Sanyo Pdg Det100jl Projector Specifications

							 
 
















  Specifications for PDG-DET100JL¢K£ 
Product Number  PDG-DET100JL¢K£ 
System DLP® 1-chip system 
Size 0.95 inch, Aspect Ratio 4:3 DLP® Chip Pixel Count 1,470,000 (1,400 x 1,050) 
Projection Lens Sold Separately 
Light Source  330W VIDITM UHP Lamp x 2 
Screen Size 
(Projection Distance) 
Minimum 50” - Maximum 600” 
(Projection distance differs by lens) 
Color Reproducibility  Full color (1.07 billion colors) 
Brightness*1 7,500 lumens*2 
Contrast Ratio*1 
(Full On/Full Off) 7,500:1*3 
Uniformity 90% 
Scanning Frequency  Horizontal: 15-120KHz, Vertical: 48-120Hz, Dot Clock: 230 MHz or less 
Resolution (resizing) 
(When using RGB signal) 1,400 x 1,050 (WUXGA and UXGA dot resizing possible, with analog RGB input) 
PC 
Input/Output Input 1: Digital video input (x 2) ; DVI-D x 1 (HDCP compatible), 
              HDMI x 1 (Ver 1.3 (Deep color)) 
Analog RGB input (x 1) ; D-sub 15-pin x 1 
Input 2: BNC x 5 (RGBHV, VIDEO/Y-Pb/Cb-Pr/Cr), S-video x 1 
Input 3: Expansion slot (empty) 
Input 4: RJ45 LAN x 1, Serial D-sub9-pin IN x 1   
(Expansion slot: POA-MD13NET2) 
Te r m i n a l s  
Controller 
input/output, 
and other Monitor output ; D-sub15-pin x 1 (Analog RGB, Y-Pb/Cb-Pr/Cr, VIDEO) 
Serial port ; D-sub9-pin IN x 1 / OUT x 1 
Wired remote control port ; Mini-jack x 1 
Service port ; USB type B x 1 
Power Consumption 848W (Standby: 27W) (without options) 
Power Source  AC 100V (±10Ë), 50/60 Hz 
Dimensions  400.0mm (w) x 242.5mm (h) x 523.5mm (d)   
Weight  19.8kg (not including the lens) 
Main Accessories 
Rich color reproduction color wheel set x 1*4 
Wireless (wired incl.) remote control x 1 (AA battery x 2) 
Cable cover 1-type (support cover x 1, cover x 1) 
Removable power cord x 1, Fixing bracket for power cord x 1 
Computer cable (D-sub type) x 1 
Real Color Manager Pro (CD-ROM), 
Owner’s manual x 1, Warranty x 1 
Lens hole cover x 1 
PIN code-locking seal x 1 
 
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. 
 Measurement method/conditions are based on Appendix 2. 
*2 Brightness when using the LNS-S50 lens, with rich color reproduction color wheel installed, in image mode “Dynamic”, and with 
‘DynamicBlack
TM’ setting “Off” 
*3 With ‘DynamicBlackTM’ setting “High” 
*4 The color wheel set optimized for high brightness is installed in projector at time of shipping. 
*‘DLP’ is a registered trademark and ‘DynamicBlack’ is a trademarks of Texas Instruments.
  
						

							



Specifications for LP-WTC500L (W) 
Product Number LP-WTC500L(W) 
System  RGB liquid crystal shutter projection system 
Size 0.95 inch x 3, Aspect Ratio 16:10 LCD Panel Pixel Count 1,024,000 (1,280 x 800) x 3 ; Total pixels 3,072,000 
Projection Lens  Sold Separately 
Light Source 330W NSHA Lamp (1 lamp + 1 lamp) 
Screen Size 
(Projection Distance) Minimum 30” - Maximum 300” 
(approx.1.3 to 10.5m) (Projection distance differs by lens) 
Color Reproducibility Full color (16.77 million colors) 
Brightness*1 5,000 lumens*2 
Contrast Ratio (Full On/Full 
Off)*1 3000:1*3 
Uniformity 90% 
Sound Output (Speakers) 3.0 W + 3.0 W Stereo Speakers (Φ 5 x 9cm x 2) 
Scanning Frequency  Horizontal: 15-100KHz, Vertical: 50-100Hz, Dot Clock: 140MHz or less (analog) 
Resolution (resizing) 
(When using RGB signal) 1,280 x 800 (UXGA dot resizing possible) 
PC 
Input/Output Analog RGB input (x 2) ; Mini D-sub 15-pin x 1, BNC 5-type 
Digital RGB input ( x 1) ; HDMI x 1 (Ver 1.3 (Deep color)) 
Analog RGB output x 1 ; Mini D-sub 15-pin x 1 
Audio input (x 2) ; Stereo mini-jack x 2 (Computer / Component) 
Video/Audio 
Input/Output Video x 3 ; RCA input, BNC 3-type (same as PC input terminal), S-Video 
Audio input x 2 ; RCA 2-type 
Audio monitor output x 1 ; Stereo mini jack x 1 (can be used with either computer or 
video, variable) Te r m i n a l s  
Controller 
input/output, 
and other Control port ; D-sub 9-pin x 1 
Service port ; USB type B x 1 
Wired remote control port ; Mini-jack x 1 
PJ Net Organizer Connector x 1 
Operating Temperature 5 - 40°C 
Power Source  AC 100 (±10Ë), 50/60 Hz 
Power Consumption 530W (Standby: 14W) 
Dimensions    451.0mm (w) x 175.0mm (h) x 550.1mm (d) 
We i g h t  14.7 kg (not including the lens) 
Main Accessories Wireless (wired incl.) remote control (AAA battery x 2) 
Removable power cord x 1 
Power plug adapter 
Computer cable (D-sub type) x 1 
USB cable x 1 
Owner’s manual x 1, Warranty x 1 
Lens hole cover x 1 
PIN code-locking seal x 1 
Customer service contact list x 1 
 
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. 
 Measurement method/conditions are based on Appendix 2. 
*2 Brightness when using the LSN-S11 lens 
*3 When Lamp control “Auto 2” mode is selected 
* All product names and company names are trademarks or registered trademarks of their respective companies. 
* Product appearance and specifications are subject to change without notice.