Home > Sanyo > Projector > Sanyo Plc Ef30nl Projector User Manual

Sanyo Plc Ef30nl Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sanyo Plc Ef30nl Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Owner’s Manual
    PLC-EF30N
    Multimedia Projector
    MODEL  
    						
    							2
    CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-
    SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.  REFER SERVICING TO QUALIFIED
    SERVICE PERSONNEL.
    THIS SYMBOL INDICATES THAT DANGEROUS
    VOLTAGE CONSTITUTING A RISK OF ELECTRIC
    SHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
    OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
    OWNERS MANUAL WITH THIS UNIT.
    CAUTION
    RISK OF ELECTRIC SHOCK
    DO NOT OPEN
    Before operating this projector, read this manual thoroughly and operate the projector properly.  
    This projector provides many convenient features and functions.  Operating the projector properly enables you to
    manage those features and maintains it in better condition for a considerable time.
    Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
    accidents.
    If your projector seems to operate improperly, read this manual again, check operations and cable connections and try
    the solutions in the “Trouble-shooting” section of the end of this booklet.  If the problem still persists, contact the sales
    dealer where you purchased the projector or the service center.
    TO THE OWNER
    SAFETY PRECAUTIONS
    WARNING :  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
    RAIN OR MOISTURE.
    This projector produces intense light from the projection lens.  Do not stare directly into the lens as possible.
    Eye damage could result.  Be especially careful that children do not stare directly into the beam.
    This projector should be set in the way indicated.  If not, it may result in a fire hazard.
    Take appropriate space on the top, sides and rear of the projector
    cabinet for allowing air circulation and cooling the projector.
    Minimum distance should be taken.  If the projector is to be built
    into a compartment or similarly enclosed, the minimum distances
    must be maintained.  Do not cover the ventilation slot on the
    projector.  Heat build-up can reduce the service life of your
    projector, and can also be dangerous.
    Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation
    holes.
    Remote Control Unit, supplied to this projector, emits the laser beam as the laser pointer function from Laser
    Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate
    laser emission).  Do not look into Laser Light Window or shine the laser beam on yourself or other people.  Eye
    damage may result.
    If the projector is not to be used for an extended time, unplug the projector from the power outlet.
    READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
    20cm
    50cm 50cm
    1m
    SIDE and TOPREAR 
    						
