Samsung Syncmaster 2033hd User Manual

							Using the Product3-5
 If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
 
Channel
AUDIO TYPE DUAL 1 / 2 DUAL 1 / 2
A2 
StereoMono MONO Automatic change
Stereo
STEREO  MONOAutomatic change
Dual
DUAL 1 DUAL 2DUAL 1
NICAM 
StereoMono MONO Automatic change
Stereo
MONO STEREOAutomatic change
Dual
MONO DUAL 1
 DUAL 2 DUAL 1
 
						

							3-5Using the Product
MENUDESCRIPTION
Country Select the country in which the product is being used before you use the Auto Store feature. If you do 
not see your country in the list, select Others.
• 
You can change the country for analogue channels. 
• 
You can change the country for digital channels.
 The PIN number input screen appears. Enter your 4 digit PIN number. 
Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). 
Automatically allocated programme numbers may not correspond to actual or desired programme 
numbers.
 If a channel is locked using the  function, the PIN input window appears. 
• 
Antenna source to memorize.

• 
Digital and Analogue channels.
• 
Digital channels.
• 
Analogue channels.
When selecting Cable → Digital & Analogue or Cable → Digital : Provide a value to scan for 
cable channels.
• 
Full / Network / Quick
 
Quick
• 
Displays the network identification code.
• 
Displays the frequency for the channel. (Differs in each country)
• 
Displays available modulation values.
• 
Displays available symbol rates.
Scans for all channels with active broadcast stations and stores them in the TV`s 
memory.
 
 
						

							Using the Product3-5
Manual Store You can scan the frequency ranges available on your television in your area and store all the chan-
nels found manually. 
• 
Manual store for digital channels. 
• 
Set the Channel number using the ▲ ,▼ or number (0~9) buttons
• 
Set the frequency using the number buttons.
• 
Set the bandwidth using the ▲ ,▼ or number (0~9) buttons.
 •  is only available in DTV mode.
• When it has finished, channels are updated in the channel list. 
 
• 
Manual store for analogue channel.
•  ( number to be assigned to a channel)
Sets the programme number using the ▲ ,▼ or number (0~9) buttons
• 
Adjusts repeatedly until the colour is of the best quality. Sets the colour system value using 
the ▲ or ▼ button.
• ---
• 
Adjusts repeatedly until the sound is of the best quality. Sets the sound system value using 
the ▲ or ▼ button.
• ---
•  (When you know the number of the channel to be stored)
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose: 
Whether or not to store each of the channels found. The Programme number of each stored 
channel which you wish to identify
•  (Air channel mode) 
You can select a channel by entering the assigned number to each air broadcasting 
station in this mode.
•  (Cable channel mode) 
You can select a channel by entering the assigned number for each cable channel in this 
mode.
•  (When you do not know the channel numbers) 
Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first 
channel or the channel that you selected is received on your screen.
•  (When you store the channel and associated programme number) 
Its used to restore the number user inputs. Set to OK by pressing the [ ] button. 
Cable Search Option 
(depending on the 
country)Using this function, you can manually add the channel range to be scanned by full search mode of 
the Auto Store function.
• 
Displays the frequency for the channel.
• 
Displays available modulation values.
• 
Displays available symbol rates.
MENUDESCRIPTION
 
						

							3-5Using the Product
Now & Next Guide / 
Full Guide / Default 
GuideThe EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme 
entries may appear blank or out of date as a result of the information broadcast on a given channel. 
The display will dynamically update as soon as new information becomes available.
 You can also display the guide menu simply by pressing the [GUIDE] button. (To configure the 
, refer to the descriptions.).
 
• 
For the six channels indicated in the left-hand column, displays the Current programme and the 
Next programme information.
• 
Displays the programme information as time ordered One hour segments. Two hours of 
programme information is displayed which may be scrolled forwards or backwards in time.
 • The programme title is on the upper part of the screen center. Please click on INFO 
button for the detailed information. Channel Number, Running Time, Status Bar, 
Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, 
Languages of Subtitle or Teletext, and brief summary of the highlighted programme are 
included on the detailed information. 
• “... “ will be appeared if the summary is long.
• Six channels are displayed. To scroll between channels, move to a channel using the ▲ 
or ▼ button. To display page by page, use the   or   button.
 
