Sanyo Lcd 26xr7 Instruction Manual

							Remote Control1. POWER
Turn the unit on or off
2. Teletext
To enter or exit teletext mode (Teletext)
3. Hold
To hold the current teletext page temporarily (Teletext) 
4. Reveal
To display hidden information such as solution to riddles and  
puzzles(Teletext)
5. Menu
To access the menu main page 
6. CH+/-(5/6),VOL+/-(3/4) , OK 
    CH+/-(5/6)
To select channels upward or downward; to move upward or downward in 
menu operation;
     VOL+/-(3/4)
    Used to adjust volume
     To move left or right in menu operation; to adjust selected menu item when 
in menu operation;
     OK button: To exit the on-screen menu.
7. Source
To access source select menu
8. Stereo
To select stereo, mono or bilingual; RED button (Teletext)
9. Sleep
To set sleep timer; GREEN button (Teletext) 
10. 0-9 number
     Use these number buttons to select channel or input password
11. P.Mode
To select the picture mode
12. Clock
To display the real time on the screen while viewing TV program which 
carries a teletext broadcasting
13. Size
To expand top half or bottom half page of current screen (Teletext)
14. Index
Todisplay the main index (Teletext)
15. Mix
To superimpose text on a TV picture (Teletext)
16. Mute
To temporarily mute the sound
17. Zoom
To select screen aspect ratio
18. Auto
To rectify the picture automatically in VGA mode; BLUE button (Teletext)
19. Still
To freeze current picture; YELLOW button (Teletext)
20.  Display
To display channel status or signal information
21. Return
To quickly return to the previous channel
22. S.Mode
To select the sound mode Identification of Controls (continued)812345678910111213141516171819212022 
						

							ConnectionsCautions before connectingCarefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.9Decoder21-pin SCART
connectorNote:1.The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal format 
automatically. The unit chooses the RGB signal  prior to the CVBS (VIDEO) signal.
2.To connect to external devices with AV terminals,  you may use 21-pin Scart Converter to connect to SCART interface on the unit , 
and the unit receives CVBS (VIDEO) signal only. Connect the SCART Cable between the unit and the Decoder.How to connect:1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select SCART 1 and press  or to confirm.
3. Turn on your Decoder.34To watch DecoderConnect a DecoderVGAHDMITV  AV
SCART2 AVSCART2 YCYPBPR
SOURCE
  SCART 1 
:ADJ
 
						

							10Note:
						

							Connections (continued)Connect AV or S-Video inputs11VCR
Video CameraExamples of external devices that can be connectedHome video
game systemNote:For better video, you can use the S-Video terminal if your source supports it. The S-Video is prior 
to Video terminal when they are connected at the same time. To view picture from the Video 
terminal, disconnect any plug from the S-Video terminal.The Video input terminal on the AV IN and the S-Video input terminal share the same Audio input terminals.1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select AV( or AV/SV if the S-Video terminal is 
connected) and press  oro confirm.
3. Turn on the external device and play it.34tTo view signal from AV/S-VIDEO inputsConnect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit 
and external devices.How to connect:The unit provides Audio/Video inputs for you to connect external devices such as VCR, Video Camera or Home video game system.Yellow (VIDEO)White (AUDIO L/MONO)Red (AUDIO R )
W W
Y
R
W
Y
R
YAudio
cableVideo
cableW WRS-Video
cableor
VGAHDMITV  AV
SCART2 AVSCART2 YCYPBPR
SOURCE
  SCART 1 
:ADJ
 
						

							Connect a DVD playerConnections (continued)12Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD player.
Connect the Audio cable between  the AUDIO  input jack on the unit and AUDIO output jacks on the DVD player.How to connect a DVD Player using Component Video Connections:1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select YPBPR and press  or to confirm.
3. Turn on your DVD player, insert a DVD disc and press the Play button.34To play DVDNote:The Y, Pb,Pr outputs on your DVD player are sometimes labeled Y, Cb, Cr  or Y, B-Y, R-Y. If so, connect the cables to like colours.VGAHDMITV  AV
SCART2 AVSCART2 YCYPBPR
SOURCE
  SCART 1 Audio cableVideo cable
W
DVD player
AUDIOCOMPONENT
WR
-
SVIDEOAV  OUTRLVIDEOAUDIO
LRAUDIOP
bP
rY
R RGB
W
R
G
Bwhite (audio L)red (audio R, P  )Green (Y)Blue (P  )
r
b
:ADJ
 
						

