Sanyo DP32671 Hdtv Lcd Owners Manual

11
ENGLISH
Playable discs
Disc type and logo mark content
DVD Video
Audio +
Video
(moving
pictures)
CD-DA
Audio
The following discs are also available. DVD-R/RW discs of DVD video format.
CD-R/RW discs of MP3/WMA/JPEG.
•
•
Disc
CAUTION:Only the left types of discs can be played on this 
unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. 
cannot be played.
This unit cannot play an 8 cm disc. It cannot also be 
played even using a disc adapter.
If you insert an irregular shaped disc, it may get 
stuck and cause a...

12
■ Title/Chapter/Track PC-created disc•  You may not be able to play discs recorded 
using a personal computer or recorder for disc 
compatibilities, scratches or marks on the disc, dirty 
lenses of the unit or condensation and so on.
•  Discs recorded using a personal computer may  not be playable in this unit due to the setting of the 
application software used to create the disc. In 
these particular instances, check with the software 
publisher for more detailed information.
■ Playable files•  ISO...

13
ENGLISH
Parts and functions
Front
To display the menu screen. 
Press MENU button to display the 
menu screen.
CH (CHANNEL)  /
 buttons,  VOL 
(VOLUME) +/–  buttons and INPUT/
ENTER  button can be used to select 
the desired setting during the menu 
screen operations. 
INPUT/ENTER button VOL (VOLUME) 
+/– buttons CH (CHANNEL) 
/1 (PLAY) button
MENU button
POWER Indicator
Red : Standby
Green : On
EJECT button
Left side
CH (CHANNEL) 
/3 (STOP) button
DISC slot
Remote sensor
POWER button
FOR SERVICE...

14
Remote control
POWER Power On/Off
DISPLAY Call TV informationCall DVD information
TV/DVD Switch between TV and DVD  (EJECT) Eject a disc
0-9/– Direct channel selection of TV Input setting
Enter a password
Input “–” for digital channels
SLEEP Sleep timer
SETUP/
TV MENU DVD mode - Call up initial setup mode
TV mode - Display menu of TV
PICTURE SIZE Display Picture Size menu
▲▼◀▶ Cursor buttons
ENTER Enter information in the menu
MUTE Switch off the sound
EXIT/
CANCEL Exit from On-Screen menu
Reset...

15
ENGLISH
Approximately 15 feet
Inserting Batteries
1Open the battery compartment 
cover in the direction of the arrow.2Install two “AA” batteries 
(not supplied), paying attention 
to the polarity diagram in the 
battery compartment.3Replace the compartment cover.
OperationAim the remote control at the remote sensor and press control 
buttons to operate.
Operate the remote control within a 30° angle on either side of 
the remote sensor, up to a distance of approximately 15 feet.
•
•
Remote control...

16
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your 
antenna system. If you are using a Cable TV service, see “Cable TV connections”.
Combination VHF/UHF Antenna (Single 75 ohm cable)
AntennaJack
75 ohm 
Coaxial 
CableConnect the 75 ohm cable from the combination 
VHF/UHF antenna to the Antenna Jack.
Cable TV connections
For basic Cable TV service not requiring a Converter/
Descrambler box, connect the 75 ohm Coaxial Cable directly...

17
ENGLISH
Starting setup
The Auto Setup menu appears the first time you 
turn on the TV, and assists you to specify the 
Air/Cable setting, and program your channels 
automatically.
IMPORTANT: Make sure that the antenna or cable 
TV system connection is made!
1To turn on the TV, press POWER (POWER 
indicator on the front of the unit changes green. 
It may take approx. 10 seconds for a picture to 
appear on screen.). The Auto Setup function 
begins.
Auto Setup
:Adjust
:Select
Automatic Search StartThis...

18
DISPLAYPress DISPLAY to display the current information on 
the screen.
When the TV receives a digital signal, the digital 
information will appear.
  62-1  HDTV Moving Picture1CH-1 TV-MA
Digital     Air 
No Program Information is availableSleep Timer Off
English
Full
1080i
Channel number
• Station name •
Channel label (if preset)
•Broadcast program name•
V-Chip rating
• Signal type •
Sleep timer
• Audio language •
Program guide
• Picture size •
Resolution
•
When the TV receives an analog signal, the...

19
ENGLISH
Convenience functions
You can change the default settings by pressing the TV MENU button on your remote, then select the one of the icons 
at the left of the menu - follow the On-Screen prompts to set your preferences.
Icon Selected Items Setup hintPicture Picture 
Preference Sports Bright and dynamic picture (factory-set)
Standard Standard picture quality (factory-set)
Movie Movie-like picture setting (factory-set)
Memory Your personal preferences (set by you; see “Picture Setting”)
Picture...

20
Memorizing channels
This TV is equipped with a channel memory 
feature which allows channels to skip up or down 
to the next channel set into memory, skipping 
over unwanted channels. Before selecting 
channels, they must be programmed into the 
TV’s memory. To use this TV with an antenna, set 
the Signal Type option to the Air mode. When 
shipped from the factory, this menu option is in 
the Cable mode.
Air/Cable selection
1Select “Channel”, then press ▶ or ENTER.
2Press ▲ or ▼ to select “Auto Ch...