Sangean Ats606ap Shortwave Radio Owners Manual

BAND          FREQUENCY           PROGRAM TYPE
   FM           87.5-108                 MHz        Standard FM  
   LW           153-513                  kHz          Longwave 
   MW          520-1710                kHz          Standard AM
   SW           1.711-29.999         MHz        SW/13 sub-bandsBAND SELECTIONThere are four band selector buttons located just 
beneath the LCD display.20ATSLWMWSWATSATSMETER-STANDBY-TIMER 

1.Turn radio on by pressing  POWER/SLEEP  
   button. Display will show last band and fre-
   quency selected.
  
2.By pressing any one of the four band selector 
   buttons, last frequency used within that band 
   will appear.21LWMWSW-STANDBY-TOMER
SWM
FWM
POWER/
   SLEEPAuto tuning system 

If you select SW, pressing SW/METER button again 
will display a flashing  m  indicating any meter 
band may now be selected. For example press but-
ton 6/41m, display will show lowest frequency of 
41 meter.i.e 7.100 Mhz.Note:22SWMETERTIMERMM
SW120m90m75m60m49m41m31m25m21m
1 2 3 
4 5 6 
7 8 9
SWM 

AUTO TUNING SYSTEMTUNING POWER/
   SLEEPFINE-STANDBY-TIMERSWMETERTUNINGMANUAL/AUTODISPLAYTIME SETFREQM.SCAN 
MWLWFM
P1/P2
120m90m75m60m49m41m31m25m21m19m16m13m11m
1 2 3 4 5 6 7 8 0C9ENTERMATS606A
HWS
FM/LW/MW/SW SYNTHESIZED RECEIVER 
Locate the band you want to listen to in the following chart and adjust the antenna as indicated.TUNING MODEADJUSTING THE ANTENNA BAND            
FREQUENCY RANGE            ANTENNA TYPES           ILLUSTRATION...

 1 2 3                                                                  
                                                       Extend antenna all the 
FM            87.50-108 MHz         way and rotate it for best 
                                                       reception.You may select five different tuning methods to choose the frequency and station broadcasting you prefer.
.Direct Tuning . Manual Tuning . Scan Tuning.Memory Recall Tuning .ATS Tuning on FM,LW and MW...

1.Press the  POWER/SLEEP button to turn on
   the radio.
2.Press the button  marked FREQ (Frequency).DIRECT TUNING Example:To tune 100.70 MHz on the FM band, follow this procedure25FWM
POWER/
   SLEEPAuto tuning system
FREQ
ATSLWMWSWATSATSMETER
-STANDBY-TIMER 

3.Press the corresponding buttons marked [1],
   [0],[0],[.],[7],[0], That exact frequency 
   will now show up in the display.
4.Press the button marked  ENTER , the frequen-
   cy and band will now show up in the display.
   Note: Be sure to press the decimal point[.] in 
   100.70 MHz otherwise the display will show  
   SW [10.070 Mhz].26120m90m75m60m49m41m31m25m21m19m16m13m1 2 3 
4 5 6 
7 8 
0C
911mM
FREQ
ENTER
TIME  SET
DISPLAY
FREQ 

5.Extend the antenna all the way and rotate for 
   best FM reception.
6.Adjust the Volume control for comfortable
   listening.27AUTO TUNING SYSTEMTUNING POWER/
   SLEEPFINE-STANDBY-TIMERSWMETERTUNINGMANUAL/AUTODISPLAYTIME SETFREQM.SCAN 
MWLWFM
P1/P2
120m90m75m60m49m41m31m25m21m19m16m13m11m
1 2 3 4 5 6 7 8 0C9ENTERMATS606A
HWS
FM/LW/MW/SW SYNTHESIZED RECEIVER
VOLUME 

7.When selecting a FM stereo station, and using
    stereo earphones, make sure the FM mode swith 
    is in the STEREO position.To select a station when you do not know the 
frequency, use the Manual Tuning [][V] button.MANUAL TUNING28DC I N 4.5V75m41m21m13m3 
6 
911mM
ENTER
TIME  SETMWSWATSMETER
TIMERTUNINGMANUAL/AUTO 

1.Press the
   POWER/SLEEP   button to turn  on 
     radio.
2. Select a band. 29POW
ER/
   SLE EP Auto tuning system
LW
MW
SW