Sanyo Pdg Dsu30 Projector User Manual

Multimedia Projector
MODEL PDG-DSU30
Owner's Manual 

English
1
English
Table of Contents
Table of Contents
Usage Notice
Precautions ............................................................2
Introduction
Product Features  ...................................................5
Package Overview .................................................6
Product Overview  ..................................................7
Connection Ports ................................................8
Remote Control ...................................................9
Remote...

2
English
Usage Notice
Precautions
 
Follow all warnings, precautions and maintenance as recom-
mended in this user’s guide to maximize the life of your unit.
■ Warning-This apparatus must be earthed.
■ Warning-Do not look into the projector’s lens when the 
lamp is on.  The bright light may hurt your eyes.
■ Warning-To reduce the risk of fire or electric shock, do not 
expose this projector to rain or moisture.
■ Warning-Please do not open or disassemble the projector 
as this may cause electric shock....

English
3
English
Usage Notice
■ Warning-Allowing the proper amount of space on the 
top, sides, and rear of the projector cabinet is 
critical for proper air circulation and cooling of 
the unit. The dimensions shown here indicate the 
minimum space required. If the projector is to be 
built into a compartment or similarly enclosed, 
these minimum distances must be maintained.
1.5 (50 cm)
3 (1 m) 1.5 (50 cm) 1.5 (50 cm)
SIDE and TOP
REAR
■ Warning-Avoid positioning the projector as described 
below when...

4
English
Usage Notice
  Do:
■   Turn off the product before cleaning.
■   Use a soft cloth moistened with mild detergent to clean the 
display housing.
■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
  Do not:
■   Block the slots and openings on the unit provided for ventila-
tion.
■   Use abrasive cleaners, waxes or solvents to clean the unit.
■   Use under the following conditions:
-   Extremely heat, cold or humidity.
-   In areas susceptible...

English
5
English
Introduction
Product Features
 
This product is a SVGA single chip 0.55” DLP® projector. Out-
standing features include:
	■  True SVGA, 800 x 600 addressable pixels
 ■ Single chip DLP® technology
 ■  NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/
SECAM (B/D/G/K/K1/L) and SDTV(480i/576i), 
EDTV(480p/576p), HDTV(720p/1080i/1080p) compat-
ible
 ■   Multi-Auto functions: Auto detection, Auto image and 
Auto saving the adjustments
 ■ Full function remote control
 ■ User friendly multilingual on...

6
English
Introduction
Power Cable VGA Cable
Wireless Remote ControlProjector with lens cap
Package Overview
This projector comes with all the items shown below. Check to 
make sure your unit is complete. Contact your dealer immedi-
ately if anything is missing.
	Due to the differ-ence in applications for each country, some regions may have dif-ferent accessories.
Note
Documentation: 
	CD-ROM User’s Manual
	Quick Reference Guide
CableFactory code
AC Power Cable (for U.S.A.)42.00105G011
AC Power Cable...

English
7
English
Introduction
1. ON/STAND-BY button and LED indicator
2. Remote Sensor
3. Zoom Ring
4. Ventilation (inlet)
5. Speaker
6. Focus Ring
7. Ventilation (outlet)
8.  Lens
9. Lens Cap
Product Overview
Air Flow
1
2
3
4
5
7
7
68
4
9 

8
English
Introduction
Connection Ports
1.   COMPUTER IN/COM-
PONENT IN Connector
2. S-VIDEO IN Connector
3. VIDEO IN Connector
4. SERVICE Port
5.   MONITOR OUT Con-
nector
6. AUDIO IN Jack
7. AC IN
8. KensingtonTM Lock 
12346
78
5 

English
9
English
Introduction
Remote Control
1Infrared trans-
mitter
Sends signals to the projector.
2IMAGESelect the Image mode from Presen-
tation, Bright, Movie, sRGB, Black-
board, Classroom, User1 and User2.
3ON/STAND-
BY
Refer to the “Power On/Off the Pro-
jector” section. (See pages 14~15)
4COMPUTERPress “COMPUTER” to choose Com-
puter in/Component in connector.
5FREEZEPause the screen image. Press again to 
resume the screen image.
6ENTERConfirm your section of items in sub 
menu operation.
3
4...