Sanyo Pdg Det100l Projector User Manual

							61
Factory default
This function returns all setting values except for the user logo, 
PIN code lock, Logo PIN code lock, lamp counter, filter counter 
and filter timer to the factory default settings. Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box 
appears. Select [Yes], and the next 
box appears. 
Test pattern
Various test patterns are available for use when setting up the 
projector.
Set the red frame pointer 
to the item and press the 
SELECT button.
Setting
Select [Yes] to 
activate it.
Filter counter
This function is used to set a time for the filter replacement.
Use the Point ed buttons to move the red frame pointer to Filter 
counter and then press the SELECT button. A dialog box appears 
showing the Used time option and the Scrolls remaining option. 
  Used Time  . . . . . .  Show the total accumulated time of the 
filter use, timer setting option and the Reset 
options.  When the projector reaches a time 
set in the timer setting, the Filter replacement 
icon (Fig. 1) appears on the screen and the 
total accumulated time turns red, indicating 
that the filter replacement is necessary. If 
the filter is out of scroll and the projector 
reaches a time set in the timer setting, Fig. 
2 appears on the screen, indicating that the 
filter cartridge replacement is necessary.
 
Scrolls remaining. .  Show the scroll counter and the Reset 
options. When the filter scroll is counted 
down to 1 (Scroll counter on the screen is 
showing “0 scroll(s)” , the last scroll icon 
(Fig. 3) appears on the screen. When the 
filter scroll is counted down to 0, the Filter 
cartridge replacement icon (Fig. 4) appears 
on the screen and the WARNING FILTER 
indicator lights orange, indicating that the 
filter cartridge replacement is necessary.
To set a timer, press the SELECT button on Used time option. 
Move the red arrow pointer to the timer setting option and use 
the Point 7 8 buttons to select from (Off/1000H/2000H/3000H) 
depending on the use environment.
When replacing the Filter cartridge, reset the Filter counter and the 
Scroll counter (p.64). Filter counter
Set the red frame pointer 
to the item and press the 
SELECT button.
Off
Fig .1   Filter replacement icon
Filter replacement icon appears on the screen 
at a set time.
Filter cartridge replacement icon appears on 
the screen when the filter scroll is counted 
down to 0 scroll.
Last scroll icon appears on the screen when 
the filter is down to the last scroll.
Fig .4   Filter cartridge replacement icon
Fig .3   Last scroll icon Fig .2
✔Note: 
• Do not reset the Filter counter and the Scroll counter 
without replacing the Filter cartridge. Be sure to reset the 
Filter counter and the Scroll counter only after replacing 
the Filter cartridge.
  • Timer setting notifies that the filter needs replacement. To 
replace the filter, use the filter control function (p.56).
✔Note:  •   Fig.1,  Fig.  2,  Fig.  3  or  Fig.  4  will  appear  at 
turning on and selecting input source.
  •   Fig.1,  Fig.  2,  Fig.  3  or  Fig.  4  will  not  appear 
when  the  Display  function  is  set  to  “Off” 
(p.49), or during “Freeze” (p.30).
  •   If  the  filter  cartridge  is  not  inst alled  in  the 
p r o j e c t o r,   ' F i l t e r   c o u n t e r '   i s   d i s p l aye d   i n 
grayout. 
						

