Samsung Sp L221 User Manual

Installation and Connection2-8
5.Click the [OK] button to close the window, and click the [OK] button on the  window to close the window. 
The computer may restart automatically. 
6.Shut down the PC and connect to the projector.
 The setup process might vary depending on your type of computer or version of Windows. 
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor.
Projected images may...

2-9Installation and Connection
2-9 Supported Display Modes
PC Timing (D-Sub/HDMI) 
FORMATRESOLUTION
HORIZONTAL 
FREQUENCY
(KHZ)VERTICAL 
FREQUENCY 
(HZ)PIXEL 
FREQUENCY 
(MHZ)
IBM 640 x 350 70Hz 31.469 70.086 25.175
IBM 640 x 480 60Hz 31.469 59.940 25.175
IBM 720 x 400 70Hz 31.469 70.087 28.322
VESA 640 x 480 60Hz 31.469 59.940 25.175
MAC 640 x 480 67Hz 35.000 66.667 30.240
VESA 640 x 480 70Hz 35.000 70.000 28.560
VESA 640 x 480 72Hz 37.861 72.809 31.500
VESA 640 x 480 75Hz 37.500 75.000 31.500
VESA 720...

Installation and Connection2-9
 For the resolutions presented above, if a signal with a resolution lower or higher than 1024x768 is input, it is converted to 
1024x768 by the Scaler chip inside the projector.
When the real resolution (1024x768) of the projector and the PC output resolution are the same, the screen quality is 
optimal.
 
AV Timing (D-Sub)
AV Timing (HDMI)
VESA 1280 x 960 72Hz 72.072 72.000 124.540
VESA 1280 x 960 75Hz 75.231 74.857 130.000
VESA 1280 x 1024 60Hz 63.981 60.020 108.000
VESA...

2-9Installation and Connection
AV Timing (VIDEO/S-VIDEO)
NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
EIA-861Format5 1920 x 1080 Interlaced 59.939 33.716 74.175
EIA-861Format5 1920 x 1080 Interlaced 60.000 33.750 74.250
EIA-861Format17,18 720 x 576 Progressive 50.000 31.250 27.000
EIA-861Format19 1280 x 720 Progressive 50.000 37.500 74.250
EIA-861Format20 1920 x 1080 Interlaced 50.000 28.125 74.250
FORMATRESOLUTIONSCAN
HORIZONTAL 
FREQUENCY
(KHZ)VERTICAL 
FREQUENCY 
(HZ)PIXEL 
FREQUENCY 
(MHZ)...

Installation and Connection2-10
2-10 Connecting the Power
1.Plug the power cord into the power terminal on the rear side of the projector.
Downloaded From projector-manual.com Samsung Manuals 

2-11Installation and Connection
2-11 Connecting with a PC 
1.Connect the [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2.Plug in the power cords of the projector and the PC.
3.Connect the [PC/DVI AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. 
 This product supports plug and play. If you use Windows XP, you do not need to set up the driver on your PC. 
Using the Projector 
1.Turn on the...

Installation and Connection2-12
2-12 Connecting a PC using an HDMI/DVI cable
Make sure that your PC and projector are turned off.
1.Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI 
cable (Not supplied).
- If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).
- For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-9. 
2.If you connected using a HDMI/DVI cable,...

2-13Installation and Connection
2-13 Connecting an External Monitor
You can view an image on both your projector and a separate monitor at the same time.
Make sure that your PC and projector are turned off.
1.Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable.
2.Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable.
- When connecting a monitor using the [PC OUT] function, make sure to connect your...

Installation and Connection2-14
2-14 Connecting an HDMI-Compatible Device
First, Make sure that the AV device and your projector are turned off.
1.Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output 
device using an HDMI/DVI or HDMI/HDMI cable.
- If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.
- For supported input signal formats, resolutions, and frequencies, see AV...

2-15Installation and Connection
2-15 Connecting an AV device using a D-Sub cable
First, Make sure that the AV device and your projector are turned off.
1.Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-9. 
2.Connect the [PC/DVI AUDIO IN] terminal at the back of the projector to the Audio out terminal of your AV device using an 
audio...