8-800-502-0000 http://www.samsung.ua
UZBEKISTAN8-10-800-500-55-500 http://www.samsung.com/kz_ru
 
 
Asia Pacific 
AUSTRALIA1300 362 603  http://www.samsung.com/au
CHINA800-810-5858 
400-810-5858 
010-6475 1880 http://www.samsung.com/cn 
HONG KONG:3698 - 4698 http://www.samsung.com/hk
INDIA3030 8282 
1-800-3000-8282  
1800 110011 http://www.samsung.com/in
INDONESIA0800-112-8888 http://www.samsung.com/id
JAPAN0120-327-527 http://www.samsung.com/jp
MALAYSIA1800-88-9999 http://www.samsung.com/my
NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com/nz
PHILIPPINES1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph
SINGAPORE1800-SAMSUNG(726-7864) http://www.samsung.com/sg
THAILAND1800-29-3232, 02-689-3232 http://www.samsung.com/th
TAIWAN0800-329-999 http://www.samsung.com/tw
VIETNAM1 800 588 889 http://www.samsung.com/vn
 
 
Middle East & Africa 
SOUTH AFRICA0860-SAMSUNG(726-7864) http://www.samsung.com/za
TURKEY 444 77 11http://www.samsung.com/tr
U.A.E800-SAMSUNG(726-7864) 
8000-4726 http://www.samsung.com/ae
 
 
 
| Care and Maintenance| Contact SAMSUNG WORLDWIDE| Other|Authority| 
 
 
 
 
 Glossary 
 
 Analog Broadcast
An existing broadcasting signal transmitted by a broadcasting station in accordance with the NTSC standard. 
 
 
Downloaded From projector-manual.com Samsung Manuals 
						

							ANTENNA IN Port 
This is the port for connecting a TV antenna using a coaxial cable. It is generally used to watch public broadcast 
programs. 
 
 
Black Level
Black Level sets the light level of the darkest portion of the video signal to match that of the displays black level 
capability so that users can clearly view dark visuals. If the setting does not match the input signal, the dark screen is 
saturated and may not display properly or the dark screen looks milky-white.
 
Cable Broadcast
Cable Broadcast broadcasts programs via cable instead of radio waves. To view cable broadcasts, you have to 
subscribe to your local cable broadcast service provider and install an additional receiver. 
 
 
Color Standard
A pre-determined default color standard determined by the broadcasting standard of the corresponding country or 
area. 
 
 
Color Temperature
Color temperature is a simplified way to characterize the spectral properties of a light source. A low color temperature 
implies a warmer (more yellow/red) light while a high color temperature implies a colder (more blue) light. 
 
 
COMPOSITE IN Port
A COMPOSITE IN Port is a general video input port (yellow). Both chrominance and luminance are transmitted on the 
same 75-ohm cable. 
 
 
Component Port (Green, Blue, Red)
The Component Port separately transmits the luminance signal. 
 
 
Digital Broadcast
Digital Broadcast is a television broadcasting signal digitized and transmitted according to the United States terrestrial 
digital broadcast specifications, or ATSC. 
 
 
DVD (Digital Versatile Disc)
DVD is a large capacity media disk that can save multimedia content such as video, games, audio applications, etc. 
using MPEG-2 video compression technology on a CD size disc. 
 
 
DLP (Digital Light Processing)
DLP is a digital display technology using a DMD panel developed by TI (Texas Instruments) of the United States. 
 
 
DLP HD2, DC2, DC3
This is a grade of DMD panel. 
 
 
DMD (Digital Micromirror Device)
A DMD panel is an implementation of DLP technology. It consists of microscopic mirrors where each mirror represents 
a pixel. 
 
 
External Input
External Input is connecting video devices such as a VCR, camcorder, DTV receiver, DVD, etc. to the projector as a 
video source. 
 
 
Gamma Mode
Gamma Mode compensates the video signal produced for analog display devices such as a CRT (Cathode Ray Tube) 
so that the video signal can be clearly displayed on a digital display device. 
 
 
HDMI
¢º HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video 
signals using a single cable.
¢º The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth 
Digital Copy Protection) coding feature installed.  
 
 
Overscan
Overscan cuts the edge of the picture when there is unnecessary information, images or noise at the edge of the 
picture. For extremely poor video signals, some unnecessary video signals may be displayed on the screen. 
 
 
RS-232C Port (Service Input Port)
This port is provided for service purposes. This port provides data communication in accordance with the RS-232C 
communication standard. 
 
 
S-Video IN Port 
This is called super video. S-Video is a type of video signal which has the video brightness and color signal separated 
in order to provide a better image quality. 
 
 
Satellite Broadcast
Satellite Broadcast broadcasts programs via satellite so that the program can be viewed in all area in a high visual and 
Downloaded From projector-manual.com Samsung Manuals 
						

							   sound quality. Approximately 100 channels including public broadcast channels are provided. To view satellite 
broadcasts, you have to install an additional receiver. 
 
 
 
 
| Care and Maintenance| Contact SAMSUNG WORLDWIDE| Other|Authority| 
   
 
  
Information in this document is subject to change without notice.