    							3
    SAFETY INSTRUCTIONS
    All the safety and operating instructions should be read before
    the product is operated.
    Read all of the instructions given here and retain them for later
    use.  Unplug this projector from AC power supply before
    cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
    cloth for cleaning.
    Follow all warnings and instructions marked on the projector.
    For added protection to the projector during a lightning storm,
    or when it is left unattended and unused for long periods of
    time, unplug it from the wall outlet.  This will prevent damage
    due to lightning and power line surges.
    Do not expose this unit to rain or use near water... for
    example, in a wet basement, near a swimming pool, etc...
    Do not use attachments not recommended by the
    manufacturer as they may cause hazards.
    Do not place this projector on an unstable cart, stand, or table.
    The projector may fall, causing serious injury to a child or
    adult, and serious damage to the projector.  Use only with a
    cart or stand recommended by the manufacturer, or sold with
    the projector.  Wall or shelf mounting should follow the
    manufacturers instructions, and should use a mounting kit
    approved by the manufacturers.
    An appliance and cart combination should
    be moved with care.  Quick stops,
    excessive force, and uneven surfaces
    may cause the appliance and cart
    combination to overturn.
    Slots and openings in the back and bottom of the cabinet are
    provided for ventilation, to insure reliable operation of the
    equipment and to protect it from overheating.
    The openings should never be covered with cloth or other
    materials, and the bottom opening should not be blocked by
    placing the projector on a bed, sofa, rug, or other similar
    surface.  This projector should never be placed near or over a
    radiator or heat register.
    This projector should not be placed in a built-in installation
    such as a book case unless proper ventilation is provided.
    Never push objects of any kind into this projector through
    cabinet slots as they may touch dangerous voltage points or
    short out parts that could result in a fire or electric shock.
    Never spill liquid of any kind on the projector.This projector should be operated only from the type of power
    source indicated on the marking label.  If you are not sure of
    the type of power supplied, consult your authorized dealer or
    local power company.
    Do not overload wall outlets and extension cords as this can
    result in fire or electric shock.  Do not allow anything to rest on
    the power cord.  Do not locate this projector where the cord
    may be damaged by persons walking on it.
    Do not attempt to service this projector yourself as opening or
    removing covers may expose you to dangerous voltage or
    other hazards.  Refer all servicing to qualified service
    personnel.
    Unplug this projector from wall outlet and refer servicing to
    qualified service personnel under the following conditions:
    a. When the power cord or plug is damaged or frayed.
    b. If liquid has been spilled into the projector.
    c. If the projector has been exposed to rain or water.
    d. If the projector does not operate normally by following the
    operating instructions.  Adjust only those controls that are
    covered by the operating instructions as improper
    adjustment of other controls may result in damage and will
    often require extensive work by a qualified technician to
    restore the projector to normal operation.
    e. If the projector has been dropped or the cabinet has been
    damaged.
    f. When the projector exhibits a distinct change in
    performance-this indicates a need for service.
    When replacement parts are required, be sure the service
    technician has used replacement parts specified by the
    manufacturer that have the same characteristics as the
    original part.  Unauthorized substitutions may result in fire,
    electric shock, or injury to persons.
    Upon completion of any service or repairs to this projector, ask
    the service technician to perform routine safety checks to
    determine that the projector is in safe operating condition.
    Voor de klanten in Nederland
    Bij dit product zijn batterijen
    geleverd.  
    Wanneer deze leeg zijn,
    moet u ze niet weggooien
    maar inleveren als KCA. 
    						
    							4
    COMPLIANCES
    AC Power Cord for the United Kingdom :
    This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin
    face of the plug.  Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the
    same rating, marked thus  .  If the fuse cover is detachable, never use the plug with the cover omitted.  If a
    replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
    (i.e. red or orange).  Fuse covers are available from the Parts Department indicated in your User Instructions.
    If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
    The end of the flexible cord should be suitably prepared and the correct plug fitted.  (See Over)
    WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
    OUTLET.
    The Wires in this mains lead are coloured in accordance with the following code:
    Green-and-yellow ············ Earth
    Blue ································· Neutral
    Brown ······························ Live
    As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
    identifying the terminals in your plug proceed as follows:
    The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked
    by the letter E or by the safety earth symbol  or coloured green or green-and-yellow.
    The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
    coloured black.
    The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
    coloured red.
    WARNING : THIS APPARATUS MUST BE EARTHED.
    ASA
    The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
    AC Power Cord for the United States and Canada :
    AC Power Cord used in the United States and Canada is listed by the Underwriters
    Laboratories (UL) and certified by the Canadian Standard Association (CSA).
    AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure
    that the plug will fit into the power outlet.  Do not try to defeat this safety feature.
    Should you be unable to insert the plug into the outlet, contact your electrician.
    GROUND
    THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
    AC POWER CORD REQUIREMENT
    Federal Communication Commission Notice
    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
    15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when
    the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
    frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
    interference to radio communications.  Operation of this equipment in a residential area is likely to cause harmful
    interference in which case the user will be required to correct the interference at his own expense.
    Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.  If such
    changes or modifications should be made, you could be required to stop operation of the equipment. 
    						
