Sanyo Lcd 32xa2 Instruction Manual
Have a look at the manual Sanyo Lcd 32xa2 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
VCR and DVD Use 21 21 This remote control transmitter has been designed to be used in conjunction with selected SANYO VCR’s and DVD players. Some SANYO VCR’s and DVD players may have their own functions, so please refer to the individual instruction booklet when using this remote control to ensure compatibility. Some of the buttons are used for both the VCR and DVD player. The symbols indicated with blue are for the buttons to control the DVD player. When use the DVD player with this remote control, first press and holdthe DVD button and then press your desired control button each time. VCR DVD Not used DVD command mode selection Power Power Play Play pause Pause Stop Stop Fast/Cue Next chapter selection Rewind/Review Previous chapter selection Record, press both buttons Not used at the same time Not used Enter Not used Cursor selection Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 21
22 22 AV Terminals VIDEOAV4 AUDIO L R AV1AV2 AV3 AUDIO MONITOR OUTL R AV5 Y CB CR AUDIO L R L R VIDEO L R VIDEO DVD INPUT Audio Video Input Jacks (AV4) DVD Input(Component Video Input and Audio Input jacks) (AV5) Headphone Jack (Mini Stereo Jack) For personal listening, a head- phone can be connected to the headphone jack. Audio Monitor Output Jacks Audio Video Input Jacks (AV1) Scart Terminal (AV2) Input: Composite video, RGB, S-video and audio-L/R Output: Monitor-output with composite video and audio-L/R Audio Video Input Jacks (AV3) Side Terminal Rear Terminal Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 22
Connecting Other Equipment 23 23 You can connect a VCR, S-VHS VCR, Satellite Tuner, PAY TV Decoder, DVD or Camcoder to this TV via the AV terminals and the SCART terminal. ■Depending on the type of video tape or connected AV equipment being used, it may be necessary to select colour system. In this case, press the Recall/Colour Systembutton and select a suitable colour system. Colour system setting for AV position is automatically stored in the memory. ■By pressing the Stereo/Monobutton repeatedly, you can select the sound track L (left), R (right) or L/R. ■ You can select and return to a TV programme by selecting any of the TV position while watching a playback from a VCR, DVD, etc. ■Select “AV2” mode by pressing the TV/AV Selectorfor watching. S-Video Connection through Scart Terminal Adaptor AV1AV2 AV3 AUDIO MONITOR OUTL R AV5 Y CB CR AUDIO L R L R VIDEO L R DVD INPUT DVDR-AUDIO - L/MONO VIDEO S-VIDEO When you use a S-VHS VCR not provided with the 21-pins scart terminal, connect it with the AV 2 terminal using Scart Terminal Adaptor, and set AV2 status on “S-Video” (Refer to the Setting Menu on page 16). S-VHS VCR Scart Terminal Adapter (Supplied with TV set) PLAYBACK DVD Player etc. To audio output To S-Video output Important Note: Do not input to both S-Video and RCA video input jack of the Scart Terminal Adaptor at the same time to avoid signal mix and distorted picture. S-Video Jack Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 23
24 24 Connecting Other Equipment AV1AV2 AV3 AUDIO MONITOR OUTL R AV5 Y CB CR AUDIO L R L R VIDEO L R VIDEO DVD INPUT DVD Connecting to the Rear AV5 Input Jacks DVD Player Connection DVD Player If your DVD player has the component video output jacks, connect the TV to these jacks instead of the video input or S-VIDEO input jacks. You can enjoy high quality picture play- back. ● Take care to ensure that the component video terminals (Y, CBand CR) are wired correctly. ● Video input to the component video terminals (Y, CBand CR) is not output on the video monitor output pin of the scart terminal. To audio output YCRCB Y C R CB PLAYBACK ■Select “AV5” mode by pressing the TV/AV Selectorfor watching. Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 24