							62
Maintenance and Care
Filter Instructions
Filter prevents dust from accumulating on the optical elements inside the projector\
. Should the filter becomes 
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup 
and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to 
replace the filter easily. The projector monitors the condition of the filter at all time and replac\
es a filter with a 
new one automatically when it detects the clogging. 
If the projector reaches a time set in the timer setting (p.61), 
a Filter replacement icon (Fig.1) appears on the screen and 
the WARNING FILTER indicator on the top panel lights up 
(p.79). When you see this icon, replace the filter as soon 
as possible (pp.31, 56). If the filter is out of scroll and the 
projector reaches a time set in the timer setting, Fig. 2 
appears on the screen, indicating that the filter cartridge 
replacement is necessary.
When the filter scroll is counted down to 1, the Last scroll 
icon (Fig.3) appears on the screen, indicating that there is 
one scroll left in the filter cartridge (p.61).
If the projector detects that the filter is clogged and no scroll 
is left in the filter cartridge, a Filter cartridge replacement 
icon (Fig. 4) appears on the screen and the WARNING 
FILTER indicator on the top panel lights up (p.79). When you 
see this icon, replace the filter cartridge (p.63) and reset the 
Filter counter (p.64) and the Scroll counter (p.64).
When the filter is being scrolled by the remote control (p.31) 
or the Filter control function in the setting menu (p.56), a 
Filter replacement icon and “Please wait...” message (Fig.5) 
appear on the screen and the WARNING FILTER indicator 
blinks slow (approx. 2 seconds ON, 2 seconds OFF) (p.77).
The WARNING FILTER indicator blinks fast when the 
projector detects an abnormal condition, the filter cartridge 
is not installed properly, or the filter scroll is not working 
properly (p.79).
Fig .1   Filter replacement icon
Fig .4    Filter cartridge replacement icon
Fig .3   Last scroll icon
✔Note:
• Fig.1, Fig.2, Fig.3 or Fig. 4 will not appear when the Display 
function is set to “Off” (p.49), or during “Freeze” (p.30).
•  The filter cannot be rewound.
•  The filter can be scrolled 9 times since the filter cartridge has 
10 scrolls. 
•  The filter cartridge is disposable. Do not clean and reuse the 
filter cartridge.
•  Do not expose the filter cartridge to water or liquid, or it may 
cause a breakdown.
•  Replace the filter cartridge after all the scroll is used up. If you 
replace the filter cartridge when there are some scrolls left in 
the filter cartridge, the filter counter and the scroll counter do 
not recognize the correct number of remaining scrolls and the 
reset function cannot work properly. It may cause a breakdown.
•  The used part of the filter can be seen on the edge of the Filter 
cartridge after scrolling the filter, but there is no problem for the 
use of the projector.
Fig .5    Filter replacement icon and 
“Please wait...” message. 
• Do not use the filter cartridge with other projector. The filter 
counter and the scroll counter do not recognize the correct 
number of remaining scrolls of the used filter cartridge and the 
reset function cannot work properly. It may cause a breakdown.
•  Make sure that the projection lamps are turned off when you 
are replacing the filter cartridge. If you replace the filter cartridge 
when the projection lamps are turned on, the projector will be 
shut down automatically for safety purposes.
•  Do not forget to reset the filter counter and the scroll counter in 
the setting menu after replacing the filter cartridge. If you forget 
to reset the filter counter and the scroll counter, the projector 
cannot recognize the correct number of remaining scrolls and it 
may cause a breakdown. 
•  When the projector is kept used for 3 minutes without getting 
the filter cartridge replaced after the Fig.4 appears on the screen, 
the projector is turned off automatically to prevent the damage of 
optical components.
Fig .2 
						

							63
Turn off the projector, press the Main On/Off Switch to 
Off and unplug the AC power cord from the AC outlet.
First, clean up the dust on the projector and around the 
air vents.
1
2
Open the filter cover. (See the right figure.)3
Put the new one back into the position and close 
the filter cover. Make sure that the filter cartridge is 
properly and fully inserted.5
CAUTION
-  Do not put anything into the air vents. Doing so 
may result in malfunction of the projector.
-   In the event of installation/replacement of the 
filter cartridge, turn off the projector, press the 
Main On/Off Switch to Off and unplug the AC 
power cord from the AC outlet.
4
Reset the filter counter and the scroll counter (p.64).
6
Replacing the Filter Cartridge
Pull out the filter cartridge. When taking out 
the filter cartridge, put your finger on the filter 
cartridge’s tab and then pull.
RECOMMENDATION
w e recommend avoiding dusty/smoky environments when 
operating the projector  . Usage in these environments may 
cause a poor image quality  .
When using the projector under dusty or smoky conditions, dust 
may accumulate on a lens or optical elements inside the projector. 
Such condition may degrade the quality of the projected image.
When the symptoms above are noticed, contact your authorized 
dealer or service station for proper cleaning.
ORDER REPLACEMENT FILTER CARTRIDGE
Replacement  filter  cartridge  can  be  ordered  through  your 
dealer. When  ordering,  give  the  following  information  to  the 
dealer.
 l   Model No  . of your projector
      PDG-DET100L
 l  Replacement Filter Cartridge 
      Type No  . : POA-FIL-131
                       
