Sanyo Lcd 32k20 Owners Manual

							21
TUNING THE TV FOR THE FIRST TIME
Before switching on the TV, put your decoder and media recorder 
to Standby if they are connected and ensure the antenna is 
connected. Tosetup the TV use the buttons on the remote control 
as detailed on page.
This screen will appear the first time that the TV is switched on and 
ezch time the TV is reset.

Language include the “English”, “Françals” and “Û
.

to select the state in which you live. State include the NSW/
ACT(New South Wales/Australian Capital Territory). VIC(Victoria), 
OLD(Queensland), SA(South Australia), WA(Westem Australia), 
TAS(Tasmania) and NT(Northern Territory).
Press
 to setup “Energy Saving Mode”.

Notes:
To ensure your television is operating at optimal energy 
efficiency, select ECO mode during initial activation. ECO mode is 
recommended for normal home use.
Energy Saving Mode: The factory default settings of this television 
meet ENERGY SAVING requirements. Changing Picture Settings 
may increase energy consumption, possibly beyond the limits 
required for ENERGY SAVING qualification.
To return to ECO mode settings, select Standard picture mode.
 Standard picture mode is used to achieve published average 
power values, and this mode is recommended for normal home 
use.
Press 
 to set “Energy Saving Mode” and to start ATV/DTV Scan.
The Auto Scan screen will appear and the TV will automatically 
start to search for available stations. The progress bar will 
move along the line.
When DTV search is completed, the TV will automatically turn to 
the lowest logical channel number.
1
2
3
4
5
•
•
•
•
6
7
Initial Installation
Menu Language
Country/Region
Province/State
Star TV Scan       Cancel
OKBACK
English
Australia
NSW/ACT
TV Auto Scan
10%VL ATV Channels:0
MENU OPERATION (TV/AV mode)
 
						

							22
MENU OPERATION (TV/AV mode)
PICTURE
PressMENU buttoQDQGWKHPDLQPHQXZLOODSSHDU3UHVV
{
y
buttons to select PICTURE.
3UHVV
x
zEXWWRQVWRVHOHFWWKHLWHPGHVLUHG
3UHVV
{
yEXWWRQVWRDGMXVWYDOXH
PressBACK button to return to the previous menu.
PICTURE MODE
SelectDynamic, Standare, M
ovie pressing 
{
yEXWWRQV
Mode Picture quality
Dynamic Bright and dynamic picture
Standard Standard picture
Movie Mild soft picture
Memory Memory the picture quality you set
 Note:
In the PC input mode this mode is not available.
Adjusting the Basic picture quality

“PICTURE”.
Press

3UHVV
{
yEXWWRQVWRVHOHFW³0HPRU\´
VV

x
zEXWWRQVWRDGMXVWWKHVHWWLQJDVUHTXLUHG
Selection
{
Pressing
y
Contrast lower higher
Brightness darker lighter
Color paler deeper
Sharpness softer sharper
Tint reddish greenish
 Note:
The Tint may only be adjust on a tape which has been recorded 
and played back on an NTSC VCR.
In the PC input mode ( page xx ) Sharpness mode is not available.
Color Temperature
You can change the tone of the picture by selecting from three 
preset color temperatures: “Cool”, “Normal” or “Warm”.
7HPS
						

							23
MENU OPERATION (TV/AV mode)
Aspect Ratio
Select screen size among “Wide”,”Super Live 2”,”Cinema2”,”4:3” 
,”Super Live1”, “Cinema 1”, “Subtitle”, “14:9” and “Auto” on Menu. 
(See Page 18)

then press  .
3UHVV
{
yEXWWRQVWRVHOHFWVFUHHQVL]H
Backlight
In order to improve screen visibility, the active backlight control 
sets the screen brightness automatically during dark scenes.

press . 
3UHVV
{
yEXWWRQVWRVHOHFW³2II´RU³2Q´
If you want to adjust Backlight manually, turn Active Backlight 
&RQWUROWR2IIWKHQSUHVV
z

DNR
If the receiving signal is weak and the picture is blurry, the picture 
may be improved whe using this function.