Connecting Other Equipment 25 25 VIDEOAV4 AUDIO L R Connecting to the Side AV4 Input Jacks PLAYBACKCamcorder It is convenient to use the AV4 input jack on the side panel for equipment that is often connected and disconnected. Video Game Headphone Connecting a Stereo Amplifier to Audio Monitor Output Jacks ■Select “AV4” mode by pressing the TV/AV Selectorfor watching. AV1AV2 AV3 AUDIO MONITOR OUTL R AV5 Y CB CR AUDIO L R L R VIDEO L R VIDEO DVD INPUT Stereo Amplifier ●Do not connect external speakers directly to the TV. Connect Audio Monitor Out terminals (R/L) to the Stereo Amplifier Input (R/L). The audio signal being output from the TV speaker is output through the Audio Monitor Output jacks. Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 25
26 26 Helpful Hints ■Helpful hints ■ NO PICTURE, NO SOUND ●Check if TV is plugged in. ●Try a different channel, if OK, probably station trouble. ■ POOR PICTURE, SOUND OK ●Adjust BRIGHTNESS control. ●Adjust FINE TUNING control. ●Check aerial connections ■ NO COLOUR, PICTURE OK ●Adjust COLOUR control. ●Adjust FINE TUNING control. ●Is the programme in colour ? ■ WEAK PICTURE ●Check aerial connections on back of set. ●Check aerial for broken wires. ●Re-orient aerial. ■ The following faults are not caused by the receiver: GHOSTS Reflections of signals from mountains or high buildings will cause multiple images, called Ghosts. These abnormal conditions can be reduced to minimum by repositioning aerial or by installing a new one suited for your area. INTERFERENCE Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. The word “BBE” and BBE symbol are registered trademarks of BBE Sound, Inc. R Manufactured under license from BBE Sound, Inc. Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 26
27 27 Specifications Power SourceAC100-264 Volts, 50Hz/60Hz Colour SystemPAL/SECAM/NTSC4.43/NTSC3.58/PAL-60Hz Sound SystemB/G, D/K, I, M/M Channel CoverageVHF: E2-E12, A2-A13,R1-R12,J1-J12,K1-K9 UHF: 21-69,A14-A69,J13-J62 CATV: S1 -S41, X, Y, Z, Z+1, Z+2 Aerial Input Impedance75 Ω LCD Panel(Model LCD-27XA2) Screen Size (Measured Diagonally):27 inches Picture Resolution:WXGA 1280 (Horiz.) x 720 (Vert.) pixels Viewing Angles:Horiz. 176˚, Vert. 176˚ Contrast Ratio:900:1 Brightness:550 cd/m 2 LCD Panel (Model LCD-32XA2) Screen Size (Measured Diagonally):32 inches Picture Resolution:WXGA 1366 (Horiz.) x 768 (Vert.) pixels Viewing Angles:Horiz. 176˚, Vert. 176˚ Contrast Ratio:1000:1 Brightness:550 cd/m 2 Audio Output (RMS) 10W + 10W Speaker6 cm x 12 cm x 2 pcs. AV Terminals AV1 Video:Composite video (RCA Jack) x 1 Audio:L/R Stereo Input (RCA Jack) x 1 set AV 2CENELEC Standard (Scart Terminal) Input: Composite video, RGB, S-video and audio-L/R Output: Monitor-output with composite video and audio-L/R AV 3Video:Composite video (RCA Jack) x 1 Audio:L/R Stereo Input (RCA Jack) x 1 set AV 4Video:Composite video (RCA Jack) x 1 Audio:L/R Stereo Input (RCA Jack) x 1 set AV 5Video:Component Y, C B,CRInput (RCA Jack) x 1 set Audio:L/R Stereo Input (RCA Jack) x 1 set Audio Monitor Output:L/R Stereo Output (RCA Jack) x 1 set Headphone Jack:Mini Stereo Jack x 1 Net weightModel LCD-27XA2: Approx. 14.1 Kg (Included Swivel Stand) Model LCD-32XA2: Approx. 17.5 Kg (Included Swivel Stand) Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 27
SANYO ELECTRIC Co., Ltd.Part No. 1AA6P1P4901--N2WW (UE2-A) Specifications Dimensions 210 436476 800 599 338 377233 109153 Model LCD-27XA2 Model LCD-32XA2 Specification subject to change without notice 377 245 506545 922 711 401 233 115153 (Unit : mm) (Unit : mm) Inst. Manual_N2WW(UE2-A) 5/30/05 3:08 PM Page 28