(Service Parts Code: 610 334 3747)
Connect  the  AC  power  cord  to  the  projector  and  turn 
on the projector.
7
Maintenance and Care
Filter cover
Filter cartridge
Tab 
						

							64
Be sure to reset the Scroll counter after replacing the filter 
cartridge. 
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to 
Filter counter and then press the SELECT button. A dialog 
box appears showing the Used time option and the Scrolls 
remaining option. Use the Point ed buttons to select 
Scroll(s) remaining.
1
2
Resetting the Scroll CounterScroll counter
Another confirmation dialog box appears, select [Yes] to 
reset the Scroll counter.
3Scroll(s) remaining shows the number of the remaining 
scrolls and the Reset option. Select Reset and the “Scroll 
counter Reset?” appears. Select [Yes] to continue.
4
Be sure to reset the Filter counter after replacing the filter 
cartridge. 
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to 
Filter counter and then press the SELECT button. 
A dialog box appears showing the Used time option and the 
Scrolls remaining option. Use the Point ed buttons to select  
Used time.
1
2
Resetting the Filter Counter
Filter counter
Select Reset and the “Filter 
counter Reset?” appears.
Select [Yes], 
then another 
confirmation 
box appears.
Select [Yes] again to reset 
the Filter counter.
Another confirmation dialog box appears, select [Yes] to 
reset the Filter counter.
3Used time shows the total accumulated time of the filter 
use, a timer setting option, and the Reset option. Select 
Reset and the “Filter counter Reset?” appears. Select [Yes] 
to continue.
4
Off
Select “Used time” and the 
dialogue box below appears.
Select “Scrolls remaining” and 
the dialogue box below appears.
Select Reset and the “Scroll 
counter Reset?” appears.
Select [Yes], 
then another 
confirmation 
box appears.
Select [Yes] again to reset 
the Scroll counter.
Maintenance and Care 
						

							65
Lamp Management
This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled \
by 
the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the 
status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp 
Mode when any of lamps is out for the end of life or malfunctions. Projection Lamp lights normally.
Lamp 1/2 Replace Indicators
The LAMP 1/2 REPLACE indicators light orange when any of Projection Lamps is nearing its end, and flash 
when any of them becomes out. Check the number of lamp on the Lamp Status Display or the LAMP 1/2 
REPLACE indicators and replace the lamp.yellow Lamp
Dim Lamp
X Mark on Lamp Red Lamp
LAMP 1/2 REPLACE
INDICATORS
Projection Lamp is turned off. Projection Lamp is nearing its end. When the image 
becomes darker or the color becomes unnatural, 
replace lamp. (LAMP 1/2 REPLACE indicator lights 
orange.) (LAMP 1/2 REPLACE indicator flashes orange.)
Projection lamp is defective or fails to be turned on. 
Restart the projector on, and make sure lamp is on. 
If this mark still appears, replace lamp corresponding 
with number marked X.
LAMP STATUS
DISPLAY
Lamp Mode Changeover
The Lamp Management Function automatically changes the lighting lamp (Lamp Mode) by detecting the status of lamp. 
When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1 
lamp manually. Refer to the SETTING section on page 50
.
2 LAMP MODE 1 LAMP MODE
When Lamp 2 is burnt out.
Lamp Status Display
The Lamp Status Display appears on screen when the projector is turned on or the input position (input 1, input 
2, Input 3 or input 4) is switched. This shows the status of each lamp as; ON, OFF, NEAR END, or OUT. Refer to 
the following for each status.
Lamp status
Maintenance and Care
When Lamp 1 is burnt out. 
						

