Samsung Sp D400 User Manual

 
  Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
 
 
 
- Connecting using an HDMI/DVI cable 
Connect the [HDMI/DVI IN] terminal on the back of the projector  and the DVI output terminal of the DVD 
player/Cable/Satellite box using a HDMI/DVI cable.
- Connecting using an HDMI cable
Connect the [HDMI/DVI IN] terminal on the back of the projector  and the HDMI output terminal of the DVD 
player/Cable/Satellite box using a HDMI cable.  
When the connection is finished, connect the power of your...

  
 
 
 
Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on the manufacturer.
   Connecting to VCR/Camcorder
 
 
 
Connect [VIDEO IN(yellow)] input port of the projector to the V IDEO (yellow) OUT port of video equipment using the 
video cable. 
- If the video equipment has S-VIDEO OUT port, connect it to [S -VIDEO IN] input port of the projector.
Using the S-VIDEO connection, provides a higher visual quality.
When finishing connecting the de vices, connect the power of...

 
 
Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. 
 
When connections are all completed, connect both power cords of  the projector and the PC.
This product supports plug and play, therefore you do not need to install a driver on your PC.
    Using the Projector   
  Turn on the projector and press the [PC] button to select .  
If PC Mode is not available, check PC video cable is in place. 
 
Turn on the PC and  set the PC Environment...

 
 
  
 
 
 
input terminal.
Downloaded From projector-manual.com Samsung Manuals 

 
 
 |  Input | Picture | Setup | Option | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description  Play/Stop 
Source List  You can select a device connecte d to the projector to display. 
  1) Component   4) PC 
2) S-Video  5) HDMI
3) Video   
Edit NameYou can edit the names of device s connected to the projector. 
  1) VCR  7) DVD Receiver 
2) DVD  8) Game
3) Cable STB   9) Camcorder 
4) HD STB   10) DVD Combo 
5) Satellite STB   11) PC...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Mode Select a screen state which is customized to your projector or  change the screen mode 
as required. 
 
1) Mode
  - Dynamic   
Select this mode for a brighter  and sharper picture than Standa rd Mode. 
  -Standard  
This is the picture mode optimiz ed to the standard broadcast signal. 
  - Monitor1  
This is the brightest picture m ode appropriate for a presentati on.
  -...

  
- 6500K  : This is the color temperature  that is applied for most movie productions 
and enables the most preci se color representation.
  - 8000K  : This color temperature is appr opriate for very bright places and is the 
defaut setting for Dynamic Pictu re Mode. The sharpness and brightness are 
emphasized.
  - 9300K  : The color temperature appropriate to very bright places such  as a shop.
1) Color Temperature   5) R-Offset 
2) R-Gain   6) G-Offset 
3) G-Gain  7) B-Offset 
4) B-Gain    Color...

Film Mode Using this function, you can set  the display mode optimized for playing movies. 
▶  Film Mode is only supported for [ Video], [S-Video] and [Compone nt]. 
 
  1) Off
  2) On
PC Eliminates or reduces noise that  causes unstable screen quality, such as screen 
shaking. If the noise i s not removed using Fine Adjustment, adjust the frequency to the 
maximum and then perform  Fine Adjustment again. 
 
 
 
Only activated in the PC environment.
  1) Auto Adjustment  : Used to adjust frequency and...

 
 
 1) Front-Floor  : Normal Image
  2) Front-Ceiling  : Horizontal/Vertical Reversed Image
  3) Rear-Floor  : Horizontally Reversed Image
  4) Rear-Ceiling  : Vertically Reversed Image
Lamp Mode  Used to set the image  brightness by adjusting the amount of lig ht generated by the 
lamp.  
 
  1) Eco  : Using this function, you can a djust the light level of the lamp so that you 
can comfortably watch pictures on the screen even when watching  under dark 
conditions. It also lowers power consumption and...

 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Language You can select the Language used for the menu screen. 
 
Menu Option You can adjust the settings related to the menu screen. 
 1) Position 
: You can move the location of  the menu to a new position 
(up/down/right/left).
2) Transparency  : Selects the transparency of the menu screen. 
 
 1)Opaque
  2) Low
 3)Medium
 4)High
3) Display Time  : You can set the display time...