Sanyo Lcd 37ca9s Owners Manual

							11
32,17
x/
z/
{/
ybutton
Display button
SOUND SYSTEM button
COLOUR SYSTEM button
ECO button
AUDIO MODE button
CHANNEL RECALL button
WIDE button
BEFORE OPERATION
MENU button
SPORTS button
INPUT button
OPERATION OF REMOTE CONTROL
POWER ON/OFF button
BASS  button
MUTE  button 
NUMERIC  buttons
TIMER button
BACK button
TXT/TV button
DIGIT  button
STILL  button
VIDEO MODE button
PIP button
CHANGE button
STEREO/MONO button
MAIN/SUB button
Note:1. USB, POP, WOW HD and WOOFER buttons are not used.
 2. In different mode, some buttons have different functions. (For details, please refer to page21.)
1111
 
						

							12
REMOTE CONTROL BATTERIES INSTALLATION
Remove the battery compartment cover .Insert two size AAA batteries (1.5V) 
according to + and - polarity markings 
inside the battery compartment.
Close the battery compartment cover.
12
3
OPERATION RANGE
30
30
15
15
BEFORE OPERATION
5m
Point Remote Control toward LCD TV (Infrared 
Remote Receiver) whenever pressing the 
buttons. Maximum operating range for Remote 
Control is about 16.4’ (5m) in front, about 30° to 
the left or the right, about 15° for up or down. 
To insure safe operation, please observe the following precautions:


						

							13
BEFORE OPERATION
TV/AV MODE MENU LIST
MAIN MENU (CHANNEL MENU)
CHANNEL MENU
PICTURE MENU
SOUND MENU
Note: CHANNEL menu is only active in TV  
           mode.
ON-SCREEN MENU
SELADJBACKEXITBACK
MENU
SOUND MODE
BASS
TREBLE
BALANCE50
5050
LCD-CA9S-A NEW.indd   132/06/2008   2:08:06 PM
 
						

							14
BEFORE OPERATION
SELECTADJUSTBACKEXIT
- - : - -ON TIMER
SELADJ BACK
EXIT
ON TIMER CH                                  29OFF
BACKMENU
OFF TIMER
TIMER MENU
OSD MENU
H-POSITION
V-POSITION
DURATION
SEL
ADJBACKEXIT
LANGUAGE
15 SEC
BACK
MENU
TRANSPARENCE
TTX LANGUAGEWESTERN
SYSTEM MENU
TV/AV MODE MENU LIST
MAIN MENU (CHANNEL MENU)
ON-SCREEN MENU
`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUST
LCD-CA9S-A NEW.indd   142/06/2008   2:08:10 PM
 
						

							15
`RYNQWONPXReVaONPX
ZR[b
ECO
CHILD LOCK
PC ADJUST
BEFORE OPERATION
PC/HDMI MODE MENU LIST
MAIN MENU (PICTURE MENU)
H-POSITION
V-POSITION
CLOCK
PHASE
SELADJBACKEXITBACKMENU
AUTO ADJUST
START
SYSTEM MENU
Note: 1. PC ADJUST is only active in PC  mode.
  2.  SOUND/  TIMER/  OSD  menu  in  PC/  HDMI  mode  is  the  same  as  TV/AV  mode,  please  refer    to                      
    pages 13~14.
ON-SCREEN MENU
LCD-CA9S-A NEW.indd   152/06/2008   2:08:13 PM
 
						

