Sanyo Plc Xl50 Projector User Manual

							
Appendix
Technical Specifications
Mechanical Information
Projector TypeMulti-media Projector
Dimensions (W x H x D)14.72” x 7.75” x 19.49” (374 mm x 196.8 mm x 495 mm) (Not including Rear leg)
Net Weight16.74 lbs (7.6 kg)
Feet Adjustment0˚ to 1.0˚
Panel Resolution
LCD Panel System0.8” P-Si TFT Active Matrix type
Panel Resolution1,024 x 768 dots
Number of Pixels2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV Signal480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning FrequencyH-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
Optical Information
Projection Image Size (Diagonal)Adjustable from 60” to 80”
Projection LensF 1.85 lens with f 4.83 mm with manual focus
Distance (Screen - Projector)-0.131’ – 0.265’ (-4.0 cm – 8.1 cm)
Projection Lamp275 W
Interface
Video Input JackRCA Type x 1
S-Video Input JackMini DIN 4 pin x 1
Audio Input JacksRCA Type x 2
Component Input JacksRCA Type x 3
Computer Input 1 Input TerminalAnalog RGB (Mini D-sub 15 pin) Terminal x 1
Computer Input 2 / Monitor Output TerminalAnalog RGB (Mini D-sub 15 pin) Terminal x 1 (In/Out switchable)
Audio Input Computer JackMini Jack (stereo) x 1
Service Port ConnectorMini DIN 8 pin x 1
Audio Output JackMini Jack (stereo) x 1 (Variable)
Audio
Internal Audio Amp2.0 W RMS
Built-in Speaker1 speaker, ø2.0” (50 mm) 
Power
Voltage and Power ConsumptionAC 100–120 V (3.2 A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (1.6 A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature41˚F–95˚F (5˚C–35˚C)
Storage Temperature14˚F–140˚F (-10˚C–60˚C)
Remote Control
BatteryAA or LR6 1.5V ALKALINE TYPE x 2
Operating Range11.5’ (3.5 m) / ±90˚
Dimensions1.9” (W) x 0.87” (H) x 5.7” (D) (49 mm x 22 mm x 145.3 mm)
Net Weight3.53 oz (100 g) (including batteries)
1 
						

							
Appendix
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
● 
The specifications are subject to change without notice.
● 
LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are 
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD 
panels.
Model No.
SCART-VGA Cable: POA-CA-SCART
VGA-Cable (10 m): KA-MC-DB10
Ceiling Hanger: POA-CHS-PS02 (for low ceiling)
: POA-CHL-PL02 (for high ceiling)
: POA-CHB-XL50
Wall Anchor Kit: POA-CH-EX03
Accessories
Owner’s Manual(CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
Alarm Label
Lamp Replacement Label
Stand
 
						

							
Appendix
Terminal : Mini DIN -PIN
12345876
SERVICE PORT CONNECTOR
R X D
-----
-----
GND
RTS / CTS
GND
GND
Serial
1



5



COMPUTER INPUT / MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red Input / Output
Ground (Horiz.sync.)
Green Input / Output
-----
Blue Input / Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5






5V / -----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC data / -----
Ground /  -----
Vert. sync.
DDC clock/ -----

1
10
1
11
1
15
T X D

Dimensions
Unit: inch (mm)
7.75 (196.8)
7.91 (201)4.50 (114.3)2.36 (60)8.78 (223)9.49 (241)2.99 (76)
3.43 (87)
Lens centerLens center
7.09 (180)
4.29 (109)
8.58 (218)
14.72 (374)
1.0°1.0°
0.17 (4.2)
19.49 (495)16.59 (421.5)
3.65 (92.8)
0.41 (10.5)
0.33 (8.5)
9.37 (238)
0.37 (9.5)
16.73 (425)
7.17 (182)
4.61 (117)
0.63 (16)
1.87 (47.5)
0.63 (16)5.0 (127)

						

							
Model No. XXX-XXXXReplacement Lamp No. XXXXXXType No. XXX-XXXXXX

Appendix
PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
*Should  the  four-digit  number  be  changed, 
the factory set number will be invalid.
PIN Code Lock No.
Logo PIN Code Lock No.
Factory default set No: 1 1 1 1*
Alarm PIN Code No.
Lamp Replacement Label
When  using  the  projector  ceiling-mounted,  put 
the  Lamp  replacement  label  (supplied)  on  in  a 
prominent place of the projector's body to check 
the Replacement Lamp Type Number.
Put the label below (supplied) to a prominent place of the 
projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the
projector’s body while the Antitheft alarm function is set.
While the Antitheft alarm function is set.... 
						

							
SANyO Electric Co., Ltd.KM3A