press . 

buttons to adjust the settings as requires.
Note:
In the PC input mode this mode is not available.
1
2
1
2
3
4
1
2
•
 
						

							24
MENU OPERATION (TV/AV mode)
Cinema Mode ( VIDEO 1/VIDEO 2 only)
A movie film’s picture runs at 24 frames a second, whereas movie 
software suvh as DVD, etc., that you enjoy watching on television at 
home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this 
signal to reproduce a smooth motion and picture quality, select the 
“On” mode.
Effective signal and setup confitions:
When the Video input mode is selected.
When the input signal format is 480i and 576i signals,

“PICTURE” menu then press 
 . 


 .
3UHVV
{
yEXWWRQVWRWXUQ³2Q´RU³2II´
Note:
When a DVD movie with subtitle is playing back, this mode may 
not work correctly.
Cinema Mode only support to VIDEO 1, VIDEO 2, when AV 
connection setting is in CVBS mode. •
•
1
2
3
•
•
Menu...
ˆPICTURE... Picture Mode
‰Picture Mode
Cinema Mode
Color Temp
Aspect Ratio
Backlight
DNRCinema ModeOff
Confirm        Return        Navigate          CancelMENUOKBACK
 
						

							25
MENU OPERATION (TV/AV mode)
AUDIO
PressMENUEXWWRQDQGWKHPDLQPHQXZLOODSSHDU3UHVV
{
y
buttons to select  “AUDIO”, and will display AUDIO menu.
3UHVV
x
zEXWWRQVWRVHOHFWWKHLWHPGHVLUHG
3UHVV
{
yEXWWRQVWRDGMXVWYDOXH
PressBACK button to return to the previous menu. 
Selectable Sound ( Digital only)

then press  .


W

When you select “Standard”, “Movie”, “Music”, the setting was fixed 
and can’t adjust.
Selection
{
Pressing
y
Bass weaker stronger
Treble weaker stronger
Blancedecreases the right 
channeldecreases the left 
channel
Bass Boost (For User mode adjust)
.
3UHVV
{
yWRVHOHFW³2II´³/RZ´³0LG´DQG³+LJK´
Note:
The Bass Boost effect is active only when the sound outputs from 
the speaker.
Vitual Surround (For User mode adjust)
The Virtual Surround is especially useful if you want to setting up 
virtual surround for TV. 
)URPWKH³6RXQG´SUHVV
x
zWRVHOHFW³9LUWXDO6XUURXQG´WKHQSUHVV .
3UHVV
{
yWRVHOHFW³2II´RU³2Q´
Note:
The Virtual Surround effect is active only when the sound outputs 
from the speaker.
When the Selectable Sound setting isnt in User mode, the Virtual 
Surround menu is not selectable.
1
2
3

v
1
2
3
4
1
2
•
1
2
•
•
SCREEN MENU
DTV Menu...
ˆAUDIO
‰Selectable Sound User
Bass Setting
Treble Setting
Balance Setting
Confirm        Return        Navigate          Cancel
MENUOKBACK
Selectable Sound
Bass Boost
Virtal Surround0
0
0
DTV Menu...
ˆAUDIO...Selectable Sound
‰Selectable Sound User
Bass Setting
Treble Setting
Balance Setting
Confirm        Return        Navigate          Cancel
MENUOKBACK
0
0
0Selectable Sound
Bass Boost
Virtal Surround
 
						

