Samsung Syncmaster 152n Quick Start Guide

							User’s Manual
Setup
Windows XP/2000
1. Insert CD into the CD-ROM drive. 
2. Click  Windows XP/2000 Driver .
3. Choose your monitor model in the model list, then click the  OK button.
4. Click the  Install button in the  Warning window.
5. If you can see following  Message window, then click the  Continue Anyway
 button. Then 
click OK  button.
This monitor driver is under certifying MS logo,and this installation do\
nt damage your  
system.The certified driver will be posted on Samsung Monitor Homepage 
http://www.samsung-monitor.com/
6. Monitor driver installation is completed. 
 
						

							User’s Manual
Setup
When prompted by the operating system for the monitor driver, insert the\
 CD-ROM  
included with this monitor. Driver installation is slightly different fr\
om one operating 
system to another. Follow the directions as appropriate for the operatin\
g system you 
have. 
Prepare a blank disk and download the driver program file at the Interne\
t web site shown here.
? Internet web site : http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor/  (USA)
http://www.sec.co.kr/monitor/  (Korea)
http://www.samsungmonitor.com.cn/  (China)
Microsoft® Windows® XP Operating System
1. Insert CD into the CD -ROM driver. 
2. Click  Start — >  Control Panel  then click the  Appearance and Themes  Icon. 
   
3. Click  Display  icon and choose the  Settings tab then click  Advanced...
 
						

							User’s Manual
Setup
   
4. Click the  Properties  button on the  Monitor tab and select  Driver tab. 
   
5. Click  Update Driver..  and select Install from a list or..  then click Next button. 
   
6. Select  Dont search ,I will..  then click Next and then click  Have disk. 
   
7. Click the  Browse
 button then choose A:(D:\Driver) and choose your monitor model in t\
he model 
list and click the  Next button. 
 
						

							User’s Manual
Setup
   
8. If you can see following  Message window, then click the  Continue Anyway
 button. Then click 
OK  button.
This monitor driver is under certifying MS logo,and this installation do\
nt damage your system.The  
certified driver will be posted on Samsung Monitor Homepage 
http://www.samsung-monitor.com/
9. Click the  Close button then click  OK button continually.
 
						

							User’s Manual
Setup
   
10. Monitor driver installation is completed. 
Microsoft® Windows® 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1. Choose  OK button on the  Insert disk window. 
2. Click the  Browse button on the  File Needed window. 
3. Choose A:(D:\Driver) then click the Open button and then click  OK button. 
How to install
1. Click  Start , Setting  , Control Panel . 
2. Double click the  Display Icon. 
3. Choose the  Settings tab and then click  Advanced... 
4. Choose  Monitor. 
5. Click  Driver  and then click on  Update Driver.. then click on the Next button. 
6. Choose  Display a list of the known drivers for this device so that I can choose\
 a specific 
driver  then click  Next and then click  Have disk. 
7. Click the  Browse button then choose A:(D:\Driver). 
8. Click the  Open button, then click  OK  button. 
9. Choose your monitor model and click the  Next button then click  Next button. 
10. Click the  Finish button then the  Close button. 
If you can see the  Digital Signature Not Found  window then click the Yesbutton. And 
click the  Finish button then the  Close button.
Case1:
If the Properties button is inactive, it means your monitor is properl\
y configured.  
Please stop installation 
Case2: If the Properties button is active, click the Properties button then\
 follow next steps 
continually.
 
						

							User’s Manual
Setup
8.Click the Have Disk button 
9.Specify A:\(D:\driver) then click  OK button. 
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK. 
11. Continue choosing  Close button and  OK button until you close the Display Properties 
dialogue box.  
(You can get some other screen for warning message or others, then clic\
k the appreciate 
option for your monitor.) 
8.Click the Have Disk button 
Microsoft®  Windows® Millennium Operating System
1. Click  Start , Setting  , Control Panel . 
2. Double click  Display icon. 
3. Select the  Settings tab and click  Advanced Properties  button. 
4. Select the  Monitor tab. 
5. Click the  Change button in the  Monitor Type area. 
6. Choose  Specify the location of the driver . 
7. Choose  Display a list of all the driver in a specific location..  then click Next button. 
 
						

							Microsoft® Windows® NT Operating System
1. Click  Start, Settings , Control Panel , and then double -click  Display  icon. 
2. In Display Registration Information window, click Settings Tab and then \
click  All Display 
Modes . 
3. Select a mode that you wish to use (Resolution, Number of colors and Ve\
rtical frequency) and  
then click  OK. 
4. Click  Apply  button if you see the screen working normally after clicking Test. If t\
he screen is 
not normal, change to a different mode (lower mode of resolution, color\
s or frequency). 
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a typ\
e of system setting file.  1. Press Enter at the first and the second screen after executing the X86Co\
nfig file. 
2. The third screen is for  setting your mouse. 
3. Set a mouse for your computer. 
4. The next screen is for  selecting a keyboard . 
5. Set a Keyboard for your computer. 
6. The next screen is for  setting your monitor . 
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency 
directly.) 
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.) 
9. Enter the  model name of your monitor . This information will not affect the actual execution 
of X-Window. 
10. You have  finished setting up your monitor. 
Execute  X-Window after setting other requested hardware. 
User’s Manual
Setup
 
						

							User’s Manual 
Setup
Removing the base 
 
1 Turn off your monitor and unplug its power cord. 
2 Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 
3 Remove the four screws and then remove the Stand from the LCD monitor. 
Installing VESA compliant mounting
SyncMaster  151S/151B/151BM/151V/151Q
 
						

							User’s Manual 
Setup
Attaching a base 
NOTE : This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad. 
1 Rear cover mounting pad 
2 Mounting interface pad 
 
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with 
the four screws that came with the arm-type base, wall mount hanger or other base.  
Installing VESA compliant mounting
 
						

							User’s Manual 
Setup
Installing VESA compliant mounting
Removing the base
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove the four screws and then remove the Stand from the LCD monitor.  
SyncMaster  151N/150N/152N/153N