• 
You can decide whether to display either the  or the  when the 
GUIDE button on the remote control is pressed.
•  / 
MENUDESCRIPTION
 
						

							Using the Product3-5
Channel List Using this menu, you can add / delete or set favorite channels and use the program guide for digital 
broadcasts.
You can select these options by simply pressing the [CH LIST] button on the remote control.
•  - Shows all currently available channels.
•  - Shows all added channels.
•  - Shows all favorite channel.
 Press the [TOOLS] button to display the  menu. You can also set the add to (or delete 
from) Favourite by selecting [Tools] →  (or ).
 To select the favorites channels you have set up, press the [FAV.CH] button on the remote 
control.
 
•  - Shows all current reserved programs.
 • Select a channel in the ,  or  screen by 
pressing the ▲ / ▼ buttons, and pressing the [ ] button. Then you can watch the 
selected channel.
• Using the Colour buttons with the 
• Green (): Enlarges or shrinks a channel number.
• Yellow (): Selects multiple channel lists. You can perform the add / delete or 
add to Favorite / delete from Favorite function for multiple channels at the same time. 
Select the required channels and press the yellow button to set all the selected 
channels at the same time. The check mark appears to the left of the selected 
channels.
• [TOOLS] (): Displays the  (or ),  (or 
), , ,  (or 
) and  menus (The Options menus may differ 
depending on the situation.)
• Channel Status Display Icons
• : An analogue channel.
• : A channel set as a .
• : A channel selected by pressing the yellow button.
• : A Program currently being broadcast.
• : A locked channel.
• : A reserved program. 
Channel Mode
When press the     button, Channels will be switched within the selected channel list.
• 
Channels will be switched within the memorized channel list.
• 
Channels will be switched within the favourite channel list.
Fine Tune Use fine tuning to manually adjust a particular channel for optimal reception.
 
• If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk 
‘*’ on the right-hand side of 
the channel number in the channel banner.
• To reset the fine tuning setting, press the 
▼ button to select , then press the [ ] button.
• Only Analogue TV channels can be fine tuned.
 
MENUDESCRIPTION
 
						

							3-5Using the Product
Setup
MENUDESCRIPTION
Plug & Play This brings up the menu items that appeared when you first plugged in the TV.
Language The language chosen affects only the language of the OSD. 
Time• 
 
• The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
• Setting the clock is necessary in order to use the various timer features of the TV.
 
• 
 You can set up the current time manually or automatically.
•  - 
 •Depending on the broadcast station and signal, the auto time may not be set correctly. If this 
occurs, set the time manually.
•The Antenna or cable must be connected in order to set the time automatically.
 
• 
You can set the current time manually.
 •This function is only available when  is set to .
•You can set the month, day, year, hour and minute directly by pressing the number buttons on the 
remote control.
 
Time• 
The sleep timer automatically shuts off the TV after a preset time .
•  -  -  -  -  -  - 
 Press the [TOOLS] button to display the  menu. You can also set the sleep timer by 
selecting  → .
 To cancel the  function, select . 
 
						

							Using the Product3-5
Time• 
Three different on / off timer settings can be made. You must set the clock first.
• 
Set the , , , and .
(To activate the timer with the setting you’e chosen, set to Activate.)
• 
Set the , , , and .
(To activate the timer with the setting you’e chosen, set to Activate.)
• 
Set the desired volume level.
• 
View antenna type. ( or ).
• 
Select the desired channel.
• 
Select , , , ,  or .
 • When  is selected, press the ► button to select the desired day of the week. 
Press the [ ] button over the desired day and the ( ) mark will appear.
•You can set the ,  and channel by pressing the number buttons on the 
remote control.
•Auto Power Off
When you set the timer On, the television will eventually turn off if no controls are operated for 3 
hours after the TV was turned on by the timer. This function is only available in timer On mode 
and prevents overheating, which may occur if a TV is on for too long time.
 
Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic 
gaming experience by selecting game menu.
•  - 
 
• Restrictions on game mode (Caution)
•To disconnect the game console and connect another external device, set  
to  in the setup menu. If you display the TV menu in , the screen 
shakes slightly.
• If  is  :
•Picture mode is automatically changed to  and cannot be changed.
•Sound mode is automatically changed to  and cannot be changed. Adjust the 
sound using the equalizer.
•  is not available in regular  and  mode.
• If the picture is poor when external device is connected to TV, check if  is . Set 
 to  and connect external devices.
 