							66
Maintenance and Care
Check the number of lamp to be replaced on the Lamp 
Status Display.
Loosen a screw on the Lamp Cover. Slide and open the 
Lamp Cover. (See the right figure.)1
3
Loosen two screws and pull out the Lamp to be replaced 
by grasping handle.4
Turn off the projector, press the Main On/Off Switch to Off 
and unplug the AC power cord from the AC outlet. Let the 
projector cool for at least 45 minutes.2
Replace the Lamp with a new one and tighten two 
screws. Make sure the Lamp is set properly.
6
Follow these steps to replace the lamp.Put the Lamp Cover back and tighten a screw. 
5
SCREW LAMP 
COVER
SCREWS
Make sure which number of lamp needs to be 
replaced on Lamp Status Display.
Figure shows case of replacing LAMP 2.
LAMP 1
LAMP 2
CAUTION :   DO NOT OPERATE THE PROjECTOR  wHILE ANy OF LAMPS IS REMOVED  . IT MA y RESULT IN 
MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS  .
NOTES ON LAMP REPLACEMENT
To  maintain  quality  of  picture  (better  balance  of  color  and  brightness  in  entire  screen),  we 
recommend replacing both 2 lamps at a time . 
Lamp Replacement
For continued safety, replace with a lamp assembly 
of the same type.
Do not drop the lamp assembly or touch a glass 
bulb! The glass can shatter and may cause injury.
Allow the projector to cool, for at least 45 minutes 
before you open Lamp Cover. The inside of the 
projector can become very hot.
CAUTION
TURN OFF THE UV LAMP BEFORE 
OPENING THE LAMP COVER.
w
ARNING:
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the 
screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing 
when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.Indicators
LAMP 1 / 2 REPLACE indicators Lamp replacement icon
✔Note:
 
• The Lamp replacement icon will not appear 
when the Display function is set to “Off” (p.49), 
or during “Freeze” (p.30). 
						

							67
This projector uses a high-pressure lamp which must be handled carefully and properly. 
Improper handling may result in accidents, injury, or create a fire hazard.
l Lamp  lifetime  may  differ  from  lamp  to  lamp  and  according  to  the  environment  of  use. There  is  no 
guarantee  of  the  same  lifetime  for  each  lamp.  Some  lamps  may  fail  or  terminate  their  lifetime  in  a 
shorter period of time than other similar lamps.
l If  the  projector  indicates  that  the  lamp  should  be  replaced,  i.e.,  if  the  LAMP  1/2  REPLACE  indicators 
light up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow 
carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp 
with the LAMP 1/2 REPLACE indicators lighted may increase the risk of lamp explosion.
l Lamp  may  explode  as  a  result  of  vibration,  shock  or  degradation  as  a  result  of  hours  of  use  as  its 
lifetime  draws  to  an  end.  Risk  of  explosion  may  differ  according  to  the  environment  or  conditions  in 
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLO wING SAFETy PRECAUTIONS SHOULD BE TAKEN .
If  a  lamp  explodes,  disconnect  the  projector’s  AC  plug  from  the  AC  outlet  immediately.  Contact  an 
authorized  service  station  for  a  checkup  of  the  unit  and  replacement  of  the  lamp.  Additionally,  check 
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out 
from  the  cooling  air  circulation  holes.  Any  broken  shards  found  should  be  cleaned  up  carefully.  No  one 
should  check  the  inside  of  the  projector  except  those  who  are  authorized  trained  technicians  and  who 
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those 
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken 
glass.
          LAMP HANDLING PRECAUTIONS
Maintenance and Care
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following 
information to the dealer.
 l  Model No  . of your projector    :  PDG-DET100L
 l  Replacement Lamp Type No  . :  POA-LMP130
               (Service Parts No. 610 343 5336) 
						

