Samsung SyncMaster 400DX-2 User Manual

Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Vertical MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  → ENTER →  →   →  → ENTER →  →   ,   → ENTER
Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  → ENTER →  →   →  →  → ENTER →  →   ,   → ENTER
Set the time interval for performing the horizontal or vertical movement,...

1.
Off
2. On
Mode MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  →   → ENTER →  →   → ENTER →  →   ,   → ENTER
You can change the 
Safety Screen Type.
1. Scroll
2. Bar
3. Eraser
Period MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  →   → ENTER →  →   →   → ENTER →  →   ,   → ENTER
Use this function to set the execution period for each mode set in the timer.
Time MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  →   → ENTER →  →   →   →   → ENTER →  →   ,...

•
Mode- Bar, Eraser : 10~50 sec
Scroll MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  →   →   → ENTER → 
This function helps to remove after-images on the screen by moving all the pixels on the LCD
according to a pattern.
Use 
this 
function when there are remaining after-images or symbols on the screen, especially
when you displayed a still image on the screen for a long time.
Bar MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  →   →   →   →ENTER → 
This  function...

→   ,   → ENTER
Select the brightness of the grey for the screen background.
1. Off
2. Light
3. Dark
Resolution Select  MENU  →    →   →   → 
ENTER  →    →  →  →  →    →    →    →    →    →ENTER  →
→   ,   → ENTER
When  the 
picture  is  not  displayed  properly  on  the  screen  when  setting  the  graphics  card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture
displayed on the...

Power On Adjustment 
MENU  →    →   →   → 
ENTER  →    →  →  →  →    →    →    →    →    → → 
ENTER  → →   ,   → ENTER
Adjusts the Power On time for the screen.
OSD Rotation  MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   →   → →  →  →  →  →
ENTER →  →   ,   → ENTER
OSD Rotate
1. Landscape
2. Portrait
Reset Reverts the 
product  settings  to  factory  defaults.  The  Reset  function  is  only  available  when
PC /  DVI is being used.
MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   →   → →  →...

→  ,  → ENTER
 Note
Available in  PC mode only  Note
The Reset function is not available when  Video Wall is On.
Color Reset  MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   →   → →  →  → ENTER
→  →  → ENTER → 
→  ,   → ENTER
Multi Control
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The  BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Multi Control  Assigns an individual ID to the SET.
MENU → 
 →  →  →   → ENTER...

→   ,   → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use 
to 
select  the  transmitter  functions  of  the  individual  SET.  Only  a  SET  where  the  ID
corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The 

BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.  Note
• The  remote 

control can be used to select  MagicInfo. However, it is...

• Press ESC to directly go to the MagicInfo Window screen.
•
To setup 
MagicInfo on a Windows screen, a keyboard and mouse are required.
• To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation.
• For pivoted LCD Displays, ticker transparency is not supported.
• For  pivoted  LCD  Displays,  a  screen  resolution  of  up  to  720*480(SD)  is  supported  for movies.
• For drive D:, EWF is not applied.
• To save...

In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop
to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation.
3. Select Language - step 3
When using multiple languages, you can choose and set a specific language among them.
4. Select Screen Type - step 4Adjusting the LCD Display 

You can select which rotation type will be applied to your device.
5. Setup Information
Shows the settings that have been selected by the user.
 Note
If  the  MagicInfo   
icon is not displayed on the notification area, double click the  MagicInfo  icon
on the window desktop. The icon will appear. Adjusting the LCD Display