    							5
    TABLE OF CONTENTS
    FEATURES AND DESIGN 6
    BEFORE OPERATION 16COMPUTER MODE 25
    VIDEO MODE 34
    SETTING 39
    APPENDIX 42 PREPARATION 7
    NAME OF EACH PART OF PROJECTOR 7
    SETTING-UP PROJECTOR 8
    CONNECTING AC POWER CORD 8
    LENS INSTALLATION 9
    POSITIONING PROJECTOR 9
    LENS SHIFT ADJUSTMENT 9
    PICTURE LEVEL AND TILT ADJUSTMENT 10
    MOVING PROJECTOR 10
    CONNECTING PROJECTOR 11
    TERMINALS OF PROJECTOR 11
    CONNECTING TO COMPUTER 14
    CONNECTING TO VIDEO EQUIPMENT 15
    TOP CONTROLS AND INDICATORS 16
    OPERATION OF REMOTE CONTROL 17
    LASER POINTER FUNCTION 17
    REMOTE CONTROL BATTERIES INSTALLATION 18
    OPERATING ON-SCREEN MENU 19HOW TO OPERATE ON-SCREEN MENU 19
    FLOW OF ON-SCREEN MENU OPERATION 19
    MENU BAR 20
    SELECTING INPUT SOURCE 25
    SELECTING COMPUTER SYSTEM 25
    COMPATIBLE COMPUTER SPECIFICATIONS 27
    PC ADJUSTMENT 28AUTO PC ADJUSTMENT 28
    MANUAL PC ADJUSTMENT 29
    PICTURE IMAGE ADJUSTMENT 31IMAGE LEVEL SELECT 31
    IMAGE LEVEL ADJUSTMENT 32
    PICTURE SCREEN ADJUSTMENT 33
    SELECTING INPUT SOURCE 34
    SELECTING VIDEO SYSTEM 35
    PICTURE IMAGE ADJUSTMENT 36
    IMAGE LEVEL SELECT 36
    IMAGE LEVEL ADJUSTMENT 37
    PICTURE SCREEN ADJUSTMENT 38
    SETTING MENU 39
    OPERATING WIRELESS MOUSE 42
    MAINTENANCE 42
    WARNING TEMP. INDICATOR 42
    AIR FILTER CARE AND CLEANING 43
    CLEANING PROJECTION LENS 43
    LAMP MANAGEMENT 44
    LAMP REPLACEMENT 45
    TROUBLESHOOTING 46
    TECHNICAL SPECIFICATIONS 48
    BASIC OPERATION 21
    TURNING ON / OFF PROJECTOR 21
    ADJUSTING SCREEN 22
    ZOOM ADJUSTMENT 22
    FOCUS ADJUSTMENT 22
    LENS SHIFT ADJUSTMENT 22
    KEYSTONE ADJUSTMENT 22
    PICTURE FREEZE FUNCTION 23
    NO SHOW FUNCTION 23
    P-TIMER FUNCTION 23
    SOUND ADJUSTMENT 24
    TRADEMARKS
    Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
    IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
    Windows and PowerPoint are registered trademarks of Microsoft Corporation.
    Each name of corporations or products in the owners manual is a trademark or a registered trademark of its
    respective corporation. 
    						