							68
Maintenance and CareOptional Color Wheel Installation
The projector comes with the high brightness color 
wheels installed. Additional rich color reproduction 
color wheels are supplied. To replace the color wheels, 
refer to the following steps.
✔Note:
•  Wait until the lamp house and the color wheel cool off.
•   Make  sure  to  install  the  same  type  of  two  color  wheels  at 
the  same  time.  When  different  types  of  color  wheels  are 
installed,  ‘Non-matching  color  wheels!‘  message  appears 
on the screen.
Allow the projector to cool, for at least 45 minutes 
before you open Lamp Cover. The inside of the 
projector can become very hot.
Loosen a screw on the Lamp Cover. Slide and open the 
Lamp Cover. (See the right figure.)
1
3
Loosen three screws and pull out the color wheel to be 
replaced by grasping handle.
4
Turn off the projector, press the Main On/Off Switch to Off 
and unplug the AC power cord from the AC outlet. Let the 
projector cool for at least 45 minutes.
2
Replace the color wheel with a new one and tighten three 
screws. Make sure the color wheels are set properly.
Put the Lamp Cover back and tighten a screw. 
5
SCREW
LAMP 
COVER
SCREWS
COLOR WHEELS 
						

							69
Turn off the projector, press the Main On/Off Switch to Off 
and unplug the AC power cord from the AC outlet before 
cleaning.
Gently wipe the projection lens with a cleaning cloth that 
contains a small amount of non-abrasive camera lens 
cleaner, or use a lens cleaning paper or commercially 
available air blower to clean the lens. 
Avoid using an excessive amount of cleaner. Abrasive 
cleaners, solvents, or other harsh chemicals might scratch 
the surface of the lens.
Cleaning the Projector Cabinet
Turn off the projector, press the Main On/Off Switch to Off 
and unplug the AC power cord from the AC outlet before 
cleaning.
Gently wipe the projector body with a soft dry cleaning 
cloth. When the cabinet is heavily soiled, use a small amount 
of mild detergent and finish with a soft dry cleaning cloth. 
Avoid using an excessive amount of cleaner. Abrasive 
cleaners, solvents, or other harsh chemicals might scratch 
the surface of the cabinet.
When the projector is not in use, put the projector in 
an appropriate carrying case to protect it from dust and 
scratches.
Cleaning the Projection LensMaintenance and Care
CAUTION
Do not use any flammable solvents or air sprays 
on the projector and in its vicinity. The explosion or 
fire hazard may occur even after the AC power cord 
is unplugged because the temperature inside the 
projector is extremely high due to the lamps. 
In addition, there is a risk that the internal parts 
may be damaged not only by the flammable air 
spray but also by the cold air. 
						

							70
The WARNING indicators show the state of the function which protects the projector. Check the state of the 
WARNING TEMP. indicator and the LAMP indicator to take proper maintenance. 
Warning Indicators
The projector is shut down and the WARNING TEMP. 
indicator is blinking red.
When the temperature inside the projector reaches a 
certain level, the projector will be automatically shut down 
to protect the inside of the projector. The LAMP indicator 
turns red brighter and the WARNING TEMP indicator 
blinks while the projector is being cooled down. When the 
projector has cooled down enough (to its normal operating 
temperature), it can be turned on again by pressing the ON/
STAND-BY button.
✔Note:
• The WARNING TEMP. indicator continues to blink even after 
the temperature inside the projector returns to normal. When 
the projector is turned on again, the WARNING TEMP. indicator 
stops blinking. 
Then check the matters below:
–   Did you provide appropriate space for the projector to be 
ventilated? Check the installing condition to see if the air 
vents of the projector are not blocked.
–   Has the projector been installed near an Air-Conditioning/ 
Heating Duct or Vent? Move the installation of the 
projector away from the duct or vent.
–   Is the filter clean? Replace the filter with a new one.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE 
AC POWER CORD CONNECTED UNDER AN 
ABNORMAL CONDITION. IT MAY RESULT IN FIRE 
OR ELECTRIC SHOCK.
Indicators
Indicators
w ARNING TEMP  .
blinking red
Maintenance and Care
The projector is shut down; and the LAMP indicator is 
lighting and other indicators are blinking.
When the projector detects an abnormal condition, it 
will be automatically shut down to protect the inside of 
the projector and the LAMP indicator lights on and other 
indicators blink. In this case, unplug the AC power cord and 
plug it, and then turn on the projector once again to verify 
operation. If the projector cannot be turned on and these 
indicators are still lighting and blinking, unplug the AC power 
cord and contact the service station.
LAMP indicator lights on 
and other indicators blink .