Samsung Syncmaster Ex1920 User Manual

							More Information6-49
6-49 Specifications
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEE2020N/E2020NX
Panel
Size 20 inches (50 cm)
Display area 442.8 mm (H) x 249.08 mm (V) 
Pixel Pitch 0.2768 mm (H) x 0.2768 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1600 x 900 @60Hz
Maximum resolution 1600 x 900 @60Hz
Input Signal, TerminatedRGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 150 MHz  (Analog)
Power SupplyThis product supports 100 – 240 V. Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)477.1 x 289.05 x 62 mm ( 18.8 x 11.4 x 2.4 inches) (Without Stand)
477.1 x 368.95 x 179.8 mm ( 18.8 x 14.5 x 7.1 inches) / 3.95 kg ( 8.7  Ibs) (With 
Stand)
Environmen-
tal consider-
ationsOperatingTemperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
StorageTemperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°~20°
 
						

							More Information6-50
6-50 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your 
computer. Use the software utility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Indicator On Blinking Off
Power Consumption 25 W 0.3 watts 0.3 watts
 
						

							More Information6-51
6-51 Specifications
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEE2220/E2220X
Panel
Size 21.5 inches (54 cm)
Display area 476.64 mm (H) x 268.11 mm (V) 
Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1920 x 1080 @60Hz
Maximum resolution 1920 x 1080 @60Hz
Input Signal, TerminatedRGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 162 MHz  (Analog, Digital)
Power SupplyThis product supports 100 – 240 V. Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
DVI-D to DVI-D connector,  Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)513.2 x 309.6 x 61.9 mm ( 20.2 x 12.2 x2.4 inches) (Without Stand)
513.2 x 388.5 x 200 mm ( 20.2 x 15.3 x 7.9 inches) / 4.1 kg ( 9  Ibs) (With Stand)
Environmen-
tal consider-
ationsOperatingTemperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
StorageTemperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°~20°
 
						

							More Information6-52
6-52 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your 
computer. Use the software utility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Indicator On Blinking Off
Power Consumption 45 WLess than 
0.3 wattsLess than 
0.3 watts
 
						

							More Information6-53
6-53 Specifications
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEE2220N/E2220NX
Panel
Size 21.5 inches (54 cm)
Display area 476.64 mm (H) x 268.11 mm (V) 
Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1920 x 1080 @60Hz
Maximum resolution 1920 x 1080 @60Hz
Input Signal, TerminatedRGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 162 MHz  (Analog)
Power SupplyThis product supports 100 – 240 V. Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)513.2 x 309.6 x 61.9 mm ( 20.2 x 12.2 x 2.4 inches) (Without Stand)
513.2 x 388.5 x 200 mm ( 20.2 x 15.3 x 7.9 inches) / 4.1 kg ( 9  Ibs) (With Stand)
Environmen-
tal consider-
ationsOperatingTemperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
StorageTemperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°~20°
 
						

							More Information6-54
6-54 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your 
computer. Use the software utility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Indicator On Blinking Off
Power Consumption 45 WLess than 
0.3 wattsLess than 
0.3 watts
 
						

							More Information6-55
6-55 Specifications
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEE2220NW
Panel
Size 22 inches (55 cm)
Display area 473.76 mm (H) x 296.1 mm (V) 
Pixel Pitch 0.282 mm (H) x 0.282 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1680 x 1050 @60Hz
Maximum resolution 1680 x 1050 @60Hz
Input Signal, TerminatedRGB Analog
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 146 MHz  (Analog)
Power SupplyThis product supports 100 – 240 V. Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)510.7 x 337.75 x 62 mm ( 20.1 x 13.3 x 2.4 inches) (Without Stand)
510.7 x 418.7 x 200 mm ( 20.1 x 16.5 x 7.9 inches) / 4.55 kg ( 10.0  Ibs) (With 
Stand)
Environmen-
tal consider-
ationsOperatingTemperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
StorageTemperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°~20°
 
						

							More Information6-56
6-56 Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a 
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a 
different color to indicate that the product is in power saving mode. 
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key 
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides 
the power saving function.
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your 
computer. Use the software utility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Indicator On Blinking Off
Power Consumption 45 WLess than 
0.3 wattsLess than 
0.3 watts
 
						

							More Information6-57
6-57 Specifications
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEE2220W /E2220WX
Panel
Size 22 inches (55 cm)
Display area 473.76 mm (H) x 296.1 mm (V) 
Pixel Pitch 0.282 mm (H) x 0.282 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1680 x 1050 @60Hz
Maximum resolution 1680 x 1050 @60Hz
Input Signal, TerminatedRGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 146 MHz  (Analog, Digital)
Power SupplyThis product supports 100 – 240 V. Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable15pin-to-15pin D-sub cable,  Detachable
DVI-D to DVI-D connector,  Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)510.7 x 337.75 x 62 mm ( 20.1 x 13.3 x 2.4 inches) (Without Stand)
510.7 x 418.7 x 200 mm ( 20.1 x 16.5 x 7.9 inches) / 4.55 kg ( 10.0  Ibs) (With 
Stand)
Environmen-
tal consider-
ationsOperatingTemperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
StorageTemperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt -1°~20°
 
						

							More Information6-58
6-58 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your 
computer. Use the software utility installed on your computer to set up this feature.
 If there is no power cut-off switch, the power consumption is 0 only when the power cord is disconnected.
 
STATENORMAL OPERATIONPOWER SAVING MODEPOWER OFF
Power Indicator On Blinking Off
Power Consumption 45 WLess than 
0.3 wattsLess than 
0.3 watts