    							6
    FEATURES AND DESIGN
    This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use.  This
    projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)
    technology.
    Compatibility
    This projector widely accepts various video and
    computer input signals including;
    Computers
    IBM-compatible or Macintosh computer up to 1600
    x 1200 resolution.
    6 Color Systems
    NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-
    N color system can be connected.
    Component Video
    Component video signal, such as a DVD player
    output high definition TV signals including 480i,
    480p, 575i, 575p, 720p, 1035i, 1080i-50 or 1080i-
    60, can be connected.
    S-Video
    S-Video signal, such as a S-VHS VCR output
    signal, can be connected.
    High Resolution Image
    This projector provides 1280 x 1024 dots resolution for
    computer input and 800 horizontal TV lines.  Resolution
    from a computer between SXGA (1280 x 1024) and
    UXGA (1600 x 1200) is compressed into 1280 x 1024
    dots.  This projector cannot display image of over 1600 x
    1200 dots.  When resolution of your computer is over
    than 1600 x 1200, reset a computer output for lower
    resolution.
    Multi-Scan System
    This projector has Multi-Scan System to conform to
    almost all computer output signals quickly.  There is no
    need for troublesome manual adjustment of frequency
    and other settings.
    Keystone Correction
    Positioning height of a projector may result in distorted
    image being displayed in a trapezoid shape.  Keystone
    Correction solves this problem by digitally altering
    projection to produce undistorted images.
    Multilanguage Menu Display
    Operation menu is displayed in; English, German,
    French, Italian, Spanish, Portuguese, Dutch, Swedish,
    Chinese, Korean or Japanese.
    One-Touch Auto PC Adjustment
    Incoming computer video signals are recognized and
    best adjustment is automatically set by Auto PC
    Adjustment.  No complicated setup is necessary and
    projection is always precise.
    Digital Zoom (for Computer)
    Digital Zoom function adjusts image size to approx. 1/4 ~
    49 times of original image size, allowing you to focus on
    crucial information at a presentation.
    Power Management
    Power Management function is provided to reduce power
    consumption while a projector is not in use.  
    This Power Management function operates to turn
    Projection Lamp off when a projector detects signal
    interruption and any button is not pressed over 5
    minutes.  Projection Lamp is automatically turned on
    again when a projector detects signal or any operation
    button is pressed.
    This projector is shipped with this function ON.
    Wireless Mouse
    Remote Control Unit supplied with this projector has
    Wireless Mouse function for a connected computer.  This
    function enables you to operate both projector and
    computer with Remote Control Unit only.
    Digital Visual Interface
    This projector is equipped with DVI 24-pin terminal for
    connecting DVI output from a computer.
    Laser Pointer Function
    Remote Control Unit supplied with this projector includes
    Laser Pointer function.  This function helps you to make
    a smart presentation on a projected screen.
    Progressive Scan Function 
    This function converts interlace video signals into
    progressive scan signals and provide fine picture quality.
    Motor-driven Lens Shift
    Projection lens can be moved up and down with motor-
    driven lens shift function.  This function makes it easy to
    provide projected image where you want.  
    Zoom and focus can be also adjusted with motor-driven
    operation.
    Multi Versatile Platform
    This projector applies various input/output terminals and
    3 terminal slots for expansion to tune to diversity of
    signals from computers and video equipment.
    3-built-in Terminal Slots enable you to arrange any
    combinations of input sources just by changing Terminal
    Boards.  For Terminal Boards, contact sales dealer
    where you purchased a projector.
    Selectable Terminal Slots 
    						
    							7
    PREPARATION
    NAME OF EACH PART OF PROJECTOR
    BOTTOM 
    BACK 
    HOT AIR EXHAUSTED !
    Air blown from exhaust vent is hot.  When
    using or installing a projector, following
    precautions should be taken.
    Do not put a flammable object near this vent.  
    Keep rear grills at least 3’ (1m) away from
    any object, especially heat-sensitive object.
    Do not touch this area, especially screws
    and metallic parts.  This area will become
    hot while a projector is used.
    This projector detects internal temperature
    and automatically controls operating power
    of Cooling Fans.
    FRONT
    LAMP
    COVER
    This projector is equipped with cooling
    fans for protection from overheating.
    Pay attention to following to ensure
    proper ventilation and avoid a possible
    risk of fire and malfunction.
    Do not cover vent slots.
    Keep bottom clear of any objects.
    Obstructions may block cooling air.
    AIR INTAKE VENTS
    PROJECTION LENS
    SPEAKERS
    INFRARED 
    REMOTE RECEIVER
    LENS COVER
    POWER CORD
    CONNECTOR
    EXHAUST VENT
    MAIN ON / OFF
    SWITCH
    INFRARED 
    REMOTE RECEIVER
    CARRYING HANDLE
    ADJUSTABLE FEET
    AIR INTAKE VENT
    Do not turn on a projector with lens cover
    attached. High temperature from light beam may
    damage lens cover and result in fire hazard.
    CAUTION
    AIR INTAKE
    VENT
    EXHAUST VENT
    AIR INTAKE
    VENT 
    						
