Sanyo 52lh1wp Instruction Manual

11
Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN
16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by
pressing the WIDE button repeatedly on the Remote Control.
When in AV2 (RGBHV) orPC mode FULL or NORMAL can be
selected.
Note: Full - Set display area 100%
Only  in DVI or AV2 (YPbPr) displaying high resolution content
FULL and FULL ALL are selectable.
Note : FULL - Set display area 95%
FULL ALL - Set display area 100%
All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower...

12
Using this function, you can enjoy a DVI orNetworkprogram and
an image (AV 1, AV 2,AV 3orPCinput) at the same time.
Press the ON/OFFbutton on the Remote Control repeatly to select
PIP1, PIP2,POPor OFF mode. 
During the PIP/POP mode, press the Main/Sub Picture Swap but-
ton will switch the location for main and sub picture.
 
Only the sound on the main picture is heard from the monitor  
speaker. The sound on the sub-picture cannot be heard.
 The details for PIP/POP operation (eg,location for sub...

13
Teletext is only available via external sources.
Teletext mode can be operated by the following buttons on the
Remote Control. 
  Some buttons have dual functions
OPERA OPERA
TION (IN TEXT MODE) TION (IN TEXT MODE)GBGB
Teletext Operation
Text Reveal
Press Text Revealbutton to reveal hidden items on the text page. 
Some pages such as quiz pages have the answers hidden. The button may
have to be held to keep the answer on the screen, or press again to remove
the answer.
In Reveal OFF, this indication...

14
Common specification
Power source                  100~240V  50Hz / 60Hz
Colour system    PAL / NTSC / NTSC4.43/ SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to 
pin 14) and audio-L/R
Output: composite video from AV3 and audio L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr 
AV3: BNC
Input: Composite video
Output : Composite video
Audio Monitor Out: CINCH L/R
Audio Speaker Out: 2 x 10W
DVI Input : DVI-D GROUP...

15
PC/DVI-D / COMPONENT SIGNAL SUPPORT TIMING LISTGBGB
Component signal support timing
Resolution
Horizontal
frequency (KHz)Vertical frequency
(Hz)Remark
61.2065.20
1152_900
61.8566.00
1152_900
71.4075.60
MAC_Normal 21” 31.4359.88
66.67
37.88
46.875
60.02 56.47 48.3649.72
75.03 70.0774.55
47.73
28.125
33.7560.03
50.00
60.00 60.01Mac ll SXGA +SXGA +SXGA SXGA SXGA SXGASXGASXGA SXGA SXGASXGA SXGA VESA 75HzSXGA VESA 60Hz720p-50Hz MAC_Normal 19”XGA
XGA
XGA
XGA VESA 85Hz XGA VESA 75HzXGA VESA 70HzXGA VESA...

42
RS232C Command T RS232C Command T
ables ables
Functional Execution Command Table
Command
CF DEA RMCN CF DEA RMCYCF CLOK OFFCF CLOK ON CF PSAVE OFFCF PSAVE ON
C92 C64 C76 C75
C74 C73 C72C71 C70 C0F C29C28C27 C26C25 C24 C01 C00
AV1 directWide “Normal” directWide “Full” direct POWER ON
POWER OFF
Wide “Natural” direct
Wide “Zoom 16:9” direct
Wide “Title in 16:9” direct
Wide “Zoom 14:9” direct
Wide “Title in 14:9” direct
RGB direct
AV2 RGBHV direct
AV2 YPbPr direct
AV3 direct
DVI direct
PC direct
PC Auto...

43
RS232C Command T RS232C Command T
ables ables
Time Read Command Table 
Status read command Item 
CR PANELH Status of accumulated lifetime of panel. 
The same as CR_LAMPH Command
CR MONH Status of accumulated lifetime of monitor 
The same as CR_PROJH Command
Sound control Read Command Table 
Status read commandItem
CR VOLUME Status of volume value. 
CR MUTE Status of MUTE. 
Setting Read Command Table 
Status read commandItem
CR LANG Status of Language selection. 
CR P-MANE Status of Power management...

Printed in U.K.
Part No. 1KA6P1P0393-A N5VW