							16
Connect LCD TVs AC Power Cord into an AC outlet.2
1
3 BASIC OPERATION
TURNING ON / OFF LCD TV
Complete the peripheral connections before turning on LCD TV. (Please refer to CONNECTING LCD 
TV.)
Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The 
POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by 
status, the POWER indicator will become red. 
NO SIGNAL SHUT OFF
This TV set incorporates the NO SIGNAL SHUT OFF function. If no signal is input in TV mode, OFF 00:10 
will display for about 10 minutes and TV will be turned off automatically. 
SELECTING INPUT SOURCE
Select mode PC, HDMI2, HDMI1, TV, AV1-S, 
or AV2-DVD by pressing INPUT button on Remote 
Control or  on Side Controls.
CHANNEL SELECTION
DIRECT SELECTION
There are 256 channels can be selected on the LCD TV.
CHANNEL UP/ DOWN
Press POINT 
x
zbuttons on Side Controls or on Remote Controls to select programs.
OPress POINT 
x button to select next channel.
OPress POINT 
z button to select previous channel.
CHANNEL RECALL
Press CHANNEL RECALL button to switch between the previous channel and the current channel.
For example, now you are watching channel 4, but you watched channel 2 previously. If you press 
CHANNEL RECALL button, channel 2 will appear immediately.
PC
HDMI2
HDMI1
TV
AV1-S
AV2-DVDSOURCE
       : OK
For direct access to programmes using the (0-9) numeric button.
1) For selection of channel position 0 - 9. Example: For channel position 8, press the “8” button.
2) For selection of channel position 10 - 99. For channel position 25, press the DIGIT button to display - -, 
then press “2” and “5” buttons.
3) For selection of channel position 100 - 199. For channel position 125, press the DIGIT button  twice to 
display 1 - -, then press “2” and “5” buttons.
4) For selection of channel position 200 - 255. For channel position 235, press the DIGIT button  three    
times to display 2 - -, then press “3” and “5” buttons.
LCD-CA9S-A NEW.indd   162/06/2008   2:08:13 PM
 
						

							17
BASIC OPERATION
VOLUME
Press COLOUR SYSTEM button repeatedly to select AUTO, PAL, SECAM, NTSC or NTSC4.43
until the best colour effect is reached. 
50
This function is used to automatically adjust panels brightness by ambient brightness.
Press ECO button on Remote Control to set ECO ON or ECO OFF. 
SOUND SYSTEM
Press SOUND SYSTEM button repeatedly to select D/K, I, M or B/G until the best sound effect is 
reached.
COLOUR SYSTEM
DISPLAY
Press DISPLAY button on Remote Control to display the status of LCD TV. Press again to remove the dis-
play. 
VOLUME CONTROL
To adjust the volume value desired by pressing POINT 
{ 
y buttons on Remote Control or on Side 
Controls. The volume dialogue box will appear on the screen for a short while.
POINT 
y button to increase volume, and POINT 
{ button to decrease volume.
ECO
BASS EXPANDER
Press BASS button on Remote Control to set BASS EXPANDER ON or BASS EXPANDER OFF. 
  11
     AUTO
     D/K
    MONOColour System
Sound System
Channel
Stereo/Mono
LCD-CA9S-A NEW.indd   172/06/2008   2:08:14 PM
 
						

							18
User presets picture adjustment in Picture mode.
BASIC OPERATION
Simply press AUDIO MODE button on Remote Control to select the following audio signals: 
VIDEO MODE 
Simply press VIDEO MODE button on Remote Control to select the following video signals: 
AUDIO MODE 
STILL
Press STILL button to switch the still function On or Off.
When in PIP mode, still function can still main picture.
To cancel Still function:
Press STILL button or PIP button to cancel the function, or you can 
switch the input source to cancel it also.
Note:OWhen the still function is On, the picture will still, but the          
    sound will be remain.
OThe function doesnt work when the input signal is 1080p.           
STEREO/MONO
Simply press STEREO/MONO button to select the following audio signals: STEREO, MONO, NICAM, 
A  and B.
PERSONAL
STANDARD
DYNAMIC
SOFT
PERSONAL 
STANDARD
DYNAMIC
SOFT
STANDARD
NEWS
MUSIC
PERSONAL
Natural and splendid picture level preset on this LCD TV.
Bright and dynamic picture. It is suitable for nice playback, 
such as DVD  program.
Inhibit strong contrast and colour, it is beneficial for eye 
protection.
STANDARD
NEWS
MUSIC
PERSONAL
Normal sound state preset on LCD TV.
Select this mode for talk programs.
Select this mode for music programs.
Select this mode for user to call out the preset sound adjustment  
in SOUND menu.
STILL ON
LCD-CA9S-A NEW.indd   182/06/2008   2:08:14 PM
 
