Samsung Wb 2200 F Manual

							Camera layout
Basic functions  20
Using Viewfinder/Eye-cup/Diopter adjustment dial
Diopter adjustment dial
Eye-cup
Viewfinder 
•	Viewfinder: You can look through the device 
while capturing a photo or adjusting focus.
•	Eye-cup: The eye-cup is attached to the 
viewfinder to prevent your eyes from touching it. 
•	Diopter adjustment dial: It is possible to adjust 
the viewfinder appropriate for the eyesight 
of user. Pull out, and then use the diopter 
adjustment dial. If the image is not shown 
clearly through the viewfinder, move the diopter 
(eyesight) adjustment dial in the left/right 
direction to have a clear view.
Using the EVF button
Whenever you press [EVF], the camera switches between the display and the 
viewfinder.     
						

							Camera layout
Basic functions  21
Using the camera grips
Capture a photo stably and conveniently with the horizontal or vertical grip in a 
variety of shooting environments.
Shooting horizontally
Shooting vertically  
						

							Camera layout
Basic functions  22
Attaching a lens cap
Attach a lens cap with a lens cap strap to protect the camera lens.
Attaching a strap
Attach a strap to carry your camera conveniently. 
						

							Basic functions  23
Inserting the battery and memory card
Rechargeable battery
Make sure that the Samsung logo is facing 
to the cover, and then insert the battery.
Removing the battery
Slide the lock left to release the 
battery.
Rechargeable battery
Battery lock
Inserting the battery
Learn how to insert the battery into the camera.
Turn and hold in the 1 direction, and then 
push and open in the 2  direction.  
						

							Inserting the battery and memory card
Basic functions  24
Removing the memory card
Push the card gently until it disengages 
from the camera, and then pull it out of the 
slot.
Using the memory card adapter
To use micro memory cards with this product, a PC, or a 
memory card reader, insert the card into an adapter.
You can use the internal memory for temporary storage if a memory card is not 
inserted.
Memory card
Inserting the memory card
Learn how to insert the memory card into the camera.
Insert a memory card with the gold-
colored contacts facing up.
Memory card  
						

							Basic functions  25
Charging the battery and turning on your camera
Turning on your camera
Press [X] to turn your camera on or off.
•	The initial setup screen appears when you turn on the camera for the first time.  
(p. 26)
Turning on your camera in Playback mode
Press [P]. The camera turns on and immediately accesses Playback mode.
If you turn on your camera by pressing and holding [P] the camera does not emit 
any sounds.
Charging the battery
Before you use the camera for the first time, you must charge the battery. Plug the 
small end of the USB cable into your camera, and then plug the other end of the 
USB cable into the AC adapter.
Status lamp
•	Red light on: Charging
•	Red light off: Fully charged
Use only the AC adapter and USB cable supplied with your camera.  
						

							Basic functions  26
1 Press [c] to select Time Zone, and then press [t] or [o].
2 Press [F/t] to select a time zone, and then press [o].
CancelSet
Home
London
3 Press [c] to select Date/Time Set, and then press [t] or [o].
Cancel Set
Date/Time Set
Year
Month DayHour Min DST
4 Press [F/t] to select an item.
5 Press [D/c] to set the date, time, and daylight-saving time, and 
then press [
o].
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. The default language is preset for the country or region where the camera 
is sold. You can change the language as desired by selecting Language.  
						

							Performing the initial setup
Basic functions  27
6 Press [c] to select Date Type, and then press [t] or [o].
7 Press [D/c] to select a date type, and then press [o].
Date Type
Back Set
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
8 Press [c] to select Time Type, and then press [t] or [o].
9 Press [D/c] to select a time type, and then press [o].
10 Press [r] to finish the initial setup. 
The screen may differ depending on the language selected.  
						

							Basic functions  28
Learning icons
All the details shown on the view finder will appear identically on the display.
The camera displays icons for the mode and options you set. The icons flash yellow for a while if you change options.
IconDescription
Auto focus frame
Camera shake
Zoom indicator
Photo resolution when the Intelli 
zoom is on
Zoom ratio
Histogram
1 Shooting information
IconDescription
Aperture value
Shutter speed
Available recording time
Exposure value
Available number of photos
Memory card inserted
•	: Fully charged 
•	 : Partially charged
•	: Empty (Recharge)
Current date
Current time
1     
						

							Learning icons
Basic functions  29
2 Shooting options (left)
IconDescription
Shooting mode
White Balance
Image adjustment  
(Sharpness , Contrast , and Saturation)
Focus Area
Focus
Face Detection
AutoShare on
3 Shooting options (right)
Icon Description
ISO sensitivity
Video resolution
Flash
Frame Rate (per second)
Photo resolution
Zoom Mute
Intelli zoom on
Optical Image Stabilization (OIS)
Metering
Timer
Continuous mode
Precapture mode
Bracket mode
2
3