							26
MENU OPERATION (TV/AV mode)
MTS ( analog TV only)
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual 
programs depending on the broadcast signal.
PressMENUEXWWRQWKHQSUHVV
{
yEXWWRQVWRGLVSOD\WKH
“SOUND” menu then press !.!
3UHVV
x
zEXWWRQVWRVHOHFW076WKHQSUHVVDQG
{
yEXWWRQV
to “Auto” or “Mono”.
3UHVV
{
yEXWWRQVWRWXUQ³2Q´RU³2II´
Mono mode
If you experience noise or poor reception of any stereo/bilingual 
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose 
channel reception is usually good, try setting MTS mode to Auto, 
then switch
A/Bto Mono (monaural).
1
2
3
•
SCREEN MENU
ATV Menu...
ˆAUDIO
‰
Confirm        Return        Navigate          CancelMENUOKBACK
MTS
Dual
Selectable Sound
Bass Boost
Virtal SurroundAuto
ATV Menu...
ˆAUDIO...MTS‰
Confirm        Return        Navigate          CancelMENUOKBACK
MTS
Dual
Selectable Sound
Bass Boost
Virtal SurroundAuto
Dual 1 or Dual 2 mode ( analog TV only)
You can hear only Dual 1 or Dual 2 sound selected, whenever 
bilingual programs are received.

“SOUND” menu then press 
 . 
3UHVV
x
zEXWWRQVWRVHOHFWXDOWKHQSUHVV
DQG
{
yEXWWRQV
to “Dual 1” or “Dual 2”.
3UHVV
{
yEXWWRQVWRWXUQ³2Q´RU³2II´
Mono mode
If you experience noise or poor reception of any stereo/bilingual 
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
When the MTS setting is in Mono mode, the Dual is not 
selectable.
The Dual setting status remains even if the TV is turned off.
1
2
3
•
•
AV Menu...
ˆAUDIO...Dual‰
Confirm        Return        Navigate          CancelMENUOKBACK
MTS
Dual
Selectable Sound
Bass Boost
Virtal SurroundDual 1
 
						

							27
MENU OPERATION (TV/AV mode)
SETUP
PressMENUEXWWRQDQGWKHPDLQPHQXZLOODSSHDU3UHVV
{
y
buttons to select “SETUP”,  and will display “SETUP” menu.
3UHVV
x
zEXWWRQVWRVHOHFWWKHLWHPGHVLUHG
3UHVV
{
yEXWWRQVWRDGMXVWYDOXH
PressBACK button to return to the previous menu. 
Language
Coutry/Region
Full Search ( Digital TV only)
As new services are broadcast, it will be necessary to re-tune the TV in 
order to view them.
Full Seach will completely re-tune the TV and can be used to updated 
the channel list. It is recommended that Full Seach is run periodically 
to ensure that all new services are added. All stored programs and 
settings, including Timer entries, favorites and locked programs, will be 
lost.
PressMENUEXWWRQDQG
{
yEXWWRQVWRGLVSOD\WKH³6(783´
menu.!
PressDQG
x
zEXWWRQVWRVHOHFW)XOO6HDUFK´
Press
, a confirmation screen willappear indicating that This
will do full search, Are your sure?
Press
, to start “Auto tuning”.
The below sample display shows “Full Search” in progress.
The channel number will show 1~69.
DTV Channels will display searched channel and name 
information.
Radio Channels will display searched channel and name 
information.
“Full Search” will show scan of “DTV Channels/Radio Channels” list.
When the search is complete, the TV will auto matically tune to the 
lowest logical channel number.
Note:
After the Full Search, the TV may have scanned identical 
channels being broadcast from different transmitters. Pressing 
 to helps you to check Full Search result. If you do find 
channels with the same logical channel numbers but different 
physical channel numbers, it is recommended that you skip these 
duplicate channels and keep only one channel with the best 
signal strength as indicated by the signal strength bar in the on-
screen information.
1
2
3

v
1
2
3
4
5
6
•
SCREEN MENU
DTV Menu...
ˆSETUP
‰Menu LanguageEnglish
Confirm        Return        Navigate          Cancel
MENUOK
Language
Country/Region
Full Search
Quick Search
Manual Search
Channel List
Groupe Fav: 1
BACK
DTV Menu...
ˆSETUP
‰
Confirm        Return        Navigate          CancelMENUOK
Quick Search
Manual Search
Channel List
Groupe Fav: 1
Groupe Fav: 2
Groupe Fav: 3
Erase Channels
BACK
 
						

							28
MENU OPERATION (TV/AV mode)
 
						

							29
MENU OPERATION (TV/AV mode)
 
						

							30
MENU OPERATION (TV/AV mode)