						

							19
BASIC OPERATION
COLORFUL WORLD
GREEN FIELD
SNOW WORLD
WATER WORLD
INDOOR SPORT
Select sports mode Colorful World, Green Field, Snow World, 
Water World and Indoor Sport by pressing SPORTS button 
repeatly on Remote Controls.
COLORFUL WORLD
Return to normal picture.
Use to watch football program, golf program or etc.
Use to watch skiing program or etc.
Use to watch swimming program, diving program or etc.
Use to watch basketball program, badminton program or etc.
WIDE
Select screen size among Full, Zoom, Zoom[Caption-IN], 
Normal and Natural Wide by pressing WIDE button on Remote 
Controls.
*  Only Full mode can be selected when the input mode is
      VGA  ,  HDMI  or  DVD  and  the  input  signal  is  1080i,  720p                   
 or 1080p.
Full
Zoom
Provides real 4 : 3 image on 16 : 9 screen.
Normal
Provides image to fit width of screen by expanding up/down/left/
right of image. This function is suitable to enjoy a normal video 
signal  (4 : 3 aspect ratio) with wide video aspect ratio of 16 : 9 
screen.Natural Wide
Provides image to fit screen size (16 : 9 aspect ratio) by 
expanding image width and height uniformly. This function can 
be used for enjoying a letter box mode picture (4 : 3 aspect 
picture with black bar on top and bottom edges) with wide video 
aspect of 16 : 9 screen.
Provides the image that is expanded as Zoom mode and 
moved up to show more image to include captions. This function 
can be used for enjoying a letter box picture with captions.
Provides image to fit width of screen by expanding image width 
uniformly. This function can be used for enjoying a squeezed 
video signal with wide video aspect ratio of 16 : 9 screen.
When your video equipment (such as DVD) has 16 : 9 output 
mode, select 16 : 9 and select Full to provide better quality.
Zoom [Caption-IN]
 Full
  Zoom
Zoom [Caption-IN]
Normal
Natural Wide
WIDE button
*
SPORTS
SPORTS  button
GREEN FIELD
SNOW WORLD
WATER WORLD
INDOOR SPORT
LCD-CA9S-A NEW.indd   192/06/2008   2:08:16 PM
 
						

							20
BASIC OPERATION
 OFF TIMER
To set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the 
screen for a short while.
To select 0 min, 30 min, 60 min, 90 min or 120 min with TIMER buttons.
Press PIP button to display sub picture.
During PIP mode, pressing the MAIN/SUB button will switch main and sub picture.
The sound on the main picture and the sub-picture also changes at the same time. Each time PIP button is pressed, the location of sub picture is changed as follows.
Press PIP button or POWER ON/OFF button to exit PIP mode.
PIP OPERATION
Using PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal at 
the same time.
Press CHANGE button in PIP mode can switch input source in Sub picture. (Refer to this page PIP 
Combination.
The following combination (Main and Sub picture) in the PIP mode,  indicates that it is possible for combination, 
and X indications that it is impossible for combination.
Note: DVD input terminal should be connected so that AV2-DVD in the following table can be combined with TV or AV1-S, 
otherwise it cannot be combined with TV or AV1-S.
Combination of the Main-picture and Sub-picture
PCMAIN
X
SUBHDMI 2 HDMI 1 TV AV1-S AV2-DVD
PC
HDMI 2
HDMI 1
TV
AV1-S
AV2-DVD
X
XX
X
X
XX
X
X
Note: The controls belongs to the picture which is TV input in PIP mode. Otherwise, it belongs to the main 
picture.
Main Picture Sub Picture
2
1
3
4
5
LCD-CA9S-A NEW.indd   202/06/2008   2:08:18 PM