							Connections (continued)13Device with HDMI jackHDMI OUTPUTAudio cableD-Sub cablePCConnect a HDMI deviceConnect a PC1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select VGA and press  or to confirm.
3. Turn on your PC and check for PC system requirements.
4. Adjust the PC screen.34To Watch the PC screenConnect a D-Sub cable between the D-Sub interface on the PC and the D-Sub 
interface on the unit.How to connect:1. Turn on your LCD TV , press SOURCE      button on the remote control.
2. Use 5 or 6 repeatedly to select HDMI and press  or to confirm.
3. Turn on your device.34To Play the DeviceConnect the HDMI cable between the HDMI input jack on the unit and HDMI 
output jack on the product.Note:
The HDMI Sources are compatible with DVI displays through the use of a 
passive cable converter. So you may connect product with DVI output jack to the unit.   
Connect a passive cable converter between the HDMI input jack on the How to connect:HDMI cable
VGAHDMITV  AV
SCART2 AVSCART2 YCYPBPR
SOURCE
  SCART 1 
VGAHDMITV  AV
SCART2 AVSCART2 YCYPBPR
SOURCE
  SCART 1 
:ADJ
:ADJ
 
						

							Turning the Unit On and OffTurning OnTurning OffWith the power on, press the Power     button on the remote control to turn off.
If you would like to cut off the power completely, press the Power Switch directly.Note:You can also use the Power     button on the Control panel on the main unit.
After you turn off the TV, you should wait for some seconds to turn the TV on again .Viewing the Menus and DisplaysViewing the MenusYour LCD TV has a simple, easy-to-use menu system that appears on the screen. This system makes it convenient and fast 
to use features on the unit. The unit also lets you display the status of many of your LCD TV features.With the power on, press the MENU button on the remote control. The main 
menu appears on the screen. Use the 5or 6 to select menu item and or to adjust value 
of item34or setting 
 the.13Note:To clearly introduce the menu operations , this operation manual provides a 
description based on operation with the remote control.Insert the power cord into the wall outlet, press the Power Switch on the unit to power on.
If the unit is in STANDBY mode, press the Power     button on the remote control to turn on 
the unit.14Press34  orto select menu page, and press6to access.2Press OK button to exit the menu or press MENU button to return to the 
previous menu.4Displaying Status InformationPress the DISPLAY      button on the remote control, the unit will display current status information such as channel number, audio mode 
or signal source, etc.ÿSELÿADJÿEXITPICTURE  MODECONTRASTSATURATIONHUESHARPNESSPERSONALMENUBRIGHTNESSCOLOR  TEMP.53NRZOOMFULLOFFWARM50505050PICTUREBasic Operations 
						

							ÿSELÿADJÿEXITOSD  LANGUAGEOSD  H-POSITIONOSD  HALFTONEOSD  DURATIONMENUOSD  V-POSITION15  SEC504450SYSTEMSelecting Input Source SignalPress the SOURCE button to display the SOURCE menu .112VGA------Select signal from VGA (D-SUB) jack.
HDMI-------Select signal from HDMI/DVI terminals.
TV--------Select TV signal.
AV(or AV/SV)-------Select signal from AV IN or S-Video terminals.
SCART  1----Select signal from 21-PIN SCART 1 interface.
SCART2  AV-----Select signal from 21-PIN SCART 2  interface.
SCART2  YC-----Select SCART2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.
YPBPR------Select signal from YPbPr terminal.Press  to select . 5or6a desired input sourcePress 3 or 4 to confirm.3Selecting a Menu LanguagePress OK button to exit the menu or press MENU button to return to the 
previous menu.5Press  MENU to display the menu main page.1Press  repeatedly to select  menu. 3or4SYSTEM2Press  to access the menu. 63Presso select a 
desired OSD language.3or4taccess the selection bar, and then use 3or4to 4The [OSD LANGUAGE] item will be highlighted automatically.VGAHDMI
  AV  SCART 1 SCART2 AVSCART2 YCYPBPR
SOURCE
TVBasic Operations (continued)Changing ChannelsUsing the Channel Buttons (CH+ or CH-)Press the CH+ or CH-  to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were skipped.Direct Accessing ChannelsPress the number buttons to go directly to a channel.To select a one-digit channel: press the 0-9 number buttons to input the channel number, followed by OK button or wait for some 
seconds,  and the unit automatically goes to the selected channel .
To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel .
To select a three-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel.When you use the number buttons, you can directly select channels  that  were  skipped.Note:Using the RETURN      buttonPress this button to switch between the current channel and the previous channel.15
:ADJ
 
						