MENUDESCRIPTION
 
						

							3-5Using the Product
Child Lock  This feature allows you to prevent unauthorized users, such as children, from watching unsuitable 
programme by muting out video and audio.
• - 
 
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN 
number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting 

 from the menu.
• You can lock some channels in 
.
• 
 is available only in TV mode. 
Change PIN You can change your personal ID number that is required to set up the TV.
 
• Before the setup screen appears, the PIN number input screen appears. Enter your 4digit PIN 
number.
• The default PIN number of a new TV set is 0-0-0-0.
• If you forget the PIN code, press the remote control buttons in the following sequence, which resets 
the PIN to 0-0-0-0: [POWER] (Off) 
→ [MUTE] → 8 → 2 → 4 → [POWER] (On). 
Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable 
programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user.
• 
Press to unlock all TV ratings.
• 
Press to lock all TV ratings.
 
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN 
number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN 
from the menu.
• When the parental ratings are set, the   symbol is displayed.
 
Subtitle You can activate and deactivate the subtitles. Use this menu to set the .
 under the menu is the basic subtitle and  is the subtitle for a hearing-
impaired person.
• 
Switches subtitles on or off. 
• 
Sets the subtitle mode. 
•  / 
• 
Set the subtitle language.
 
• If the programme you are watching does not support the  function,  
automatically activates even though <
Hard of hearing> mode is selected.
• English is the default in cases where the selected language is unavailable in the broadcast.
• You can select these options simply by pressing the [SUBT]. button on the remote control.
 
Teletext Language You can set the Teletext language by selecting the language type.
 English is the default in cases where the selected language is unavailable in the broadcast. 
MENUDESCRIPTION
 
						

							Using the Product3-5
Preference  /  /  / /  /
Using this feature, users can select one of the languages. The language selected here is the default 
when the user selects a channel.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Lan-
guage of the Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a 
list of languages supported by the current channel and the selection is highlighted.
If you change this language setting, the new selection is only valid for the current channel. The 
changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Lan-
guage, or the Primary Teletext Language of the Preference menu.
Digital Text If the programme is broadcast with digital text, this feature is enabled. 
• - (UK only)
 
• MHEG (Multimedia and Hypermedia Information Coding Experts Group)
• An International standard for data encoding systems used in multimedia and hypermedia. This is at a 
higher level than the MPEG system which includes data-linking hypermedia such as still images, 
character service, animation, graphic and video files as well as multimedia data. MHEG is user 
runtime interaction technology and is being applied to various fields including VOD (Video-On-
Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, 
digital libraries and network games. 
 
Light Level Light Level is to automatically detect distribution of inputted visual signal and adjust to create opti-
mum brightness.
Melody  A melody sound can be set to come on when the monitor is powered On or Off. 
•  -  -  - 
 The  does not play
• When no sound is output from the TV because the [MUTE] button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum with the 
volume [-] button
• When the TV is turned off by  function
 
Energy Saving  This feature adjusts the brightness of the TV in order to reduce power consumption. When watching 
TV at night, set the  mode option to  to reduce eye fatigue as well as power 
consumption. 
 Press the [TOOLS] button to display the  menu. You can also set the  
option by selecting  → .
•  : Turns off the energy saving function.
•  : Sets the TV to low energy saving mode.
•  : Sets the TV to medium energy saving mode.
•  : Sets the TV to high energy saving mode.
•  : Automatically adjusts the brightness of the TV screen in accordance with the scenes. 
Common Interface• 
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
• 
This contains information on CAM inserted in the CI slot and displays it.
The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the 
TV is ON or OFF.
MENUDESCRIPTION
 
						

							3-5Using the Product
Input
Anynet+ (HDMI-CEC)
What is ?
 is a function that enables you to control all connected Samsung devices that
support  with your Samsung TV‘s remote. The  system can be used only
with Samsung devices that have the  feature. To be sure your Samsung device
has this feature, check if there is an  logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding  device using an HDMI 
cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding  device using an 
HDMI cable. 
MENUDESCRIPTION
Source List   Use to select ,  or an external input source connected to the Monitor.Use to select the 
screen of your choice.
You can use the [SOURCE] button on the remote control.
•  -  -  -  -  -  - 
Edit Name   Name the input device connected to the input jacks to make your input source selection easier.
 -  -  -  -  -  - < Game> - -  -  -  -  -  -  -  -