    							8
    PREPARATION
    SETTING-UP PROJECTOR
    This projector uses nominal input voltages of 100-120 V
    or 200-240 V AC.  This projector automatically selects
    correct input voltage.  It is designed to work with single-
    phase power systems having a grounded neutral
    conductor.  To reduce risk of electrical shock, do not plug
    into any other type of power system.
    Consult your authorized dealer or service station if you
    are not sure of type of power supply being in use.
    Connect a projector with a peripheral equipment before
    turning a projector on.  (Refer to pages 12 ~ 15 for
    connection.) 
    CONNECTING AC POWER CORD
    Connect AC Power Cord (supplied) to
    a projector.
    AC outlet must be near this equipment
    and must be easily accessible.
    To POWER CORD
    CONNECTOR on your
    projector.
    Projector sideAC Outlet side
    Ground
    NOTE ON POWER CORD
    AC Power Cord must meet requirement of country where you use a projector.
    Confirm an AC plug type with chart below and  proper AC power cord must be used.
    If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
    To AC Outlet.(120 V AC)
    For Continental EuropeFor the U.S.A. and CanadaFor the U.K.
    To AC Outlet.(200 - 240 V AC)
    To AC Outlet.(200 - 240 V AC) 
    						
    							9
    PREPARATION
    POSITIONING PROJECTOR
    This projector is equipped with Model LNS-S02 lens. If you use other type of lens, refer to Lens Replacement
    and Installation Manual in this projector and install the lens properly.
    NOTE: Before replacing lens, check where a projector is used and prepare suitable lens. For specifications of a
    Projector Lens, refer to Lens Replacement and Installation Manual in this projector
    LENS INSTALLATION
    When moving or setting up a projector, be sure to replace Lens Cover to protect surface.  And be
    careful not to hold or subject lens to strong forces.  It may damage lens, cabinet, or mechanical parts.
    Projection lens can be moved up and down with motor-driven lens shift function.  This function makes it easy to
    provide projected image where you want.
    LENS SHIFT ADJUSTMENT
    MOVED UP OR DOWN
    Use LENS SHIFT button and
    POINT UP/DOWN button to
    move image up or down.
    (Refer to page 22.)
    This projector is designed to project on a flat projection
    surface.
    ROOM LIGHT
    Brightness in a room has a great influence on picture
    quality.  It is recommended to limit ambient lighting in
    order to provide best image.
    This projector is equipped with cooling fan to protect it from
    overheating. Pay attention to following to ensure proper venti-
    lation and avoid a possible risk of fire and malfunction. 
    Do not cover vents with papers or other materials.
    Keep rear grill at least 3 feet (1 m) away from any
    object.
    Make sure that there are no objects under a pro-
    jector. An object under a projector may prevent a
    projector from taking cooling air through bottom
    vent.
    VENTILATION
    AIR INTAKE VENT
    (FRONT AND BOTTOM SIDE)EXHAUST VENT
    (REAR SIDE)
    SCREEN 
    						
    							10
    PREPARATION
    CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
    Do not drop or bump a projector, otherwise damages or malfunctions may result.
    When carrying a projector, use a suitable carrying case.
    Do not transport a projector by using a courier or transport service in an unsuitable transport case.  This
    may cause damage to a projector.  To transport a projector through a courier or transport service, consult
    your dealer and best case should be applied.
    Use carry handle when moving a projector.
    Replace lens cover and rotate adjustable feet fully
    clockwise.
    Picture tilt and projection angle can be adjusted by rotating
    ADJUSTABLE FEET. Projection angle can be adjusted up
    to 6.9 degrees by rotating Adjustable Feet.
    UP
    UP
    DOWN
    DOWN
    ADJUSTABLE FEET
    PICTURE LEVEL AND TILT ADJUSTMENT
    MOVING PROJECTOR 
    						
    All Sanyo manuals Comments (0)

    Related Manuals for Sanyo Plc Ef30nl Projector User Manual