							Memorizing the ChannelsYour LCD TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan through 
the channels.16CHANNEL  LABELD/KBefore you start AUTO SCAN, it is necessary to select a region firstly.Selecting a RegionPress  to . 3or4select a proper region according to your area4Press  MENU to display the menu main page.1Press repeatedly to select  menu, and press to access. 3or4TV-CHANNEL62Press or to select  item. 56repeatedly PROGRAM AREA3Press OK button to exit the menu or press MENU button to return to 
the previous menu.5TV - CHANNELÿSELÿADJÿEXITCOLOR  SYSTEMAUTO  SCANAUTOMANUAL  SEARCHB/GMENUOTHERPROGRAM  AREASOUND  SYSTEMCHANNEL  LABELSearching Channels AutomaticallyPress 3 to .
.  or4begin the auto channel search
The unit will begin memorizing all of the available channels. 
If there is any channel locked, you must first input your password to 
perform the auto channel searchNote: During the process of the Auto Scan, you can press OK or MENU button to 
stop the search.1Navigate to theTV-CHANNEL   menu, and highlight AUTO SCAN item.2TV - CHANNELÿSELÿADJÿEXITCOLOR  SYSTEMSOUND  SYSTEMAUTO  SCANMANUAL  SEARCHCHANNEL  LABELAUTOMENUOTHERPROGRAM  AREAB/GIf there is any channel locked, you cannot access the manual search submenu unless you 
input the correct password. 
After the Manual Search, you can press OK button to exit the menu or press MENU button 
to return to the previous menu.Searching Channels ManuallyPress or to select FREQUENCY item. You may press 0-9 number buttons 
to input a frequency directly or press 3 or 4 to search program from current 
frequency. 56Use 0-9 number buttons to directly select a channel that you want to perform 
manual search.13Press  to access the next level menu. 44Press 4, the set searches towards higher frequency.
Press 3, the set searches towards lower frequency.Use Manual Search if desired channels can not be memorized or if you would 
like to store programs to specific channel numbers one by one.TV - CHANNELÿSELÿADJÿEXITCOLOR  SYSTEMSOUND  SYSTEMAUTO  SCANMANUAL  SEARCHCHANNEL  LABELAUTOB/GMENUOTHERPROGRAM  AREATV - CHANNELÿSELÿADJÿEXITCURRENT  CHSKIPEXCHANGEAFCFINE TUNING1OFFMENU1TARGET  CHFREQUENCYOFF043.70  MHZ50To search program manually from current frequency:The search stops when a program is found and this program will be stored in current channel.To search program manually by inputting a frequency:
1. Highlight the FREQUENCY item, the unit allows you to input a frequency.
2. Input the desired frequency by using 0~9 number buttons, then the unit locates 
to your frequency.- or - - or -Navigate to theTV-CHANNEL   menu, and highlight MANUAL SEARCH item.2
 
						

							Memorizing the Channels (continued)17If you fine-tune a program manually, the AFC will be turned off automatically.Manual Fine TuningPress or to select FINE TUNING item. 564Press  MENU to display the menu main page.1Press 3 or 4repeatedly to select TV-CHANNEL menu, and press to access. 62Press or to select MANUAL SEARCH item, and press  to access. 56repeatedly 43Press and hold3 or 4 to fine tune till the best possible picture and sound 
are obtained.5TV - CHANNELÿSELÿADJÿEXITCURRENT  CHSKIPEXCHANGEAFCFINE TUNING1OFFMENU1TARGET  CHFREQUENCYOFF043.70  MHZ50Setting Auto Frequency Control (AFC)Press 3 or 4 to select ON or OFF.1Navigate to thesub  MANUAL SEARCH menu, and highlight  AFC item.2When the AFC is set to ON, the unit will automatically tune the program 
frequency to provide the best possible picture and sound.TV - CHANNELÿSELÿADJÿEXITCURRENT  CHSKIPEXCHANGEAFCFINE TUNING1OFFMENU1TARGET  CHFREQUENCYOFF043.70  MHZ503Press OK button to exit the menu or press MENU button to return to the 
previous menu.The skipped channels can not be selected by using CH+/- buttons unless you use 
number buttons to input channel number directly.Skipping ChannelsPress 3 or 4 to select ON or OFF.
When the item is set to ON, the selected channel will be skipped.2Navigate to thesub  MANUAL SEARCH menu, and highlight SKIP item.34Press OK button to exit the menu or press MENU button to return to the 
previous menu.TV - CHANNELÿSELÿADJÿEXITCURRENT  CHSKIPEXCHANGEAFCFINE TUNING1ONMENU1TARGET  CHFREQUENCYOFF043.70  MHZ501Use channel buttons to select a channel you want to skip.